festo ms6 safety valve free sample

In the normal position (completely exhausted product), the pilot valves V1 and V2 are not actuated. If both pilot valves are actuated, the product switches first to the switching position 1 and then, when the switch-through pressure is reached, automatically into switching position 2 è Fig.3. Festo — MS6-SV-...-D-10V24 — 2019-05b...

Soft-start/quick exhaust valve, electrically actu- ated. Tab. 4 Circuit symbol for the function Switching behaviour Switching behaviour of the product"s internal valves. The normally exhausted position is sensed by the proximity sensors. Switching logic è Tab. 3 Switching logic. Festo — MS6-SV-...-D-10V24 — 2019-05b...

The flow rate and thus the pressure rise can be adjusted by turning the flow control screw. When the output pressure p2 reaches about 50 % of the operating pressure p1, the maximum flow rate perform- ance is enabled. Festo — MS6-SV-...-D-10V24 — 2019-05b...

Fig.3. è Diagnostics at each resetting to the normal position Switch off voltage to pilot valves V1 and V1 = 0; V2 = 0 Record edge change at proximity sensors S1 = 0  1; S2 = 0  1 è è S1 and S2. Festo — MS6-SV-...-D-10V24 — 2019-05b...

EN ISO 13849-2. value The PFH value depends on the model of the product and the annual actuation rate (n value MS6-SV-…-D 1 PFHd [10 2 Actuation rate (nop) [10 Fig. 5 PFHd value MS6-SV-…-D Festo — MS6-SV-...-D-10V24 — 2019-05b...

3 in the [l/min]  6000 (at p1 = 6 bar) ³ event of a critical fault Switch-through point Approx. 50% of p1 Filling flow Adjustable by flow control Minimum pause time after  1 ³ exhaust Tab. 10 Technical data, pneumatic Festo — MS6-SV-...-D-10V24 — 2019-05b...

Copyright: Festo SE & Co. KG Ruiter Straße 82 73734 Esslingen Germany Reproduction, distribution or sale of this document or communic- Phone: ation of its contents to others without express authorization is +49 711 347-0 prohibited. Offenders will be liable for damages. All rights...

Festo introduces the MS series of filtration products – filters that lower the risk of particle contamination when compressed air comes into direct contact with food or packaging in the food zone. The MS series meets or exceeds the highest industry standards for clean air. Always in stock with guaranteed fast shipping, MS filters arrive assembled with safety and total productive maintenance features typically found as custom add-ons. The units install easily and are priced competitively.

The MS series is designed for food and packaging-in-food-zone applications in the dairy, baking, produce, processed foods, pet foods, craft beer, cold food processing, and beverage industries. Furthermore, this versatile series is suitable for a wide range of industries outside of food and beverage where clean compressed air enhances the longevity and efficient operation of pneumatic cylinders and processes. The three different models in the series – MS4, MS6, and MS9 – not only conform to FDA and Food Safety Modernization Act guidelines for clean air, but they also meet or exceed the top national and international benchmarks, including:

As core Festo products, the popular MS4 and MS6 filtration units are available worldwide and normally ready for shipment within 24 hours. OEMs and end users also have the opportunity to customize this series for unique applications and are assured of quick assembly and product shipment.

As an example of easy ordering, the MS6 filtration system, the most commonly used unit for 2,500 l/min 0.01µm filtration application, has only two ordering numbers, one for left-to-right air flow and the other for right-to-left. Other variations of the MS6 for odor and moisture removal in sensitive applications are equally easy to purchase.

In addition to the three stage filters, MS air preparation units come standard with a lockout/tagout feature for operational safety. An exhaust valve, another standard feature, safely evacuates air from the system when filters are changed. Once the pressure point is set, a lockable filter regulator prevents tampering. Visual-cue red/green gauges support total productive maintenance initiatives by indicating to personnel that the unit has the correct/incorrect pressure range and whether filters require replacement. Filter drains are manual, ensuring that condensation droplets do not fall onto the facility’s floor and pose a risk of contamination. A corrosion resistant housing supports extended service life. The MS series installs easily and is compatible with a wide range of fittings from NPT 2 all the way down to G 1/8.

For more information on the MS series, write to food.processing.nam@festo.com. Visit www.festo.com/us for the full range of Festo automation solutions.

Those who power their machines and automate with air are similarly affected by the new machine safety regulations, so providers such as Festo offer safety units for decelerating and holding pneumatic drives in emergency situations.

Where the safety of entire processes has to be ensured, when an emergency stop occurs, Festo’s MS6-SV soft-start and exhaust valve vents the system in critical safety areas. Exhaust performance amounts to a quick 6,000 litres per minute, which is 1.5 times the pressurisation performance. The valve can be connected, for example, to a safety cover at an assembly station. If an employee opens the cover, the system is exhausted.

Photo caption: Festo’s soft start/quick exhaust valve provides reliable and efficient exhausting of systems during emergency shutdowns in safety-critical areas.