danfoss safety valve manufacturer

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

Danfoss proportional valves, motorized control valves, balancing valves, ball valves, thermostatic valves, solenoid valves, and expansion valves—among others.

The Danfoss SFVL safety valves are back-pressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants. These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specified in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certified by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol.

DSVL valves are designed specifically for use with double safety valve systems. When used in such applications, only one safety valve can be shut off or isolated at any one time. Complete shut off of one safety valve or the other can be obtained by front seating or back seating of the valve spindle. The valves are designed to give favorable fl ow characteristics and are easy to dismantle for servicing. The valve cone is designed to ensure tight seal.

Safety valves Danfoss is of Danish origin. From the Danfoss brand, manufacturing equipment such as safety valves, solenoid valves, pressure relief valves...

Safety valve company Danfoss is a Danish valve company, Danfoss was founded in 1933, initially just a small company, until now Danfoss has grown strongly into a leading organization in the world in the work. manufactures and supplies industrial valve products on the market.

The Danfoss safety valve company operates extensively in markets around the world. With an open field of development, Danfoss products have been developed and supplied to more than 100 countries on all continents.

Danfoss also provides technologies for a number of industries such as power solutions, climate solutions, sensor solutions, compressed air solutions, fire safety.

Danfoss products are very diverse, because Danfoss" fields of activities are very diverse, popular products such as valves, faucets of all kinds, compressors, pipe equipment, accessories, engine equipment, machines pumps, heat exchangers, cylinders, pumps… In general, Danfoss offers a wide range of products to customers.

Currently, Danfoss has been popular in Vietnam market quite a lot, products such as solenoid valves, safety valves are probably the most used products.

Safety valve BSV 8 is a safety valve product line manufactured from cast iron body, stainless steel head, BSV 8 product is a product with a typical input size of ¾", typical output size is first".

Danfoss SFA 10 safety valve is a safety valve product line made from stainless steel material line, very good quality, stainless steel material has advantages to mention such as anti-corrosion, anti-rust.

This is a 10H safety valve product line that is set up with a switch valve device to install two safety valve products operating in the same system, using two 10H safety valve products.

Safety valve products SFA 15 have very good corrosion resistance, besides, this safety valve product line made from micro-stainless steel material is also resistant to dirt and deposits, so this type of safety valve This safety is capable of working in applications with high requirements for hygiene and safety. The most typical are applications in food production.

The Danfoss SFV 20 safety valve is a threaded product line, a direct acting safety valve product, which can be used for a variety of water and steam applications.

We bring forth for our clients a wide range of Safety Ammonia Valve, which is right angled and loaded with spring. Safety Ammonia Valve are available in screwed type. The valve is made of high grade material and built with great precision and normally set at 250 pounds and 300 pounds per square inch pressure.

These valves are manufactured using high grade raw material, sourced from some of the most reliable vendors of the industry. Available in various sizes , these products can be availed from us as per the clients" specific requirements. Beside this, we provide this product to our customers at pocket friendly prices.

A comprehensive supplier of power and motion control components and systems, Vickers became part of Eaton in 1999. One of the most experienced and respected names in hydraulics, Vickers produces a wide range of vane & piston pumps, valves, electro-hydraulic controls, cylinders, and filtration products. These products are found in industrial, mobile, aerospace, marine, and defense applications worldwide. Vickers also pioneered the industry’s first fluid analysis service, a tradition carried on by Eaton Fluid Analysis Laboratory.