flood stop safety valve manufacturer

Components: Motorized Full-Port Ball Valve (1 inch NPT pipe threaded), Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (2).

Components: Motorized Full-Port Ball Valve (1 1/4 inch NPT pipe threaded), Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (2).

Components: Motorized Full-Port Ball Valve (1 1/2 inch NPT pipe threaded), Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (2).

If you would like the FloodStop Controller to be located further away from the FloodStop valve than the kit provides, our new 9 foot long white Controller to Valve Extension Wire(s) will fit the bill (one wire needed per valve).

(Currently Sold Out). Extra Wireless Water Sensor Kit. This unit is used with the FloodStop wireless whole house units, and includes the module, sensor pad and wall adaptor.

Wifi module connects to any FloodStop controller, and will send SMS text messages and/or emails whenever the FloodStop triggers. No subscription. Purchase price covers all cost. Can have 2 phone numbers for text and 5 different email addresses.

Components: Motorized Ball Valve (1/4 inch Compression Fitting), Control Unit, Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (1).

The FloodStop for water heaters automatically shuts off the water supply to the water heater and sounds an alarm, leaving all other household fixtures and appliances operational.

Components: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), Power Control Unit with Batteries (4 AA) or use AC Power Adapter with or without battery backup. Water/Leak Sensor (1.25� X 7.5�),

Components: Motorized Ball Valve (One Valve, 3/8 inch Compression Fitting), V4 Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (1).

Components: Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded), Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (2).

The FloodStop �Compression� model for water heaters automatically shuts off the water supply to the water heater and sounds an alarm, leaving all other household fixtures and appliances operational.

Components: Motorized �Full-Port� Ball Valve (3/4 inch with �Compression Fitting� for copper pipe applications)Control Unit with Battery Backup (4 AA), Water/Leak Sensor (1.25� X 7.5�) and AC Power Adaptor

Components: Motorized Ball Valves , (Two Valves, 3/8 inch Compression Fitting)Control Unit (with Battery Backup 4 X C Size), Water/Leak Sensor (1.25� X 7.5�), AC Power Adaptor (or use 4 X C Batteries as Primary Power Source), Output Contact Wires (2).

Quality Plumbing Supply is a proud distributor of Floodstop products. This Floodstop FS150NPT Water Heater Floodstop With 1-1/2" Valve is a direct replacement manufactured by OnSite Pro. Order this Floodstop FS150NPT Water Heater Floodstop With 1-1/2" Valve today. Most orders usually ship the same day and we offer free shipping for orders over $99!

Quality Plumbing Supply is a proud distributor of Floodstop products. This Floodstop FS12NPT Multi-Purpose Floodstop With 1/2" Valve is a direct replacement manufactured by OnSite Pro. Order this Floodstop FS12NPT Multi-Purpose Floodstop With 1/2" Valve today. Most orders usually ship the same day and we offer free shipping for orders over $99!

With FloodStop automatic water shut-off products you can stop flood damage before it really starts. In the event of a leak at any of your common appliances, the FloodStop valve will close shutting off the water supply to prevent any major damage whether you are home or away.

Prevent flooding from failed washing machines and hoses with this washing machine valve shutoff. This FloodStop unit can even hook up to an auto dialer or your home security system to alert you that it has detected a leak and activated!

Washing machines are one of the top causes of water damage to residential properties, especially those on upper floors. Washing machines can fail in many ways including flooding from overfills as a result of failed switches, pumps, clamps, valves or blocked drains. You are also at risk from the water supply hoses that often crack or burst, as well as the connection fittings that can leak. If you are at work or on vacation, the extensive unabated flooding can be catastrophic, going on undetected for hours or days, causing tens to hundreds of thousands of dollars in damage.

This newly upgraded model Floodstop Washing Machine Valve Shutoff System (FS3/4H-90 v4) offers a Lead free valve to comply with the Safe Drinking Water Act. Using a local hardwired water sensor, the valve automatically shuts off the water supply to the Washing Machine and sounds an alarm if water is detected on the floor below. Only the offending appliance is affected by the water shutoff feature, so all other household appliances and water outlets will remain operational. The controller is powered by an AC adapter with transformer and batteries, but it will beep to alert you that the batteries are getting low or are missing. It has a single (NO) normally open output contact for connection to an auto dialer, smart home / home automation system or your existing intrusion alarm system for monitoring. Can be used alone or for added protection for faster localized response with whole-house water shut off systems.

The two FloodStop valves are screwed onto the cold and hot water hose bibs and the hardwired water leak sensor is placed on the floor below the system just behind or next to the washing machine. When water is detected on the floor by the moisture sensor, the FloodStop valves both close simultaneously and the controller sounds an alarm. The valves remain in the closed position until you reset the system.

Connected and IoT-enabled products are here to stay. And the SentryPlus Alert™ technology inour new flood protection system delivers the benefits you would expect from such modernizations.

Advanced protection of an RPZ backflow preventer comes with the possibility of discharge through the relief valve. While this is part of the backflow preventer doing its job, it’s a hazard that can be detected and mitigated before it does any damage to your facility. The Watts flood protection system with SentryPlus Alert™ detects potential flood conditions, shuts down the water supply*, and issues multi-channel alerts so you can take action, all before the water starts rising. With you from detection to protection, our latest system lets you be there… even when you’re not.

The MAGFLO™ model ETA-4 automatic air vents used in plumbing, HVAC, and fire fighting system to continually remove air from the system without the need for manual bleeding. The atmosphere within a piping system can cause excessive noise due to trapped air, reduce the accuracy of control valves and the performance of heating and cooling equipment. One of the essential functions of the automatic air vent is to release air as the system is being filled with water and then automatically isolating and preventing water loss from the system

The Model 115-1FP Anti-Flood System is designed to shut off the flow of water when the probe detects a presence of water that exceeds a predetermined time.

The Model 115-1FP uses the OCV Anti-Flood Relay Controller (P/N 249994), which supplies power to the Model 140 Water Detection Probe. When combined, these two devices have the ability to detect water in a drain line, floor drain, or any type of pit. When a constant presence of water is detected that exceeds the user specified time limit, a set of internal contacts will close in the controller. The OCV Anti-Flood Relay Controller will then send a signal to energize the solenoid on the OCV Model 115-1FP Anti-Flood Valve. The OCV Model 115-1FP Anti-Flood Valve is typically located in the supply line to the system being protected. This control valve is a normally open valve and when the solenoid is energized, it causes the main valve to close and stop the flow of water through the valve. The system can then be reset by manually resetting the controller and then resetting the control valve.