crosby safety valve factory

Crosby pressure relief valves have maintained leadership in overpressure protection for over 140 years. The direct spring-operated safety and pressure relief valves are among the world’s most widely used for oil and gas production and refining, petrochemical and chemical processing, and conventional and nuclear power. Crosby pressure relief valves maintain the industry’s most extensive and capable flow facilities for testing in air, steam, and water.

Large orifice closed bonnet pressure relief valves. Also available with open bonnet as Styles HS/HSU; and as large orifice pilot operated pressure relief valves. Style JPV-A, for air, gas and steam. Ask for Catalog No. 307. Specifications:

A unique, completely sealed pressure relief valve for transportation and storage of chlorine and other toxic and corrosive fluids. Ask for Catalog No. 306. Specifications:

A sanitary pressure/vacuum pressure relief valve for the beverage, food processing and pharmaceutical industries. This valve provides three modes of self actuated operation:

Non-flowing, snap-acting, pilot operated, pressure relief valves. High performance valves for overpressure protection of pipes and vessels containg gases and vapors. Ask for Catalog No. 318. Specifications:

Non-flowing, modulating, pilot operated, pressure relief valve. Used for overpressure protection of gas, vapor, liquid and steam. Mounted on the same main valve used with Style JPV. Ask for Catalog No. 318. Specifications:

Non-flowing, modulating, pilot operated, pressure relief valve. Used for overpressure protection of high temperature fluids including hydrocarbons, inert gases and steam. Ask for Catalog No. 318. Specifications:

Pressure relief valve with single trim for liquid, gas and steam service. Precision lapped flat metal to metal seats or elastomer and TFE O-ring soft seats provide the ultimate in seat tightness. Blowdown is typically less than 20%. Capacities certified by National Board of Boiler and Pressure Vessel Inspectors. Ask for Catalog No. 902. Specifications:

Series 800 pressure relief valves are designed for use on air, gas, vapor and steam service. External precise blowdown control provides shorter blowdown then the Series 900, typically in the range of 5 to 15 percent. Capacities certified by National Board of Boiler and Pressure Vessel Inspectors. Ask for Catalog No. 902. Specifications:

Nozzle type safety valve for saturated and superheated steam service. Seat tightness up to 95% of valve set pressure. Ask for Catalog No. 408. Specifications:

Protect superheaters from overheating during startup, prolong the life and reduce maintenace of safety valves. Ask for Catalog No. 403. Specifications:

Crosby pressure relief valves have been on the forefront of overpressure protection for more than 140 years. The direct spring-operated safety and pressure relief valves are among the world’s most widely used in oil and gas production and refining, petrochemical and chemical processing, and conventional and nuclear power industries. Crosby pressure relief valves uphold the industry’s most extensive and capable flow facilities for testing gas, liquid, steam and multi-phase applications.

Crosby is part of Emerson’s pressure relief portfolio, a complete range of standard and customized solutions, whatever need you have for overpressure protection.

Emerson is an industry leader in pressure relief valve technology. A single point provider, they offer an extensive product range for reliable performance with lower valve life-cycle costs and unique solutions. Their unrivaled engineering and technical expertise results in pressure management products, application solutions and services that can positively affect your business, safety, operations and the bottom line. Their engineering teams have designed testing equipment and procedures that assure optimum valve performances under all service conditions.

Facilities have cryogenic flow testing capabilities down to -320°F / -196°C, and flow steam testing, making them amongst the largest in the world that are used for research, experimentation and control of emissions on relief valves, like Crosby’s.

Crosby’s H-Series direct spring-operated safety valves are the trusted and proven solution to thorough overpressure protection for steam safety applications such as economizers, steam drums, superheaters, reheaters and more.

Crosby’s J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design.

Crosby leads the way in pressure relief valve technology. Explore high quality and dependable overpressure protection and phase applications in their catalog of relief valves.

Anderson Greenwood Crosbyr its acquisition of New England-based Crosby Valve Co., Anderson Greenwood has relocated production, and built a modernized plant, in Stafford, TX, its headquarters. The new capacity is dedicated primarily to the Crosby Style JOS pressure-relief valve line (see Fig. 1), said to be the most popular model on the market today.

According to Chris Fadden, a company spokesman, (AGCO) has not only invested in new production, but has also updated the valve design, and is now providing an enhanced customer-service capability. The JOS-E (for "enhanced") valve, in particular, can now handle higher processing severities than preceding models. The production facility has new machining tools (fig. 2), new quality and inventory-control systems, and expedited delivery capability. AGCO had previously unveiled the "Pronto PRV" hot-line service; customers can simply dial 1-877 333 AGCO (2426) to place orders, check order status, and get follow-up service.

The JOS-E (along with other styles, JBS-E and JLT-E) valves provide overpressure protection in air, gas, steam, vapor and liquid service in the process, refining, and power industries. They are available with flat metal-to-metal seats or soft seats for optimum tightness and minimal maintenance.

Together, Anderson Greenwood and Crosby represent 125 years of valve development; Crosby was founded in 1874 to supply the power industry, and Anderson Greenwood in 1947 as an aircraft component supplier. It claims to have the largest range of PRV offerings that meet ASME Section VIII standards. AGCO is a division of Tyco International.

Consolidated Safety-Valve Co. v. Crosby Steam Gauge & Valve Co., 113 U.S. 157 (1885), was a patent case to determine validity of patent No. 58,294,safety valves.

Richardson was the first person who made a safety valve which, while it automatically relieved the pressure of steam in the boiler, did not, in effecting that result, reduce the pressure to such an extent as to make the use of the relieving apparatus practically impossible because of the expenditure of time and fuel necessary to bring up the steam again to the proper working standard.

His valve was the first which had the strictured orifice to retard the escape of the steam and enable the valve to open with increasing power against the spring and close suddenly, with small loss of pressure in the boiler.

The direction given in the patent that the flange or lip is to be separated from the valve seat by about one sixty-fourth of an inch for an ordinary spring, with less space for a strong spring and more space for a weak spring, to regulate the escape of steam as required, is a sufficient description as matter of law, and it is not shown to be insufficient as a matter of fact.

Letters patent No. 85,963, granted to said Richardson January 19, 1869, for an improvement in safety valves for steam boilers or generators, are valid.

The patents of Richardson were infringed by a valve which produces the same effects in operation by the means described in Richardson"s claims, although the valve proper is an annulus and the extended surface is a disc inside of the annulus, the Richardson valve proper being a disc and the extended surface an annulus surrounding the disc, and although the valve proper has two ground joints, and only the steam which passes through one of them goes through the stricture, while, in the Richardson valve, all the steam which passes into the air goes through the stricture, and although the huddling chamber is at the center instead of the circumference, and is in the seat of the valve, under the head, instead of in the head, and the stricture is at the circumference of the seat of the valve instead of being at the circumference of the head.

The fact that the prior patented valves were not used and the speedy and extensive adoption of Richardson"s valve support the conclusion as to the novelty of the latter.

Text of Consolidated Safety-Valve Co. v. Crosby Steam Gauge & Valve Co., 113 U.S. 157 (1885) is available from:CourtListenerGoogle ScholarJustiaLibrary of Congress

The Crosby OMNI-TRIM pressure relief valve is the proven solution for overpressure protection and/or thermal relief applications on air, gas, vapor, liquid and steam. Its simple design makes it ideal for refineries, chemical and petrochemical plants, power plant auxiliary systems and pulp and paper mills.

EMERSON. CROSBY H-SERIES DIRECT SPRING SAFETY VALVESDirect spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applicationsFEATURES HCI ISOFLEX" • ASME/NB certified capacities for steam. • Set and tested on steam. • Full nozzle flanged option. • Restricted lift for customized capacity. • Long service life. • Low maintenance. • Two ring set pressure and blowdown control. • ISOFLEX seat tightness up to 93%. For seat tightness greater than 93% consult factory. TECHNICAL DATA GENERAL APPLICATION H-Series direct spring operated safety valves are the proven solution for comprehensive overpressure protection on steam safety applications including economizers, steam drums, superheaters, reheaters and more. Sizes: Orifices: Connections: Temperature range: Set pressures: IVi" F IV2" to 6" RR 10" 0.307 to 19.29 in2 (1.98 to 124.45 cm2) Flanged or welded inlet 1120 °F (604 °C) 15 to 5000 psig (1 to 345 barg) Code: ASME Boiler and Pressure Vessel Code Section I, and Section VIII Emerson.com/FinalControl © 2017 Emerson. All Rights Reserved VCTDS-00595-EN 17/11

Complete overpressure protection for ASME B&PVC Section I A complete safety valve package for utility and industrial steam generators and steam systems. • Boilers with design pressures to 3000 psig (207 barg). • Valves designed to increase plant up-times, extend maintenance intervals and increase total valve life. Steam System Components 7. Boiler feed water pump 8. Cold reheat inlet VALVE SELECTION APPLICATIONS AND RECOMMENDED™ VALVE SELECTION NOTES 1. Selection matrix shows valves in optimum locations - Styles HSJ and HCI may be interchanged to suit a specific application or to obtain a...

STYLE HE ISOFLEX® Style HE ISOFLEX® safety valves are high pressure, high capacity reaction type valves designed specifically for saturated steam service on boiler drums with design pressures above 2000 psig (138 barg) up to critical pressure. FEATURES TECHNICAL DATA • Extends Up-time - ISOFLEX® seat tightness to 93% of set pressure ensures maximum generating times, extending maintenance intervals. For seat tightness greater than 93% consult factory. • Reduces Maintenance Costs - Exceptional seat tightness minimizes maintenance resources and repair times and reduces spare parts purchase and...

PRODUCT OVERVIEW The HE ISOFLEX incorporates our latest field proven seat tightness design which allows boilers to operate close to set pressure without leakage across the valve seat. The HE ISOFLEX also has a unique patented eductor control that permits the valve to attain full capacity lift at a pressure 3% above popping pressure to the requirements of Section I of the ASME Boiler and Pressure Vessel Code. APPLICATION The HE ISOFLEX safety valve is a high pressure, high capacity reaction type valve, designed specifically for saturated steam service on boiler drums having design pressures...

CROSBY H-SERIES STYLE HE ISOFLEX 28 Part name Body Nozzle Nozzle ring Nozzle ring set screw Disc insert Disc holder Disc holder retaining nut Eductor Guide ring Guide ring set screw Spindle assembly Piston Piston retaining ring Spindle nut Bonnet Bonnet studs Bonnet stud nuts Material Carbon steel SA-216 Gr. WCC Stainless steel Stainless steel Stainless steel Inconel® Nickel alloy Stainless steel Nickel alloy Stainless steel Stainless steel Stainless steel Nickel alloy Steel Steel Carbon steel SA-216 Gr. WCC Alloy steel SA-193 Gr. B7 Steel SA-194 Gr. 2H Bottom spring washer Top spring...

2500 psig maximum pressure 1. These style designations are for standard welded inlets. For optional CL 2500 flanged inlet valves, the "W" is dropped from the style designation. 2. Weld prep per customer"s specifications. Safety valves must be mounted on a nozzle with an inlet diameter equal to or greater than the nominal valve inlet size, dimension A. See ASME boiler and pressure vessel code Section I and ANSI/ASME B31.1 for recommended installation. 3. Bolt holes straddle centerline on flanged connections. 4. Dismantling height: an additional 20 inches (508 mm) is required. Drain: main...

1 Increases Operating Efficiency Sizes: - Restricted Lift Option for customized capacity, reduced reaction forces, and boiler design standardization Orifices: - Seat tightness up to 93% of valve set pressure. For seat tightness greater than Connections: 93% consult factory - Two ring control to adjust overpressure and Maximum blowdown independently temperature: - May also be used for ASME Boiler and Maximum Pressure Vessel Code Section VIII off boiler set pressure: steam applications for higher operating Codes: pressures 1 Reduces Maintenance Costs CROSBY H-SERIES STYLE HCI ISOFLEX DIRECT...

CROSBY H-SERIES STYLE HCI ISOFLEX PRODUCT OVERVIEW The HCI ISOFLEX safety valve is a high capacity nozzle type valve suitable for saturated and superheated steam service. The valves are available in inlet sizes of 1½”, 2", 2½”, 3", 4" and 6" and in orifice sizes H2 to RR specifically designed for the power industry. Welded inlets and flanged outlets are standard, with flanged inlets (1) with full (removable) nozzles (2) also available. Blowdown control is precise with two adjustable rings (3 and 12) - one each on the nozzle (1B or 2) and guide (11). Blowdown may be adjusted from 2 to 4%...