consolidated 1811 safety valve supplier

A variety of pressure/temperature classes, orifice sizes and inlet/outlet combinations provide a flexible selection of safety valves to meet industrial needs at the lowest cost.

Low spindle bearing point and concentric spindle loading virtually eliminate the natural tendency for the disc to assume a horizontal position during the opening and closing cycle of the valve.

The mechanical flexibility of the Thermodisc allows the system pressure to assist in sealing the contact surface between the valve seat and Thermodisc.

Dual ring adjustments allow fine tuning of the safety valve performance characteristics needed to meet the steam system conditions that vary at each installation. A sharp, clean opening assures long valve seat life and reduced maintenance costs. Consistent opening and closing pressures contribute to efficient steam system operation.

Over the years we have refined our products so that our customers only have top quality options. Our service offerings are custom-fit to our customer’s individual needs. Our technicians and engineers are some of the most experienced and educated industrial experts available. We never compromise on safety and your satisfaction is our only goal.

A variety of pressure/temperature classes, orifice sizes and inlet/outlet combinations provide a flexible selection of safety valves to meet industrial needs at the lowest cost

Low spindle bearing point and concentric spindle loading virtually eliminate the natural tendency for the disc to assume a horizontal position during the opening and closing cycle of the valve

The mechanical flexibility of the Thermodisc allows the system pressure to assist in sealing the contact surface between the valve seat and Thermodisc

Dual ring adjustments allow fine tuning of the safety valve performance characteristics needed to meet the steam system conditions that vary at each installation

Chalmers & Kubeck –provides prompt delivery from one of the largest pressure relief valve inventories available anywhere. We have in excess of $10 Million in new Baker Hughes Consolidated * pressure and safety relief valves and OEM replacement parts in our C&K family of companies plus an additional $50 Million available from our Green Tag network associates. Strategically located,our knowledgeable, factory trained technicians, are available 24/7 to provide prompt, factory authorized repair service in both our shops or at the customer’s plant site. Territorial restrictions apply.

The Consolidated Series 3500 Electromatic Ball Valve (EBV) is designed to provide automatic or manual overpressure protection for steam boilers, and can also be used to assist start-up and shut-down…

ASME Section I and VIII approved, the Consolidated Type 2700 steam safety valve is configured to meet the specific requirements of the co-generation and waste-to-energy segments.

The Consolidated Type 1811 is a cost effective, high capacity flanged steel safety valve that offers seat tightness and high performance making it a solution well-suited for steam service applications.

Suitable for steam and other compressible fluid applications, the Consolidated Type 1541 and 1543 safety valves are ASME Section I and VIII approved. They are most commonly used in pharmaceutical,…

The Consolidated Type 1511 safety valves are designed for low pressure steam heating boilers, steam generators and air applications. This valve is ASME Section I and VIII approved.

The Type 3900 modular pilot-operated safety relief valve (MPV) features a separate, non-flowing pilot sub-assembly design making it well-suitable for use with both compressible and incompressible fluids. Optional pilot valve…

The Consolidated Type 1982 conventional process safety relief valve provides seat tightness and blowdown performance for vapor, liquid and steam applications. It is well-suited for applications requiring high relief capacity…

The Consolidated 19000 Series valve provides quality performance in seat tightness, capacity, and blowdown on most media. It surpasses ASME code requirements and is CE compliant to European PED specifications…

The first valve of its size capable of handling liquid and gas interchangeably without adjustments while remaining stable, the Type 1900 safety relief valve offers an innovative solution for multi-phase…

Consolidated Maxiflow high pressure safety valves are premium products that are installed on many power generating stations worldwide to help protect boilers from overpressure conditions. With a proven design, the…

Relief valves are often the last point of protection against dangerous events, so they must be dependable and ready to operate under high pressure situations. With Consolidated’s 140+ years of dedicated Pressure Relief Valve (PRV) engineering and manufacturing expertise under their belt, they know pressure relief valves and offer a wide range of safety relief valve and safety valve styles, sizes, options and configurations for all kinds of applications, environments and media.

Consolidated works closely with customers and regulatory organizations to configure, engineer and manufacture safety valves that can help maintain safer operating conditions in a full range of environments, to name a few:

Consolidated* 1811 Series Safety Valve Overview The Consolidated Type 1811 safety valve from GE is a cost-effective, high- capacity, flanged steel safety valve designed for steam service. Features and Benefits • variety of pressure/temperature classes, orifice sizes and inlet/ A outlet combinations provide a flexible selection of safety valves to meet industrial needs at the lowest cost. • ow spindle bearing point and concentric spindle loading L virtually eliminate the natural tendency for the disc to assume a horizontal position during the opening and closing cycle of the valve. • he mechanical flexibility of the Thermodisc* allows the system T pressure to assist in sealing the contact surface between the valve seat and Thermodisc.. • eal welding the seat bushing into the base assures no leakage of S steam past the threaded area of the seat bushing. • ual ring adjustments allow fine tuning of the safety valve D performance characteristics needed to meet the steam system conditions that vary at each installation. A sharp, clean opening assures long valve seat life and reduced maintenance costs . Consistent opening and closing pressures contribute to efficient steam system operation. Because the 1811 valve is not totally enclosed, upon actuation the system media will escape from the following locations: 1. The valve outlet that is the main discharge area. 2. The open yoke, which will also allow a small amount of steam to exhaust vertically. 3. The drain hole at the base of the valve. fact sheet

Safety valves play an important role in keeping people and equipment safe. Building on the long legacy of the Consolidated Safety Valves, we work closely with customers and regulatory organizations to configure, engineer, and manufacture safety valves that can help maintain safer operating conditions in a full range of environments.

Our safety valves comply with the ASME Section I code for boiler applications. They are built with many features that meet ASME requirements for steam-compressible fluids. Baker Hughes General Electric’s Consolidated safety valves are known for exceptional quality, performance and dependability. It is important they are reliable even the in most demanding real-world applications. With a range of styles, models, options and configurations, our safety valves work in many different applications.

The Consolidated 1511 series safety valve design provides reduced maintenance cost with its simplicity. Features: Open Spring design and simplicity allows ease of disassembly and assembly. The Consolidated 1511 series safety valves are designed with cast iron body and brass trim with inlet pressure ratings from ASME 125 class thru ASME 250 class. The Consolidated... Read More

Two-adjusting-ring design of the Consolidated Type 1541 and 1543 safety valves allows for sharp opening action and full lift at three percent overpressure. The self-aligning spring washers help increase repeatability and the valve’s life span. Features: Suitable for steam and other compressible fluid applications. the Consolidated Type 1541 and 1543 safety valves are ASME Section I and VIII approved. They... Read More

The Consolidated 1700 series Maxiflow safety valves are field-proven and are designed to provide optimum boiler overpressure protection. Increases plant efficiency by reducing steam losses via improved seat tightness and rapid opening to full lift with rapid closing as vessel pressure is reduced. Features: • Side rod construction provides extreme temperature compensation for thermal expansion of... Read More

The Consolidated 1811 series safety valves are designed to be cost-effective and high capacity. Features: Optimized seat design for improved seat tightness and higher capacity.Applications: The Consolidated 1811 series safety valves are designed with inlet pressure ratings from ASME 300 class thru ASME 600 class. The design is approved for use by the US. Coast... Read More

The type 1900/P safety valve is designed to meet Economizer and Organic fluid applications. Specifics: Inlet Sizes: 1″ through 8″Inlet Ratings: ASME Class 150 through 2500Outlet Sizes: 2″ through 10″Outlet Ratings: ASME Class 150 and 300Orifice Sizes: D through TSet Pressure Range: 5 to 6000 psig (0,34 to 414 barg)Temperature Range: -20°F to 850°F (-29°C... Read More

The Consolidated Type 2700 safety valve thermodisc seat design provides seat tightness and the thermodisc design increases the amount of repeatable pops. Features: Thermodisc thin flexible design for repeatable seat tightness. Applications: The Consolidated 2700 series safety valves are designed to meet the requirements of the cogeneration and waste-to-energy markets. Inlet pressure ratings from ASME... Read More