fire safety valve oil pricelist

• Fusible Fire Safety Valves are designed to reduce fire damage by shutting off the flow of oil from the oil tank in the event of a fire. These valves conform to UL/ULC 842 and are listed in the US and Canada. They are required by code in residential oil heating installations in conformance with NFPA 31.

• All valves are embossed with the direction of oil flow and include unique part number identification ring or each valve. The seal stem uses a double seal washer/ o-ring system with high grade Viton® equivalent materials suitable for No. 2 fuel oil, Kerosene and up to 20% Biodiesel blend.

The Remote Acting Oil Fire Valve is designed to safeguard against the risk of fuel being fed into the fire. When fitted to an oil supply line, fire safety valves can help to prevent total destruction by fire, which is why British Standard BS5410 states that oil supply lines should be protected by these valves. When the capillary sensors are exposed to excessive heat the fire valve closes tightly, preventing the main storage tank from fuelling the fire. Once they close as a precaution, theseremote acting oil fire valves will not reopen unless it is manually reset.Cut off temperature of 66°C or 90°C (depending on model)

In the event of a fire valve is designed to shut down to stop further flow of oil. May be required by many state and local codes – but always a good idea even if your local/state codes don’t require.

NuEra Heat is the largest stocking distributor of EnergyLogic and BlackGold equipment and parts in the Pacific Northwest and Alaska. We’re experts in waste oil or used oil heating equipment with 30+ years of experience. We generally have many EnergyLogic heaters, furnaces, and boilers in stock and ready for same day shipping. Parts are shipped the “same day” they are ordered if the order is placed before 3pm Pacific Time. Serving the Alaska market for over 30 years we also serve Washington, Oregon, Idaho, Montana, Wyoming, Utah and almost anywhere UPS, USPS or FedEx will deliver. We provide service in the Portland, Or metro area – the Seattle, WA metro area, Anchorage, Fairbanks and most places in Alaska or the Pacific Northwest. We are happy to help with any questions about the products and we stand behind what we sell with service, support and friendly advice. Give us a call – we’re here to help: 1-800-347-9575.

EnergyLogic is a leading manufacturer of used oil furnaces and boilers. With the highest number of standard features and most comprehensive warranty on the market, EnergyLogic used oil furnaces and boilers can eliminate the cradle-to-grave liability, reduce heating costs and generally have a payback period of a single heating season and the lowest cost of ownership. All EnergyLogic waste oil heating systems are UL-listed and meet or exceed all EPA regulations. Tens of thousands of our energy-saving solutions are currently in use from small garages to the largest corporations in the world.

Shop at Unimech Flow for high-quality valves made of cast iron, ductile iron, cast steel, and forged steel for general industry and oil & gas. We sell a wide range of material choices suitable for all kinds of mediums in different working conditions. Buy industrial oil and gas valves from the company leading the industry and supplying every customer with competitive pricing. Our high-quality valves are your perfect option no matter what area of industries you work in! Browse our many variants and select the appropriate one for your needs. We offer international shipping, so we can get these industrial oil and gas valves to you no matter where you are.

ARITA Safety Valve Thread End Safety Valve by Arita, is used to protect against excessive pressure in system working from 5 to 150 PSI. Set pressure can be set upon order, but can also be set by user by removing cover and adjust the screw on top of the valve.

Butterfly Valve Universal Wafer The ARITA Series body design neck with octagon shape offers aesthetic appearance, strength and compatible flange connection to international standards. Its top flange is designed to ISO5211 for the direct mounting of gear operator or actuators which eliminate the cost of mounting bracket. The one piece design body provides outstanding protection against particle entrapment and bacterial growth. ARITA offers various materials for the valves seat and disc to meet...

1 PC Body Ball Valve WOG 1000PSI Thread End 1 piece uni-body ball valve by Arita is designed for process flow control in general service up to 1000 PSI and working temperature at the range of -20°F to 410°F. Floating ball design ensures tight closure when valve is at closed position as upstream pressure pushed ball towards valve seat to provide no leakage internally. 1 piece body design has a reduced port, also known as standard port, which the reduce flow size down by one size.

2 PC Body Ball Valve WOG 1000PSI Thread End 2 piece split-body ball valve by Arita is designed for process flow control in general service up to 1000 PSI and working temperature at the range of -20°F to 410°F. 2 pc body allows service capability of change of valve seat for longer usage life span. Floating ball design ensures tight closure when valve is at closed position as upstream pressure pushed ball towards valve seat to provide no leakage internally. Full port bore allows unobstructed th...

Arita BV Mini Series features ball valve of 1 Piece Body design is designed for process flow control in general service up to 1000 PSI and working temperature up to 400°F. 1 piece body design has solid, cast body with zero leakage points with standard port providing smooth flow when fully open. Stainless steel material has high pressure tolerance, temperature limits and corrosion resistance suitable for water, oil and gas applications.

Arita BV Mini Series features ball valve of 1 Piece Body design is designed for process flow control in general service up to 1000 PSI and working temperature up to 400°F. 1 piece body design has solid, cast body with zero leakage points with standard port providing smooth flow when fully open. Stainless steel material has high pressure tolerance, temperature limits and corrosion resistance suitable for water, oil and gas applications.

Spring Return "Deadman" Handle 2 PC Body Ball Valve WOG 1500PSI Thread End Arita BVS Series features "Deadman" handle ball valve of 2 Piece Body design is designed for process flow control in general service up to 1500 PSI and working temperature up to 400°F. Operation of the valve is through a large handle with spring return to closed position. 2 piece body design has solid, cast body with less leakage points with full port providing unobstructed flow when fully open. Stainless steel materia...

Arita BV Mini Series features ball valve of 1 Piece Body design is designed for process flow control in general service up to 1000 PSI and working temperature up to 400°F. 1 piece body design has solid, cast body with zero leakage points with standard port providing smooth flow when fully open. Stainless steel material has high pressure tolerance, temperature limits and corrosion resistance suitable for water, oil and gas applications.

The Model 119-O fire safety oil shut-off valve combines an API rated oil shutoff valve with a fusible link making a complete 3rd party approved fire safety valve assembly for fuel oil applications.

Each valve is shipped with a red protective safety link that must be removed prior to putting the valve into operation. A hand lever or wheel is provided to manually close the valve regardless of the action of the spring pack. Once put into operation, the valve is held open against the torque of the spring pack by the fusible link. If subjected to temperatures greater than 165° F the fusible link melts and the valve slams closed.

The Model 119-O may be used in any oil fueling system to ensure positive oil shutoff in the event of a fire. This includes boiler rooms, diesel generator rooms, tank farms, refineries, and chemical plants. It must be installed in a horizontal run of pipe with the spring pack pointed upward.

Assured Automation"s FM Fire-Safe Thermal and Electro-Thermal ball valve and butterfly valve assemblies are designed to shut off automatically and control hazardous conditions. The heat actuated, U.L. listed thermal links automatically shut off or open the valve at predetermined temperatures. Ball and Butterfly assemblies are available with manual levers or gear operator which will allow the valve to operate manually at any time without affecting the fusible links or removing the spring loaded canister.

Fire Safety Valves are critical safety devices designed to isolate flammable liquids and gases from extreme heat and open flames. When exposed to high temperatures, the fire safety valve closes to prevent flammable liquids from coming into contact with heat sources, whether in a fire or an overheated system. These hot shutoff valves are usually available in two configurations: Fire Ball Valves and butterfly valves.

The fire safety ball valve is designed to American Petroleum Institute (API) Standard 607. One of the characteristics of the fire safety ball valve is that it operates under operating conditions similar to ordinary valves. In case of fire, the resilient seat will burn off, but a secondary metal will come into play and allow the ball to seal against it. The valve also includes graphite body seals and packing to prevent external leakage.

A fire safety valve with a fusible connector includes a spring assembly with a clock and a trigger attached to the fusible connector. The connecting Rod keeps the valve open during normal operation by maintaining tension on the spring. When exposed to heat above a certain temperature, the connecting rod disconnects, releasing the Spring and closing the valve.

Fire Safety Valves are essential for all operations from building safety systems to process equipment. THINKTANK provides those fire safety valves to the following applications which have excellent performance. Main Generator and backup generator