ari safety valve factory

ARI can look back on a tradition of more than sixty years as a partner for control, isolation, safety and steam trapping of liquid and gaseous media. Are you looking for product solutions specially tailored to your individual requirements? Profit from our "one-stop shop" philosophy.

ARI can look back on a tradition of more than seventy years as a partner for control, isolation, safety and steam trapping of liquid and gaseous media. Are you looking for product solutions specially tailored to your individual requirements? Profit from our "one-stop shop" philosophy.

Direct Loaded Safety Valves for blowing off excess pressure of steam, vapor, gases, and liquid from pressure vessels, steam boiler, hot water boiler and piping systems. ARI-SAFE safety valves are available in full-stroke and normal versions.

Our safety valves are available with metal or soft seated plugs, with precise centering and guiding. Materials include cast iron, cast steel, and stainless steel. Call us for further options!

We specialize in thermal heat transfer fluid (hot oil) valves, known in the ARI-Armaturen family as the FABA product line. These are commonly found anywhere heat transfer is required whether for the manufacture of engineered wood, chemicals, automobiles, coatings, fibers and non-woven textiles, asphalt, industrial cooking, and a host of other industries. Other ARI-Armaturen products are found in similar applications and industries, and we can assist you with these as well.

The ARI-REYCO line from ARI Armaturen features a range of direct spring acting safety relief valves for gas, liquid, and steam service. As a distributor for ARI-Armaturen, Cross company offers a variety of options to keep your operation safe and our team of experts have worked with customers in a wide range of process applications across multiple industries.

With such a variety of options available, finding the right solution is important. We can work with your team to determine the best product for your operation. Learn more about ARI-REYCO series safety relief valves below and Start a conversation with a Cross expert today!

*ARI-REYCO brand valves (and/or valve parts) are fully interchangeable with, and replaceable for, Lonergan valves (and/or valve parts). Londergan is a trademark of Pentair Valves and Controls. ARI-Reyco is not licensed to use the Lonergan trademark.

Safety Relief Valve /Applications: Industrial installations, processing technology, plant manufacturing, etc.Safety Relief Valve /Mediums: Steam, neutral gases, vapours and liquids

Safety Relief Valve /Applications: Chemical Industry, processing industry, plant manufacturing.Safety Relief Valve /Mediums: Steam, neutral gases, vapours and liquids

ISO 9001 certified distributor of valves including bellow seal, DIN/ANSI control, safety, pressure regulating, reducing, strainers, check, butterfly, flow regulatory, manual and actuated valves and steam traps. Applications include isolating, securing and regulating thermal oil, feed water, hot and cold fluids, vapor, chemicals, gases and steam. Steam traps include ball float, bimetallic, thermostatic and thermodynamic. Control valves available with electric and pneumatic actuators. Safety valves available in full-stroke and normal versions. Materials include stainless, cast, and forged steel, and cast iron. Actuators include diaphragm, electric, pneumatic and manual. Valve applications include car manufacturing, ships, chemicals, food processing, industrial installation, powerstations, fuel/gas purification plant, gas supply, heating, cooling, freezing, and steam systems, and processing technology. Meets ANSI and European pressure ratings.

ARI products are in service around the globe. Whether it is manufacturing cars, ships, chemicals, food processing or heating technology, you will find ARI where any fluid, liquid, gas or vapor needs to be isolated, secured or regulated. As a perennial member of more than 30 representatives on all continents around the globe, we can provide you with the advantages of a reliable partnership – wherever you are.

Two hands safety valve, which allows a safety use of two hands pneumatic controls (for example two push-button 3/2 N.C. to a certain distance) excluding false signals ...

... -start valve with Series MX2 air treatment units without the need for additional connection interfaces. The soft-start valve is positioned upstream of the safety valves, ...

The S50 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses and/or injured ...

The S100 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses and/or injured ...

The main purpose of the safety relief valve SL 5 is to relieve small pressure increases and quantities in the controlled system to prevent the safety shut-off valve from ...

Material: Body- CF8M; Valve Seat- CF8M Métal Seat, PTFE Soft Seat available Orifice Size: fc"(15mm), 3/4M(20mm), l"(25mm), l1/4,’(32mm)I ltë”(40mm), ...

PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very ...

130 Series Safety valves are also available as Relief valves. Relief valves, identified by the letter R after the type number, are devices with an operational function, ...

Cryogenic Safety Valves Type 06011 is made with stainless steel. It is provided as a safety device for protection against thermal expansion in pipework and parts of facilities. ...

The ARI SAFE safety relief valves design according to EN ISO412-1, TRD 421 and AD2000-A2, Tested according to TUV.SV.-663.D/G/F are an economical and high capacity safety relief valve for the protection of pressure systems.

Options available upon request include different body configurations e.g. closed lifting device, stainless steel bellows, changeover valves, soft sealing discs, proximity switches and special flange drillings. Larger sizes available upon request.

If you are not sure of the size, you require for your process please do not hesitate to get in contact with our Technical Sales team who will be able to size the correct valve for your process.

Kunkle Relief Valve OverviewWhen it comes to industrial and commercial safety and relief valve products, Kunkle’s valve’s catalog is second to none in steam, air, gas, and liquid applications.

Kunkle relief valves range in size from ¼” NPT to 6” flange and are suitable in cryogenic and high temperatures up to 800°F environments at vacuum to 7,500 psig pressure. Kunkle Valve’s code certifications meet several global and national board standards, including ASME Section I, Section IV, and Section VIII, PED, CRN, TU and Chinese, as well as non-code requirements.

Relief Valves for Steam ServiceSteam supplies heat for industrial and chemical processes and also is used to heat buildings, supply mechanical energy, and drive mechanical equipment. Steam moves from the boiler to the end point, then heats by direct heating or indirect heating through a heat exchanger. Kunkle steam relief valves are critical to protecting equipment such as boilers, steam lines, and pressure valves, from being over-pressurized.

Relief Valves for Air ServiceKunkle designs valves for air service, for example for air compressors in mechanical shops and small factories where either low-pressure or high-pressure air is required. NASVI stocks Kunkle relief valves for air service in iron, steel and bronze for a variety of uses.

Relief Valves for Liquid ServiceKunkle also makes valves for liquid service, which provide bypass relief in a variety of applications and liquid types.

More About KunkleKunkle Valve is a renowned pressure relief valve manufacturer. Erastus B. Kunkle invented the safety valve to prevent overpressure in locomotive engines. Kunkle patented it in 1875. Since that time, Kunkle has earned its reputation for high-quality valves, and other equipment manufacturers ship their products with Kunkle’s valves pre-installed.

NASVI has stocked Kunkle safety relief valves since we opened in 1975, so we are confident when we call ourselves Kunkle safety valve experts. Every day we fulfill orders for our customers looking for Kunkle relief valves for steam, air, gas, and liquid applications.

With more than 1,050 employees and 130,000 safety valves produced per year, LESER is the largest manufacturer of safety valves in Europe and one of the leading companies in its industry worldwide.

LESER offers spring loaded and pilot operated safety valves for all industrial applications according to the Pressure Equipment Directive and ASME XIII. Major companies in the chemical, oil and gas, petrochemical, energy, technical gases, LNG/LPG, pharmaceutical, food and beverage, shipbuilding and heating and air conditioning industries use LESER safety valves.

LESER safety valves are developed for the international market in Hamburg and manufactured in the modern plant in Hohenwestedt/Germany. In addition, LESER produces safety valves to the same standards in India and China for the local markets. Nine subsidiaries and offices in Europe, America, the Middle East and Asia as well as authorized contacts in over 80 countries guarantee competent customer advice and fast, reliable deliveries.

ARI globe valve is a line industrial valve is installed into the pipeline system with the purpose of controlling the opening and closing of the fluid flow in the system.

ARI globe valve is a line of globe valves manufactured by ARI manufacturer whose full name is ARI-Armaturen GmbH & Co. KG. Is a German company specializing in the production of specialized control valves for high temperature transmission applications. Valve products specialize in providing for industrial applications such as automotive, marine, chemical, food processing...

ARI company was established in 1950 in Germany with more than 70 years of development, ARI is a famous company for control valves, safety valves, steam traps… used with both liquid and gaseous media. .

After more than 70 years of development, ARI has expanded its business to many countries in Asia and Europe, America, with fifteen subsidiaries in countries such as UK, Denmark, Finland, Austria, France, USA, China, Malaysia, Singapore, Russia, Spain, India, Italy….

1950 ARI-Armaturen GmbH & Co.KG was first established by Albert Richter with the main products being cast iron control valves with sizes from DN15 to DN100.

Valve disc: The valve disc of the ARI globe valve series with materials from cast iron, copper, steel, stainless steel. The valve disc moves up and down with the movement of the shaft.

In systems that need to control the flow, it is necessary to install a device to control it, then industrial valves can be selected such as globe valves, gate valves, butterfly valves, ball valves.

Depending on the specific needs to choose the right type of valve for the system, for the globe valve line, when it needs to be used for regulating operation, globe valves are usually installed in these systems.

ARI globe valve is designed with a variety of lines, models, types, this helps users have many options for their system, there are many types of system, a line of globe valves cannot be installed. suitable for all systems, ARI has produced a wide range of globe valves to suit each individual system. This also helps prolong the life of the valve, when installed appropriately for operation.

ARI globe valve with the main function is to adjust the flow and regulate the flow of fluid in the system. Compared with the gate valve or butterfly valve, the regulating function of the globe valve is more stable.

ARI globe valve needs to be installed in the specified direction, because the design of the globe valve has two chambers with the valve body, so when installing this globe valve, it is necessary to pay attention to the installation direction of the globe valve already specified on the valve body. .

Globe valve has high flow resistance, when the fluid flows through the globe valve, it often loses a certain amount of pressure. Therefore, globe valves are often installed in systems that do not consider the pressure level of the flow.

ARI globe valve with design from quality material line, two main material lines used for valve casting are cast iron material line and steel material line.