hawkins cooker safety valve free sample

Such a valve assembly is known from German laying-open print DOS No. 2,606,676. The pressure relief means thereof consists of a check valve which also serves as a safety valve. It has a valve housing of a resilient material which is fitted into a hole in the cover in the vicinity of the cooking valve aperture. The closure body is designed as a shaft-shaped valve body, transverses the valve opening and supports two spaced valve disks inside the cover as well as a dome-shaped head outside the cover. The head abuts against the valve opening in the pressureless state. As the pressure builds up in the pressure-cooker, however, the valve body is lifted and the upper valve disk closes off the valve opening internally so that the pressure in the cooker can build up. When the pressure becomes excessive, the upper valve disk can move outwardly through the valve opening of the valve housing. This allows steam to escape through the valve opening. The second valve disk preventing the valve body from being blown off the cooker although it does not obstruct the escape of steam. The cooking valve usually comprises a spring-loaded valve and a displaceable pressure indicator for the cooker which is located therein and is also spring-loaded. The springs press against the interior of a cap which is adapted to be screwed on to the valve housing. In the known valve assembly, the cap of the cooking valve has an asymmetrical design on the underside facing towards the cooker cover. It features a guide bevel at this location which reduces its clearance height. In the normal cooking position, the area with the maximum inner clearance height overlaps or overlies the check valve. When the cap is screwed off, the area with a minimum clearance height comes to lie above the check valve over which it can move without obstruction when the head of the check valve abuts against the outer side of the valve seat in the completely pressureless state. If the check valve has closed due to the internal build-up of pressure in the cooker, ie if the upper valve disk abuts against the valve seat, the guide bevel presses the valve body of the check valve downwardly and steam can escape through the check valve. The pressure in the cooker is relieved, whilst the person using the cooker is warned simultaneously by the sound of the escaping steam not to unscrew the cap any farther. If the valve body has been raised only slightly owing to a slight superpressure in the cooker, eg at the onset of pressure build-up, an additional stop which projects into the clearance height prevents the cap from being rotated any farther.

The known valve assembly is expensive to manufacture, since it requires a valve housing and a valve body for the pressure relief means. These parts are expensive to manufacture and to assemble. The cap of the cooking valve is also expensive to produce owing to its asymmetrical shape, and the dimensions of the guide bevel as well as the region of reduced clearance height must be kept within a narrow tolerance range: the valve body must be pressed downwardly to open the valve on the one hand, although on the othe hand this must not be so far that the valve head closes the opening externally. Another drawback is that when the cap is rotated into the open position, the stop jams the head of the valve body and this cannot return to its original position, even when the cooker is not under pressure, until the cap has been turned back somewhat. When the check valve functions as a safety valve, the valve disk cannot automatically turn back any longer due to the valve opening. The cap cannot be screwed off over the projecting valve body either. This makes it impossible to gain access to the valve body and return it to the normal position. Yet another disadvantage is that the valve body of the check valve can only be cleaned thoroughly--quite essential for proper sealing--if it has been snapped out of the valve disk. Since this is complicated and troublesome, such cleaning is frequently postponed or forgotten completely.

A valve assembly comprising a pressure relief means disposed adjacent to the cooking valve is also known from German utility model No. 7,624,730. The pressure relief means is designed as a safety valve in the form of a check valve. The cap of the cooking valve has indents on the periphery thereof. Both valves are spatially associated with one another such that the valve body can be raised adjacent to such an indent only when the cap is in certain positions. The check valve can be closed and pressure built up in the cooker only in this position. When the valve body is in the raised position, ie when pressure has built up in the cooker, the valve body in turn locks the cap of the cooking valve which cannot be rotated. Hence, the vent opening cannot be opened by adjusting the cap. This known valve assembly, which therefore does not correspond to the preamble of the present invention, is expensive to manufacture due to the design of the check valve. It is also difficult to clean, since the steam is dissipated to one side through a cavity in the cooking valve beneath the cap when the safety valve responds to excessive pressure. These cavities are difficult to reach, even after the cap has been removed. Furthermore, the valve body cannot be turned back into its original position until after the safety valve has responded and the excess pressure has been vented off. Only then can the cap be removed from the cooking valve.

The object of the present invention is to provide a valve assembly according to the preamble of the claim which is economical to manufacture, easy to clean and simple to operate in all modes of operation.

The construction of the closure body as a seal disposed on the cap makes it possible to design the vent opening in the form of a simple hole in the cover without any valve housing. Such a hole can be produced during one and the same operation as the hole for the cooking valve. It is easy to clean. The arrangement of the associated seal in the cap gives rise to a constructional design which is simple and easy to clean. This construction of the pressure relief means is made possible by the recognition that the vent opening need only be open to relieve the pressure. An open valve is unnecessary prior to a pressure build-up, since the air being heated up can escape by way of the conventional sealing rings between the pressure-cooker and the cover until the sealing ring abuts sealingly against the cover and cooker wall due to the build-up of pressure. In the pressure relief means in accordance with the invention, the co-operation of the seal and the vent opening permits steam to escape even when the cap is moved minimally towards the venting position. The pressure in the cooker decreases immediately. Moreover, the co-action of the venting opening and the seal generates a warning sound which warns the cook not to opening the cooking valve while the cooker is still under pressure. If there is no seal in the cap, no pressure will build up in the cooker at all.

The seal can advantageously consist of a material which is so resilient that it sealingly closes the vent opening at normal cooking pressure and permits pressure to be vented should it become eccessive. The pressure relief means thus functions as a safety valve as well.

The annular seal advantageously has an internal diameter which is smaller than the external diameter of the cap section it surrounds. The annular seal is thus seated in the cap region in such a way that it can be neither twisted nor lost. Dirt cannot readily collect between the cap and the annular seal so that the seal does not have to be removed every time the cooker is cleaned.

FIG. 1 indicates the cover 1 of a pressure-cooker. A valve housing 2 is firmly riveted into place in the cover 1. It includes a valve seat 2a against which a valve body 3 is urged by a valve spring 4. This valve spring 4 presses against the inner side of a cap 5 overlying the entire valve assembly and designed as a cap or acorn nut. A pressure indicator 6 is displaceably mounted in the valve body 3. It is pre-biased by a pressure indicator spring 7 which presses against the valve body on the one hand and, on the other hand, against the inside of the cap 5. The cap 5 is adapted to be screwed on to the valve housing by means of a thread 8, thereby determining the tension of the valve and pressure indicator springs.

The cover 1 has a hole 10 in spaced relation from the valve axis and is located between the internal and external diameters of the annular seal. It serves as a vent opening and is closed by the annular seal 9 during cooking.

The afore-described valve assembly functions as follows during cooking: the cap 5 is screwed down to the stop with the inscription "cooking" adjacent to the arrow 12. The valve spring as well as the pressure indicator spring are both pre-biased in this position. The annular seal 9 closes the hole 10. Steam pressure can now build up in the cooker in the known manner once the warm air has escaped between the cooker and the cover as mentioned above. The cooking pressure is chosen by regulating the supply of heat in response to the position of the pressure indicator 6. At the conclusion of cooking, the cap 5 is turned half a turn to the "venting" position. This causes the annular seal to release the hole 10, the steam can escape and the pressure is relieved. The venting is continuous and dependent on the speed of rotation.

If the pressure indicator is not observed during cooking, i.e. if the supply of heat is not turned down at the proper time, thus causing the pressure in the cooker to become excessive, the steam can escape through the hole 10. This gives off a warning whistle and deforms the annular seal 9. Should the generated steam still be excessively high, the valve body 3 is lifted off its seat 2a.

If old tales of exploding pots have kept you from jumping on the pressure cooker bandwagon, it’s time to reconsider. These days, the best pressure cookers are not only versatile and easy to use, but they’re brimming with safety features — and they’re capable of making great meals faster and easier than ever.

Perfect for busy families or feeding guests without having to spend the whole night in the kitchen, pressure cookers are great for whipping up stews, soups and tough meat cuts as well as whole chickens, rice, beans and more. To determine which popular and highly rated models are best, we put 15 electric and stovetop cookers to the test, using each to make a no-stir risotto, unsoaked beans and a simple beef stew. Here’s what we found.

The creamiest risotto in five minutes? Perfectly cooked beans and oh-so-tender stew meat? Precision cooking, hands-free steam release and a sleek, intuitive display make this pressure cooker worth the price.

With a unique one-handed lid design, durable base and easy-to-grip handles, this stovetop cooker is simple to use and delivers great cooking results for under $100.

It cooks rice — and slow cooks. It can make yogurt — and cook sous vide. With 10 preset functions and app control, the Instant Pot Pro Plus promises to be the holy grail of small kitchen appliances, and delivers on a lot of its promise. First and foremost, though, it’s a great electric pressure cooker, with a simple interface, solid build and useful pressure-release functions that let us easily get great results on all of our test recipes.

The Pro Plus is built using three-ply stainless steel with silicone handles (making it easy to move the cooker to the stovetop or sink or to pour its contents into a bowl or container), and the 6-quart inner pot can be on the stovetop or in the oven for added convenience. An anti-spin feature keeps the pot from rattling around during the cooking process. It comes with a stainless steel steaming rack and extra sealing ring and the cooking pot, rack and lid are all dishwasher-safe. It’s also nice and compact at 13.2-inches long by 13-inches wide by 12.7-inches high and weighs about 20 pounds, so it doesn’t take up too much cabinet or counter space and isn’t a huge chore to lug around.

The Pro Plus only comes in 6-quart size, where some other Instant Pot models are also available in 3- and 8-quart options, which may be a detractor for those feeding large groups or households. It also is not compatible with the brand’s air fryer lids that some may find useful. The one-year limited warranty could be more generous and at $169.95, it’s certainly pricier than the already very capable Instant Pot Duo (see review below). But we think the Pro Plus’s app controls, simple interface, progress status bars and excellent cooking results give it the edge over the other Instant Pot models and make it the best choice overall among the electric pressure cookers we tested.

Instant Pot’s best-selling model comes with seven built-in functions (pressure cook, slow cook, rice cooker, yogurt maker, steamer, saute pan and food warmer), and also features 13 customizable programs. The digital and push-button display is large and easy to read and we appreciated that the lid can be detached for easier cleanup. The stainless steel inner pot can be tossed in the dishwasher and it’s simple to switch between low and high pressure, while a keep warm option and included steam rack offer added convenience.

The Pro Plus upgrade performed better on all three recipes, and has the added benefit of a more streamlined interface, auto steam release and progress indicator. But if you’re just testing out the pressure cooker waters, this is a great option for wading in.

With  sleek design and solid performance typical of Breville’s products, we gave the brushed stainless steel Fast Slow Pro high marks for performance and features, which should satisfy advanced pressure cooker aficionados and hands-on cooks.  The Breville gives you finer control over pressure (you can adjust in tiny 0.5 psi increments) than the other models we tested. Dual sensors at both the top and bottom of the machine offer even more control when it comes to pressure and temperature, and an auto warm function kicks into gear when it’s done cooking.

And we loved how simple the cooker was to operate. The bright and easy-to-read LCD display and dials allow you to quickly choose from 11 pressure cook settings (vegetables, rice, risotto, soup, stock, beans, poultry, meat, bone-in meat, chili and stew and dessert), from low to high, and you can customize settings as well. We appreciated that the display changes colors denoting whether it’s in pressurize, cook or steam release mode. And the auto altitude adjuster is great for those cooking at higher elevations, since a longer cook time is needed as atmospheric pressure drops the higher you get above sea level.

If you intend to use your electric pressure cooker often, love having the ability to really fine-tune your pressure levels, appreciate the convenience of hands-free steam release and aren’t too worried about a hefty price tag, we think the Breville Fast Slow Pro is a kitchen tool you’ll look forward to putting to work again and again.

If you prefer a simple, straightforward stovetop pressure cooker, the Kuhn Rikon Duromatic looks lovely on the stovetop and does an impressive job cooking food. We tested the 8.5-quart option (Kuhn Rikon offers the Duromatic in a wide range of sizes) and found the two-handle design easy to grab, the pressure indicator simple to read and, while the company doesn’t recommend cleaning the heavy stainless steel pot in the dishwasher, it was no big deal to hand wash it (and we know folks who have tossed their own Kuhn Rikons in the dishwasher for years with no damage).

The T-fal Clipso is a breeze to use. In our tests, the Clipso pressurized very quickly. As with all stovetop models, you bring up the heat to your desired setting, and once steam begins to release through the valve, it’s time to reduce the heat and set your timer. We quickly found the sweet spot and noted that the pot held its pressure nicely throughout the cooking time, with little need for turning the heat up or down.

Like the electric pressure cookers, all the stovetop models performed well in our recipe tests, although some earned more points for better consistency, texture and faster cook time. So while the Kuhn Rikon beat out the T-fal when it came to making beans, risotto and stew, for about $155 less, the T-fal still did an admirable job.

The model comes with a steam basket and tripod and is dishwasher safe when you remove the gasket and pressure valve. It comes with a 10-year warranty against defects or premature deterioration and, for other parts, a one-year warranty is included. And we appreciate the side handles on the pot that allow for easy maneuvering. But what sets the T-fal apart from other models is its unique lid. Designed for one-hand use, the lid clamps down on the pot with jaws that lock into place with the press of a button. Once you’re done cooking and the pressure is released (you can release it by twisting the steam release valve from the cooking icon to the steam icon), the lid opens by pressing the top of a large knob. As a safety feature, the lid will not open until all pressure is released.

The Clipso is only offered in a 6.3-quart capacity, which offers plenty of room to cook for a family of four, and is still compact for storage. For convenience and price, we believe this is a great pressure cooker for beginners and veterans alike.

By trapping steam inside a tightly sealed pot, pressure cookers raise the pressure under which your food cooks (typically to around twice atmospheric pressure), thus raising the boiling point of water and significantly speeding up cooking times.

Simple stovetop cookers use the heat source of your stove and need a bit of attention as you’ll need to adjust your burner to maintain proper pressure, while newer electric versions do the job automatically (and often include functions ranging from air fryer to slow cooker to yogurt maker).

While folk wisdom holds that pressure cookers are dangerous, accidents are in reality rare (and many of those that have been documented have been the result of poor maintenance or misuse). All the pressure cookers we tested come with multiple safety features and lids that lock into place, and are designed so that all pressure must be released before the lid can be removed (with some release techniques, steam is released rather loudly and aggressively and definitely startled us a few times). Some models spit out a bit of moisture as steam condenses, but many of the electric versions include condensation collectors that catch any water before it drips onto your counter.

So, electric or stovetop? Both netted similar cooking results, so it really does come down to personal preference: Do you like your cooking to be hands-on or hands-off? If you want a lot of options (Slow cook! Air fry! Sous vide!) and want to simply add your ingredients and let the machine do the heavy lifting, an electric version is for you. They generally take up more counter space, but if you use your cooker several times a week, you won’t mind and may even save space if it allows you to get rid of your rice cooker, air fryer and crock pot.

We found the stovetop pressure cookers to be simple to use and discovered they come to pressure faster than their electric counterparts. Start on high heat until the desired pressure level is achieved, then simply lower the heat to keep the pressure constant for the duration of your cook time. Of course, you’ll need to keep an eye on your cooker most of the time to be sure the pressure is at the right level.

Our testing pool included 15 pressure cookers in all — nine electric and six stovetop — ranging in price from less than $50 to $330, and in 6- and 8-quart capacities. And while all the models performed well in our recipe tests, which included making unsoaked pinto beans, pea and mushroom risotto and a hearty beef stew, details including construction, interface, ease, cook time and versatility resulted in varied scores. All models were easy to clean, as most pots, inserts and parts are dishwasher safe, although many lids need to be hand-washed fairly rigorously to keep odors from hanging on. And while we didn’t record any particularly bad recipe results, some required more cooking time and some definitely netted better results.

Since many of the electric models are billed as multicookers, we did take versatility into account, noting how many settings, functions and features were available, but looked at these models as pressure cookers first and foremost. We did pay careful attention to ease of setup and use, noted what accessories were included and their usefulness in actual cooking, and looked at the overall quality of the user interface elements of each cooker. By and large, even the electric versions were relatively intuitive to use, but we made sure to note when we had to turn to the instruction manual (and when we needed technical translation!); for stovetop cookers we checked to make sure pressure settings were easy to read, steam valves simple to manipulate, and seals and other moving parts easy to manage.

In the course of our assessment, we paid careful attention to overall design and build quality, examining materials used, noting any unique features such as handle, inner pot and lid design, pressure release valves and gauges and safety enhancements. We checked to see how much storage and counter space the various models took up, and whether they were heavy or light and easy or difficult to handle. And while most of the inner pots and parts of the pressure cookers tested were deemed dishwasher-safe by the manufacturers, we noticed that lids were largely hand-wash only, so we checked to make sure how much elbow grease it took to remove food, and whether our efforts left behind any staining or remaining food odor.

If you love the Instant Pot Duo and also love using an air fryer, this may be just the electric pressure cooker option for you. We found it performed identically to the Duo when it came to pressure-cooking our three recipes, and the interface is also essentially the same as the Duo, though it has four more cooking functions than that model (all 11 include roast, slow cooker, pressure cooker, air fry, saute, sous vide, bake, broil, steam, warm and dehydrate).

However, it’s about twice as heavy as the Duo, and with the air fryer lid (it also comes with a regular lid), it requires a lot of vertical storage and counter space (though not as much as two separate appliances). Included are a broil/dehydrating tray, multi-level air fryer basket, air fryer basket base, protective pad, storage cover and rack. So, if you think an air fryer-pressure cooker combo would save room and you’d use it frequently, this model is certainly worth considering. Otherwise, the Duo will work just fine and the Pro Plus will perform even better.

There was a lot we liked about Cuisinart’s pressure cooker: It has a unique squarish shape, 12 pre-programmed settings, a large and easy-to-read LCD display, both dial and push-button controls and it comes with a handy trivet and stand. The nonstick cooking pot made cleaning a snap and we liked the way the lid locked into place with little effort by simply turning a knob. Cook times were a little longer than for the other machines we tested, but results were good so long as we compensated: we had to cook the beans five minutes longer than the recipe called for, but they turned out nicely with the added time. The risotto had a nice texture after we sauteed it for a few extra minutes to finish the rice and the stew was nice and tender. A big plus for this machine is the steam release button and preheat indicator that allow you to see your cooking progress. We didn’t like that the lid is attached at the back (most of its competitors are attached on the side or lift off completely), because it makes opening the machine a little scary, as any remaining steam is pointed right at your face. The controls were also a bit less intuitive than our winning models.

It takes practically no time to get the Farberware pressure cooker working once you take it from the box: Just a quick wash and a scan of the instruction manual and you’re off. It comes with nine presets (rice, meat, chicken, fish, vegetables, beans/lentils, browning/searing, soups/stews and slow cooking), a straightforward LED display, and includes a cooling stand and plastic measuring cup and spoon. User reviews give it high marks, but we found the risotto to be gummy, the beans to be inconsistent and the stew a bit overly cooked (the veggies were on the mushy side, for example). “I wouldn’t complain if I was served this at a school cafeteria, but would be mad if I got it at a restaurant,” one taster remarked. The machine is stainless steel, though it felt less sturdy than its competitors. We think it’s worth it to spend a little more money to get an Instant Pot Duo.

The Zavor LUX is a high-quality pressure cooker: It is simple to set up, with an intuitive digital LED display, including a super-handy preheating indicator, a lock icon, and screen that changes colors so you know when cooking has started; the LUX also has a custom setting that lets you program your favorite recipes. There are 10 cooking functions (pressure cook high and low, slow cook high and low, steam, saute, sous vide, simmer, yogurt, grains, eggs, dessert, keep warm and time delay) and it comes with a steamer basket and trivet. We liked that the pressure valve includes a clean option that pops the piece out for easy maintenance.

With a whopping 14 programmable cooking functions (pressure cook, steam and crisp, steam and bake, air fry, broil, bake/roast, dehydrate, sear/saute, steam, sous vide, slow cook, yogurt, keep warm and proof), Ninja’s take on the pressure cooker offers a whole lot of versatility. It comes not only with an 8-quart ceramic-coated pot, but also a 5-quart cook and crisp basket for air frying, a reversible rack to double your cooking capacity and more. We thought the “SmartLid Slider” was clever and easy to use: just slide a toggle to Pressure Cooker, Steam Fryer or Air Fryer to unlock different cooking modes and functions on the large, intuitive digital display.

The Foodi performed well on our recipe tests, but not as well as our winners. And while we found it easy to clean, its size was our biggest concern, especially for a device that is meant to replace multiple appliances. The priciest pressure cooker we tested, it was also the biggest. At 15.4-inches long by 14.2-inches wide by 14.25-inches high, it was too big to fit in any of our kitchen cabinets or under our standard-height countertop cabinets for that matter. It’s also really heavy at 25 pounds, making it a pain to haul out of storage if there’s no room for it in your kitchen. For us, the size and price kept it from the winner’s circle, but if you really need all of the functions it offers and have a lot of space, it might be worth a look.

For those looking for a step up from the original Instant Pot Duo, the Pro offers a few more bells and whistles that allow for more precision cooking. Rather than seven functions, the Pro features 10 (pressure cook, slow cook, rice/grain, saute, steam, yogurt, warm, sous vide, sterilizer and canning). It adds twice as many one-touch programs, bringing the number to 28, and the pressure release valve on the lid has a plastic steam diffuser cap that really did result in a quieter release. It has a more advanced interface than the Duo, the display has a cooking progress status bar, and the inner pot has silicone inner pot handles; the steaming rack also has an extra sealing ring. The recipes all turned out well, although not quite as well as our winners. It’s a great pressure cooker, but we prefer the added convenience of the Pro Plus for about $20 more.

With a strong and sturdy stainless steel pot and a lid that easily locks into place, we were big fans of the Vitaquick. For one, its large blue pressure indicator is easy to see, with two white ring markings: one ring means it’s at low (or gentle) pressure, two means it’s at high pressure. Other great features: a removable handle that makes cleaning a snap (remove the gasket in the lid and it’s all dishwasher-safe), clear measuring markings on the inside of the pot that mean you don’t need to dirty extra dishes, and a handy helper handle to carry it without fear of dropping the thing. The materials are high quality and we appreciated the added safety feature of a lid with a button that turns green and clicks when it’s locked into place. We also really liked the steam release function in the handle that requires just the push of a button to begin rapid release, and that it comes with a lifetime warranty. So what kept it from winning? The Kuhn Rikon did just a bit better job on the risotto and costs a little less. But the Vitaquick was a very close runner-up.

Like the Vitaquick, the Fissler Vitavit is a wonderful stovetop pressure cooker. With a polished stainless steel finish and removable handle, it also includes a locking indicator that makes positioning the lid into place easier than other models we tested. But our favorite feature is the traffic light-like indicator that delineates between the three pressure indicators: yellow (building pressure), green (correct pressure) and red (too much pressure) so you can adjust your burner accordingly. There is also a no-pressure steam setting and the cooker has settings for gentle and fast cooking. As for the build, the long looped handle and helper handle make it comfy to grab and we appreciated the contrast in the inner pot’s measurement guide (most models are etched and hard to read). We also like that the steam release function can be used from the handle or directly from the control valve. The recipe results were similar to Kuhn Rikon and Vitaquick so, while we really liked this model, the lower price and solid build of the Kuhn Rikon tipped the scales in its favor.

If an entry-level stovetop pressure cooker is something you’re interested in trying out, the popular Presto is a nice place to start. It did an OK job compared to the higher end models, though the risotto was on the soupy side when time was up, the beans needed an extra 10 minutes and weren’t cooked as consistently as our winners, the stew veggies were a bit overly cooked and the broth needed to thicken up a tad more. Once we compensated for the longer required cooking times, we saw good results.

The pressure gauge can be difficult to read, and the pot rattled more than others and also required more babysitting to keep the temperature right. And the handle isn’t comfortable compared to the other models we tested (plus the Presto ships disassembled, so you’ll need to grab a screwdriver to attach the handle). But we appreciated that it’s made of stainless steel when other inexpensive pots are often aluminum—which is a must for those with an induction cooktop or who like to make tomato-based or other acidic dishes. Overall, it’s a pressure cooker that will get the job done. And it has a whopping 12-year limited warranty, where most other affordable models top out at one year. Still, for an additional $20, we preferred the T-fal Clipso.

The stainless steel stovetop version of the Zavor Duo comes to pressure in just a couple of minutes. It features a lid that’s easy to lock into place: align the lid and pot handles and switch the yellow lock tab down, and it will stay firmly sealed until all pressure is released. A pressure regulator knob allows you to choose low or high pressure, as well as steam release and clean. And the pressure indicator was easy enough to read at the top of the lid handle. It’s dishwasher safe and comes with a steamer basket and trivet, and we liked the addition of a helper handle plus its generous 10-year warranty. It did well on our recipe tests as well. The risotto, beans and stew all required longer cook times than other models, but reached their desired consistencies eventually. So, while we liked the Zavor Duo quite a bit, the T-fal Clipso performs similarly and costs $30 less, thus getting our budget nod. But if you prefer a longer handle on your stovetop pressure cooker, we think you’ll have great success with this model.

In a fraction of the usual time, prepare healthy, delicious meals with the T-fal Clipso pressure cooker. Compared to standard cooking methods, the pressure cooker reduces cook times by up to 70% for faster results while retaining valuable nutrients and flavor. The cooker"s 6.3-quart capacity makes it easy to create large batches, whether preparing make-ahead meals for the week or cooking for a crowd during the holidays. The pressure cooker’s durable stainless-steel construction ensures optimal cooking and long-lasting performance, and its encapsulated base distributes heat evenly and can be used safely on any cooktop, including induction. Safety features include an innovative one-hand system for risk-free opening and closing, the inability to open when in use and under pressure, a variable steam-release valve for added control, and side handles for secure carrying. The Clipso stainless-steel pressure cooker can go safely in the dishwasher (with gasket and pressure valve removed), and a steam basket and stand are included for multi-level cooking, along with a recipe book with cooking tips.

Modern pressure cookers have a number of safety features and this is for good reason. The heat generated by the steam could easily scold if not handled properly. Follow the instructions for your specific model and you won’t need to worry about this.

It’s important to keep your pressure cooker clean and in good working order. Replacements for worn out parts are usually readily available from suppliers. For example you might find yourself needing to replace the rubber gasket that ensures a good seal. Making sure the valves are free from debris is key too.

Pressure cookers cook with steam. No liquid = no steam. You can’t and shouldn’t use your pressure cooker unless you’ve added sufficient liquid. Instructions will let you know the minimum amount and some even tell you how much to use for different items. If you’re using a conventional recipe you can often reduce liquid content that would otherwise have evaporated but don’t go below the recommended amount.

Most, if not all, pressure cookers have a minimum and maximum mark on the inside of the pot. Do not exceed these. A pressure cooker shouldn’t be more than 2/3rds full. With liquids, avoid filling more than half full. Overfilling leads to food being ejected from the pressure release valve – a messy business. If this does happen, you’ll need to take apart and clean the parts thoroughly. You also need room in the pot for the steam to build up to facilitate cooking.

Turn your hob up to full power so that the pressure cooking process can begin as soon as possible. If you take too long heating foods up, they can end up being overcooked and suggested timings will be incorrect. Recipes will tell you to start cooking from when the correct pressure has been reached. When you get to this point, turn the heat right down to the minimum temperature you can while still maintaining pressure. All pressure cookers have a simple indicator and your instructions will tell you how to read yours.

Cooking times in standard recipes are a good indicator for estimating time needed in a pressure cooker. Meats that take time to tenderise and large pieces of meat are going to take longer. Whole pulses will need longer than split peas, brown rice longer than white. Vegetables and fish take very little time at all. Cooking time may be as much as halved.

There are usually three ways to release steam in your pressure cooker: a) taking it off the heat and allowing it to release in its own time b) turning a pressure release valve – use oven gloves for this as hot steam will rush out, and c) running the pressure cooker under a cold tap. The first option is ideal for dishes like casseroles where long cooking times would be involved. The second option is suitable for any dishes that aren’t delicate and the third those that are, like fish and vegetables where overcooking may occur. These last two options save time.

Never force the lid open, modern cookers have a safety feature which stops you opening the lid, don’t tamper with this to get the pot open or you may get burnt. If you’re in a hurry, run the cooker under the cold tap, until the pressure indicator drops and the lid comes off easily.

Moisture is retained during pressure cooking which means sauces don’t thicken. You can thicken afterwards by leaving your pressure cooker on the heat once the lid is removed and reducing. A mixture of cornflour and water added at this point will help it along.

This goes for the food and the equipment. The materials that most pressure cookers are made out of are not designed for food storage. Once you’ve cooked your dish, decant it to something else for storage to avoid erosion or marking.

Pressure cooker lids are not designed for the dishwasheror for immersion in water. Wash them under a running tap and clean with washing up liquid, taking off the rubber gasket (lid seal) for a proper clean. Some pots are suitable for dishwashers, others not. Check the instructions. Otherwise wash in the sink. Other parts don’t need to be taken apart and cleaned individually every time but will do if they become blocked. Instructions will explain how to do this.

Dry your pressure cooker thoroughly. Leaving it out on a tea towel, rather than popping it straight in the cupboard will allow air to circulate. Rest the lid upside down on top when storing rather than fitting it on the pot.

Pressure cookers of the domestic type generally have an escape port, usually in the removable cover of the cooker, and the pressure within the cooker is regulated by a relief valve controlling the port. Relief valves are well known and a common type comprises a valve member and a valve seating, one of which acts against the other under pressure of a predetermined weight. When it is desired to vent the cooker, for example, when cooking is finished, the valve has to be opened. This can cause a rapid escape of steam and hence the operator has to take care to avoid being scalded.

According to the invention there is provided a pressure cooker relief valve assembly comprising a valve member and a valve seating one of which acts against the other under the pressure of a predetermined weight to close a valve port, the assembly including a skirt portion surrounding the valve port to form a chamber, the chamber having an opening in the skirt portion so that gas entering the chamber through the valve port can escape from the chamber to the atmosphere in substantially a sinqle predetermined direction and the skirt portion forms part of the mass of the predetermined weight.

The opening in the chamber enables escaping gases (e.g. steam) to be directed away from the user and escaping steam may also entrain air which can help to provide cooler conditions for the user in the vicinity of the valve. The skirt portion forms part of the mass of the predetermined weight and thus the valve member including the chamber can form a compact design which may be easily removed as a unit in order to gain access to the valve seating, e.g. for cleaning purposes.

Preferably the valve member includes a hand grip portion to enable the valve to be manually manipulated (e.g. to open the valve) and the opening in the skirt is arranged to direct escaping gases away from the hand grip portion.

In a preferred embodiment the chamber has an inner wall surrounding the valve port, the inner wall having an opening therethrough such that gas from the valve port can pass into the chamber through the opening in the inner wall and from the chamber to the atmosphere through the opening in the skirt portion.

With many existing types of pressure cookers it is necessary to manually lift the weight off the valve seating when it is desired to open the valve. This operation requires the weight to be firmly grasped and this can be a disadvantage if escaping steam is issuing from the valve. Alternative methods of venting the cooker include lifting the weight by means of, for example, a pivoted lever or a sliding wedge. These mechanical methods for lifting the weight are complicated and hence expensive to produce.

Accordingly the pressure cooker relief valve assembly may include means for relieving the pressure of the weight by axially rotating the weight and a cam surface relative to each other, the rotation causing the weight to be tilted relative to the valve seating. The valve assembly can be opened by simple rotation of the weight relative to the cam surface. Either the weight or the cam surface or both can be rotated. Preferably the cooker is vented by manual rotation of the weight in which case the weight need only be handled momentarily to turn it through a small angle. In an alternative embodiment the rotation may be achieved by, for example, a clockwork timer acting through a linking mechanism. The tilt of the weight caused by the rotation, whether manual or mechanical, can aid in directing the escaping steam in a predetermined direction, e.g. away from the user, especially if the underside of the weight is in close proximity to another surface. The direction of the escaping steam is further controlled by the opening in the surrounding chamber as explained above, through which any gas (e.g. steam) entering the chamber through the valve port can escape.

As shown in the FIGS. 1 to 6 of the drawings, the first embodiment of a pressure relief valve assembly is indicated generally by reference numeral 1 and is mounted on the lid 2 of a pressure cooker. The assembly includes a valve of known type including a valve seating 3, incorporating a valve support 4, held in position by a wing nut 5 within the lid 2. A port 6 extends through the seating 3 and this can be closed by a valve pin 7. A weight 8 is attached to the upper end of the pin 7.

The weight 8 is retained by the valve support 4 by means of a snap ring 9 and locking ring 10 such that the pin 7 can rotate in the seating 3 and be tilted and lifted by the mechanism described hereinafter or the weight 8 with its attachments can be removed from the seating 3 for cleaning purposes.

Mounted on the lid 2 below the weight 8 is a valve seat collar 13, the structure of which is shown specifically in FIG. 5. The upper face of the collar comprises a cam surface consisting of a flat surface 14 and a recess 15.

Attached to the weight 8, and covering its upper surface, is a cover 16. The cover 16 includes a hand grip portion 17 and an opening 18 (shown most clearly in FIG. 4) in a side wall opposite to the hand grip portion. Extending from the cover 16 are side walls 19 forming an outer skirt which together with the cover 16 forms a chamber surrounding the valve.

In the position shown in FIG. 1 the valve is in the closed or sealed position. The prong member 12 of the weight 8 is within the recess 15 of the collar 13 and the pin 7 is firmly seated on the valve seating 6.

When it is desired to open the valve the cover 16 is rotated through a small angle thus rotating the weight 8. The prong member 12 is thus cammed out of the recess 15 on to the top face 14 of the collar 13. This causes the weight 8 to be tilted and raised, lifting the pin 7 off the seat 3. The valve is thus opened. Any steam within the pressure cooker is released into the chamber formed by the cover 16 and side walls 19 and out through the opening 18, in a direction away from the hand grip 17. The dimensions and shape of the chamber and the opening are chosen so as to minimise the noise level of the escaping steam.

The modified valve seat collar 13" shown in FIG. 6 is similar to that shown in FIG. 5 in having a recess portion 15" and a flat surface 14" forming a cam surface for the prong member 12. The collar 13", however, has two horizontal extensions 20 and 21. A downward extension of the weight 8 can fall between extensions 20 and 21, so that the extensions act as stop members only allowing rotation of the weight through a small angle.

The modified pressure relief valve assembly will now be described with reference to FIGS. 7 to 11. The modified assembly is indicated generally by reference numeral 21 and is mounted on the lid 22 of a pressure cooker. The assembly includes a valve of known type including a valve seating 23, incorporating a valve support 24, held in position by a nut 25 within the lid 22. A port 26 extends through the seating 23 and this can be closed by a valve pin 27. A weight indicated generally by reference numeral 28 is attached to the upper end of the pin 27. The weight 28 comprises a plastic moulding 29 and an annular metal weight ring 30. The moulding 29 has an inner depending skirt portion 31 and an outer depending skirt portion 32. The inner skirt portion 31 has a slot 33 in one face. The outer skirt portion 32 has slits 34 in a corresponding face.

The valve assembly 21 is detachably mounted on the valve support 24 by means of a snap ring 36, held in position by means of a washer 37, such that the pin 27 can rotate in the seating 23 and be tilted and lifted by the mechanism described hereinafter or the assembly 21 cah be removed from the seating 23 for cleaning purposes.

A metal plate 40 extends substantially perpendicular to the outer skirt portion 32 and forms a bottom wall of the chamber. The metal plate 40 is provided with two cam lobes 41 which co-operate with the cam surface of the valve seat collar 42, described hereinbelow.

The valve seat collar 42 is mounted on the lid 22 below the weight 28. An O-ring 43 is retained between the collar 42 and the lid 22. The collar 42 has two recesses 44, 45 to receive the lobes 41. The recess 44 has a cammingsurface comprising a ramp 46. A stop 47 is provided by the vertical end wall of the recess 44. The collar 42 has an upstanding skirt portion 48, which in use, is situated within the inner skirt 31 of the weight 28. A cut-away portion 49 is provided in one face of the skirt portion 48.

In the position shown in FIGS. 7 and 9 the valve is in the closed or sealed position. The lobes 41 are situated within the recesses 44 and 45 of the collar 42 and the pin 27 is firmly seated on the valve seating 23.

When it is desired to open the valve the assembly 21 is rotated through a small angle by means of the handle 39. The lobe 41 within the recess 44 is cammed up the ramp 46 until further rotation is prevented by stop 47. The camming action causes the weight to be tilted and raised, as shown in FIGS. 8 and 10, lifting the pin 27 off the seat 23. The valve is thus opened. Any steam within the pressure cooker is released through the port 26, through holes in the valve support 24, out through the cut-away portion 49 in the skirt 48, through the slot 33 in the inner skirt portion 31 into the chamber between the inner and outer skirt portions 31, 32. The steam escapes from the chamber, in a direction away from the handle 39, via the slits 34 in the outer skirt portion 32, the slits being designed to deflect the steam in a partial upwards direction so as to control its forward projection. The dimensions and shape of the chamber and the various openings are chosen so as to minimise the noise level of the escaping steam.

Quick pressure release or natural pressure release?It’s one of the most common questions I get. Electric pressure cookers and multi-cookers like the Instant Pot, Ninja Foodi, and Crockpot Express have the ability to release pressure two ways. Instant Pot Natural Release is a frequent search term. Let me explain the difference!

Releasing the pressure can be a little intimidating to people who are new to pressure cooking—especially the quick release with the noise and jet of steam. But don’t let a little noise get between you and fabulous meals cooked in your pressure cooker!

Those are often the first questions new pressure cooker users ask. So I thought it would be a perfect time for a post explaining it for all those who have an electric pressure cooker or multi-cooker like the Instant Pot waiting for them under the tree.

When the cook time ends, your pressure cooker will beep. At this point, the recipe will direct you to release the pressure in the cooking pot. You can release the pressure two ways: a quick pressure release or a natural pressure release.

A quick pressure release is when you turn the pressure release switch to the Venting position and let the steam to release quickly when the cook time ends. This will result in a strong jet of steam coming from the pressure release valve. This is normal.If drops of liquid or foam start to emerge from the pressure release valve, simply switch the valve back to the Sealed position and use an Intermittent Pressure Release (more on that below).

Other pressure cookers may have different labels, but it’s the same basic principle. Turn the valve to allow the steam to escape / pressure to release.

When the pressure is fully released, the float valve will drop and the lid will unlock to open. For safety reasons, the pressure cooker will not open until the pressure is released and the float valve has dropped.

A natural pressure release is when you leave the pressure release switch in the Sealed position when the cook time ends. This lets the pressure release slowly, without you doing anything. When the pressure is fully released, the float valve will drop and the lid will unlock and open.

A natural pressure release is a bit anticlimactic in comparison to a quick pressure release. There is no jet of steam when the natural pressure release starts. There’s also no clear way to tell when the pressure is fully released, and no beep or signal when the lid unlocks. Sometimes you can hear the float valve drop if you’re close by.

The time it takes for the pressure to release naturally will vary depending on the ingredients and amount of liquid in the pressure cooker. A natural pressure release can take from 5 to 30 minutes in the electric pressure cooker.

Using a natural pressure release allows the cooking to stop gradually. You don’t want to open the valve quickly when the ingredients inside could be foaming. You’ll get foam shooting out through the valve, so use a natural pressure release when making steel cut oats, a large pot of soup or pasta.

With this method, you open and close the pressure release valve in short intervals. This allows the pressure to escape more quickly than a natural pressure release and also prevents foam from coming out of the pressure release valve.

With some foods, one or two closed intervals is all I need before I can leave the valve in the Venting position; with other foods, if the foaming is particularly bad, I will close the valve and wait a minute or two, then slide the valve to Venting again and continue opening and closing the valve as needed.

No you do not need to turn the pressure cooker off for a quick or natural pressure release. The pressure will release on the Keep Warm setting. The benefit of not turning it off is that the time will count up so you can see how long it’s been since the pressure cooking time ended.

I prefer to turn off or unplug the pressure cooker before I do a quick pressure release or natural pressure release. I seem to always forget to turn off the pressure cooker if I don’t turn it off when the pressure cooking ends. I also prefer to set a timer to remind me 10 minutes has passed and it’s time to release the pressure when I’m doing a natural pressure release.

Once you have your first meal under your belt, move on to some easy pressure cooking recipes. Before you know it, you’ll be making fabulous pressure cooker meals and wondering how you ever cooked without it.

That ensures that nothing interferes with the lid of the pressure cooker, which is where most of the other safety systems are. Also, check that the primary valve is clean and clear before pressure cooking.

If something were to go side-ways, even before it gets to that point, the pressure cooker itself will detect that the pressure (temperature) inside is too high and turn off the pressure cooker.  But, while that’s happening, though, the food inside is still boiling and building pressure so the cooker will release excess pressure from the valve on the lid. And, if the main valve were to be clogged the cooker will release pressure from the lid-lock or secondary valve. If that were to be blocked, the cooker will release pressure from the gasket.

The last safety system of for absent-minded cooks like me. Where at the last minute I realize, “Oh, I need to add some carrots” and try to open the pressure cooker during cooking.  Well, the lid locks automatically the minute pressure starts to build. It means that if there is any pressure still inside the cooker, you cannot open the lid.  It’s a mechanical system so even if there is no electricity you will still be prevented from opening the lid.