frigidaire gas oven safety valve manufacturer

These valves do not fail very often. Normally the problem is with the ignitor not drawing enough amperage to open the valve. Even if the ignitor is glowing orange it is likely still the cause of the burner not igniting. Technicians refer to this as a "weak" igniter.

Dual gas safety valve assembly. The gas oven safety valve works with the oven igniter to provide gas to the burner. If the safety valve fails, the oven won’t heat. Since safety valves rarely fail, be sure to check more commonly defective parts before replacing the safety valve.

These valves do not fail very often. Normally the problem is with the ignitor not drawing enough amperage to open the valve. Even if the ignitor is glowing orange it is likely still the cause of the burner not igniting. Technicians refer to this as a "weak" igniter.

These valves do not fail very often. Normally the problem is with the ignitor not drawing enough amperage to open the valve. Even if the ignitor is glowing orange it is likely still the cause of the burner not igniting. Technicians refer to this as a "weak" igniter.

These valves do not fail very often. Normally the problem is with the ignitor not drawing enough amperage to open the valve. Even if the ignitor is glowing orange it is likely still the cause of the burner not igniting. Technicians refer to this as a "weak" igniter.

These valves do not fail very often. Normally the problem is with the ignitor not drawing enough amperage to open the valve. Even if the ignitor is glowing orange it is likely still the cause of the burner not igniting. Technicians refer to this as a "weak" igniter.

FGF337BCG, FFGF3011LWJ, 79070503013, FGF337GCE, Gibson, White Westinghouse, FFGF3011LBC, FFGF3047LSH, Kelvinator, Tappan, FFGF3019LBA, UNIVERSAL/MULTIFLEX (FRIGIDAIRE), FGF348KMB, 79071313708, FGF348KSK, LFGF3014LBC, FGF337GCG, FGF328GMD, Crosley, MGF345CESD, Kenmore, FFGF3052TSA, FGF337ASE, Frigidaire, FFGF3016TBA, 79073032313, FFGF3012TWA

Unplug the range and shut off the gas supply before installing this part. Gas line connections must be properly leak checked after this repair. Wear work gloves to protect your hands.

Gas safety valve can be used on some models of Frigidaire Ranges / Ovens / Stoves including: Tappan, Westinghouse, GIbson, Kelvinator and other brands.

Thank you for your question. You may want to check the temperature sensor inside of your oven, your igniter, and your spark module to determine which part is not working. You can test these parts with a multi meter to be sure. Good luck with your repair.

Hello John, thank you for contacting us. That sounds like a bad igniter or a bad safety valve. The gas valve will only open based on the power draw from the igniter, so it may glow but the gas valve will not open to light it. If you are smelling gas then the valve may still be opening even though the igniter is not drawing enough power, or the igniter is also faulty and not able to ignite the gas. You may want to replace both parts. Hope this helps!

Hello Toby, Thank you for the question. With the information provided, this sounds like it could be a faulty Safety Valve and it should be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Will this fit my Frigidaire gas oven? The oven igniter draws about 3.5amps but the oven Flame is very small and it takes about 50 minutes to reach 350f. The broil igniter draws the same current and it has a large blue Flame. Could it only this half of the safety valve only that is defective?

No, but dual safety valve Part Number: PS977703 is in the list of compatible items for your model. Hope this helps. Please contact us anytime. This safety valve is a dual one so it should take care of your problem.

Hello Jose, Thank you for the question. You will need to Re-adjust Oven Air Shutter until you have the proper flame height and color. Hope this helps!

Hello Randall, thank you for your question. The orifices for liquid propane are different than the ones for natural gas. The Natural Gas to Liquid Propane Conversion Kit for your model is part number PS2351422. It contains all of the necessary orifices you will need. There are no parts involved with converting the Regulator, you just need to block it open. We have a video explaining this. Here is a link: https://www.youtube.com/watch?v=2GScQhrgC3g. I hope this helps and good luck with your repair!

Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!

316075103 Frigidaire Electrolux Range Oven Bake Lower Unit Heating ElementOven Bake part number : CH6078.Replacement for numbers : 316075100, 316075102, 316075103, 3203534, AP4356505 and PS2332301...