60 psi safety valve for sale

Air compressor tank safety valve. This valve is rated to 60 psi and has a maximum CFM discharge rating of 59cfm. This valve utilizes 1/4" NPT Male threads.

Brand new, certified 1/4" male NPT 60 PSI Industrial air compressor / tank pressure safety relief valve. Also known as a "Pop Off" or "Blow Off" valve. This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols. The relief pressure of this valve is set at 60 PSI and is accurate within + or - 3% of the set pressure.

• This valve will relieve 59 SCFM• Valve Inlet Threads: 1/4" Male NPT (measures about 1/2" in diameter)• Total Valve Length: 1-3/4"• Installation Wrench Size: 11/16"• Features a silicone rubber soft seat relief valve to prevent leaks•Max temperature: 250° F• Solid Brass Construction• Top quality made in the U.S.A• Manufactured by Conrader

AllAutomotiveCleaning EquipmentEducation & Teaching SuppliesElectrical & LightingElectronicsFarm & RanchHand ToolsHealth Care & BeautyHVAC/R Equipment & FansKitchen & Bath FixturesLab & ScientificLawn & GardenMachines & Power ToolsMarine ElectronicsMarking ToolsMaterial Handling EquipmentMeasuring & Layout ToolsMed Equipment & SuppliesMusical InstrumentsNetworking & WiringOffice Electronics & SuppliesOpticsPlumbingPrinters & ScannersProcess Control & AutomationRestaurant & Food ServiceRetail EquipmentSafetySealants & TapesSecuritySewing EquipmentSoftwareSports & OutdoorStage EquipmentTest EquipmentWelding & Soldering Equipment

AllAutomotiveCleaning EquipmentEducation & Teaching SuppliesElectrical & LightingElectronicsFarm & RanchHand ToolsHealth Care & BeautyHVAC/R Equipment & FansKitchen & Bath FixturesLab & ScientificLawn & GardenMachines & Power ToolsMarine ElectronicsMarking ToolsMaterial Handling EquipmentMeasuring & Layout ToolsMed Equipment & SuppliesMusical InstrumentsNetworking & WiringOffice Electronics & SuppliesOpticsPlumbingPrinters & ScannersProcess Control & AutomationRestaurant & Food ServiceRetail EquipmentSafetySealants & TapesSecuritySewing EquipmentSoftwareSports & OutdoorStage EquipmentTest EquipmentWelding & Soldering Equipment

Full DescriptionLever Type; ASME mil-V-18634B Type I Class 3A Applicable Standard; Hot Water Boiler Application; 250 Deg F Temperature Rating; Non-Mechanical Seat to Disc Alignment Inclusions/Features; Bronze Body Material; 60 psi Pressure Rating; 3/4 Inch Female X 3/4 Inch Female End Connection; 3/4 Inch Inlet Size; 3/4 Inlet Size - Fractional; 3/4 Inch Outlet Size; 30 to 150 psi Set Pressure Range; WATTS[R] Brand; Weight 1.5 lb; Size 2 1/2 Inch L X 5 1/8 Inch H; 174A Model

The Cash Acme F-82 is a pressure-only ASME safety relief valve designed for use on hot water space heating boilers, water supply heaters and storage tanks. The Cash Acme F-82 Safety Relief Valves are designed for use on hot water service only and are not to be used on steam.

This 3/4 inch boiler pressure relief valve is used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. It resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief, not as an operating control. The pressure setting is 60 psi (4.13 bar), with corresponding high ratings from 650,000 to 14,370,000 BTU/hr.

Choose these valves for small steam-heating boilers requiring pressure relief between 5 psi and 12 psi. They spring fully open at the set pressure and remain open until the system pressure is restored below the set pressure. All have a bronze body for durability and a long service life.