ari safety valve manual quotation

The ARI SAFE safety relief valves design according to EN ISO412-1, TRD 421 and AD2000-A2, Tested according to TUV.SV.-663.D/G/F are an economical and high capacity safety relief valve for the protection of pressure systems.

Options available upon request include different body configurations e.g. closed lifting device, stainless steel bellows, changeover valves, soft sealing discs, proximity switches and special flange drillings. Larger sizes available upon request.

If you are not sure of the size, you require for your process please do not hesitate to get in contact with our Technical Sales team who will be able to size the correct valve for your process.

Safety Relief Valve /Applications: Industrial installations, processing technology, plant manufacturing, etc.Safety Relief Valve /Mediums: Steam, neutral gases, vapours and liquids

Safety Relief Valve /Applications: Chemical Industry, processing industry, plant manufacturing.Safety Relief Valve /Mediums: Steam, neutral gases, vapours and liquids

The ARI-REYCO line from ARI Armaturen features a range of direct spring acting safety relief valves for gas, liquid, and steam service. As a distributor for ARI-Armaturen, Cross company offers a variety of options to keep your operation safe and our team of experts have worked with customers in a wide range of process applications across multiple industries.

With such a variety of options available, finding the right solution is important. We can work with your team to determine the best product for your operation. Learn more about ARI-REYCO series safety relief valves below and Start a conversation with a Cross expert today!

*ARI-REYCO brand valves (and/or valve parts) are fully interchangeable with, and replaceable for, Lonergan valves (and/or valve parts). Londergan is a trademark of Pentair Valves and Controls. ARI-Reyco is not licensed to use the Lonergan trademark.

I.S.S. INDUSTRIAL AND SHIP SERVICES BV offers various types of ARI Armaturen valves. Below you can find a small selection of the types of the ARI Armaturen valves that we can offer you:

The ARI Armaturen TEMPTROL thermal closing valve, Type: 22.772 DN40 Kvs22. This temperature controller of ARI Armaturen is used for industrial and marine heating systems. It is used to reduce the

flow of fluid, gas or vapour media with rising sensor temperature, when used in heating systems. The thermal closing valve consists out of a Bonnet valve, a sensor, a set-point indicator, an

The ARI Armaturen safety valve ARI-SAFE, Type: 901. This full lift safety valve is used to keep the pressure in a system from going above the indicated maximum pressure point.

The ARI Armaturen control valve STEVI, Type: 441. This electric actuator comes with an ARI-PREMIO or an ARI-PREMIO-Plus in 2,2-25kN. These valves are used in industrial and marine installations,

The ARI Armaturen ARI-PREMIO electric actuator, Type: 2,2kN. This thrust actuator to move and control the valves in an industrial or marine system. It works together with the STEVI 441 control

The ARI Armaturen ARI-SAFE-TC standard safety valve for the heating technology. This valve has a EPDM-disk with a soft seal insert. The valve works with an open lifting device with a closed

Distributor of hydraulic press safety, quick opening safety, rotary and safety valves. Amerigear®, Boston Gear®, Carlisle®, DeMag®, Desch® and IMI Norgren®, pneumatic, double action, quick release and flow control valves also provided. Repair and preventative maintenance services are offered. Value added services such as custom barcoding, CAD capabilities, OEM assembly, plant surveys and third party logistics are also available. Serves the metal processing, metal service center, paper mill and paper converting, canning, grinding, commercial laundry, marine, oil and gas and material handling industries. Vendor managed inventory (VMI) programs available. Kanban delivery.

Project: Gas mixing panel Gas: Oxygen Pressure Safety Valve Size: G3/8” or ½” + Material: Brass or Equivalent suitable oxygen service + Set pressure: 170 bar + Working pressure: 150 bar + Q’ty: 1 Pc - Document request: + Detail drawing with a material component + Certification oxygen cleaned + Certificate type approval for Oxygen

Manufacturer of valves for gas, liquid, and steam applications. Products include control valves, pressure control, temperature control, globe valves, butterfly valves, check valves, safety relief valves, changeover valves, steam traps, pump traps, mechanical condensate pumps, collection & distribution manifolds, strainers, vacuum breakers, and complete engineered systems. Control valves available in electric or pneumatic configurations. Actuators include diaphragm, electric, pneumatic, and manual. Globe valves available with gland or bellows sealing. Butterfly valves in soft sealing, double-offset, and triple-offset configurations. Safety relief valves available in semi-nozzle or full-nozzle design. Steam traps include float & thermostatic, thermodynamic disc, bimetallic, and thermostatic, in standard configurations, with All-in-One Multi-Valving technology, or with Universal Connections. Markets include food & beverage, powerplants & renewable energy, steelworks & metallurgy, wood/pulp/paper, tires, refrigeration, oil & gas, plant engineering, shipbuilding, and HVAC. Valve applications include the isolation, securing, and regulating of thermal oil, feed water, hot & cold fluids, hydrogen, chemicals, alcohols & polymers, vapor, gases, and steam. Meets ANSI and European pressure ratings. Certified to ISO 9001:2015, ASME Boiler & Pressure Vessel (BPVC), National Board UV & VR, PED (2014/68/EU), CRN, and others.

ARI-Armaturen can look back on a tradition of more than 60 years as a specialist for valves & components. In 2002, ARI-Armaturen USA was established in Houston, Texas to provide a growing North American customer base with localized support and inventory.

From industrial processes and chemicals through shipbuilding to building management, whether standard constructions or custom-made, our broad product portfolio of industrial valves and services linked to control, isolation, safety, and steam trapping always provide the best solutions. Product development, manufacturing, and rigorous testings are always done with state-of-the-art technologies and quality control processes.

From the raw water intake to the filtration plant to the finished waster distribution and storage system, GA Industries valves have been providing dependable service in large and small water systems. GA Industries pump control, check and relief valves mitigate damaging pressure surges and eliminate slam and bang that can result from the operation of water pumps.

Air trapped in water pipelines can reduce system efficiency and exacerbate pressure surges. Our wide range of automatic air valves ensures we have the right valve to maintain an air free system.

And when it’s necessary to isolate a pump, process or section of pipeline, you can depend on GA Industries butterfly valves for reliable flow shutoff.

Originally known as J.E. Lonergan Valve Company of Philadelphia, Lonergan Valves has undergone a series of owners, but the original Lonergan safety relief valve SRV and pressure relief valve PRV have maintained their integrity. Ownership has gone from Pentair to Reyco, from Reyco to Tyco

The original product line included Navy valves, pressure gauges, steam whistles, oiling devices, water level gauges SRV’s and PRV’s, is now just safety relief valves SRV, and pressure relief valves PRV.

Original J.E. Lonergan Valve Company series model numbers: ABS, ABB, ACA, AAA, FBF, FBT, FBA, D, DB, DO, GIF, GBF, L14, JL14, L40, JL40, L41, DH, EIF, BBJ, LCT-14, LCT-40, DS, R, BBJ, BIA, BCA, BAS, YBJ, YIA, H, HK, HU, TBB, HCA, HSS, VAK, have now taken on new part numbers, but designs remain the same. There are also a series of interim numerical codes that have now been replaced. 11-H-200, 12-H-200, 13-H-200, 14-H-200, 23-H-200, 34-H-200, 41-H-200, 42-H-200, 44-H-200, 41-W-200, LCT-20, LCT-11, 11-W-200, 15-W, ARV, HDF, FSS, T, TR, TL, TLG, HRV, HRN, HRX, HTC, T-DP, 13-W, and 43-W. For Datasheets for these models, accurate detailed information is available in the form of pdf or an electronic data manual that contains individual technical data sheets to support the selection of valve.

When replacing a Lonergan Valve it is important to obtain inlet and outlet sizes, end connections, set pressure, coding requirements (for capacity of steam Lbs./hr, an air of gas cfm, or liquid, GPM values). Inlet and outlet flange class options are Class 150, 300, 600, 900, 1500, 2500, and 4500. If Ring Type Joint (RTJ) is required, please specify. Buttweld end or socket weld end connections must include bore schedules when generating an RFQ or order. They are available as standard, 40, 60, XH, 80, 100, 120, 140, 160, or XXH.

The Lonergan valve will also be embossed with a body material code. This can be represented as ASTM A126 Cast Iron, B62 Bronze, A105 Carbon Steel, ASTM A182, Grade F11, Grade F316 / F316L, Grade F22, Alloy 20, or Monel. The standard spring material is Chrome Vanadium

Safety relief valves, SRV, and pressure relief valves PRV, are manufactured in conformance to Section VIII of the ASME Boiler and Pressure Vessel Code for air, steam, and liquid service. Capacities certified by the National Board of Boiler and Pressure Vessel Inspectors. NACE Code valve certification included.

Please include Size and Model Number, or: Size, Valve Type, Body and Trim material, Pressure Class, end connections, and any special code requirements. Include set pressure, service media, and temperature, and required capacity, if any.

Lonergan Valve replacement parts are available for virtually every component of a valve assembly. Valve body, valve bonnet, replacement gasket kit, spring, nozzles, guides, discs, and spring steps, if identified by model number and size are normally stocked.

The APCO Clean Water Air Release Valves (ARV) function to release air pockets that collect at each high point of a pressured pipeline, and are essential for pipeline efficiency and water hammer protection. Air Release Valves are available in a wide variety of orifice sizes and materials of construction to meet a wide range of applications.

While it is impossible to totally prevent accumulation of air (or gases) within the piping system, the volume can be greatly minimized by installing APCO Air Release Valves on pipeline high points.

As the name implies, factory preset switches, regulators, and check valves have been preset and tested in the factory before distribution. This can facilitate your needed flow rates, lower installation time, or be adjusted after assembly.