honeywell safety valve supplier

Sign up to receive exclusive communications from Honeywell including product updates, technical information, new offerings, events and news, surveys, special offers, and related topics via telephone, email, and other forms of electronic communication.

D22 pressure reducing valves protect installations against excessive pressure from the supply. They can be used for industrial or commercial applications within the range of their specification. Because pressure reducing valves are subject to wear, they cannot be used as the only means of protection and if the downstream system needs to be protected against excessive pressure to prevent leakage, then a suitable safety valve must be fitted.

The Honeywell Kromschroder’s VSBV safety relief valve reduces temporary pressure surges in the controlled system. When pressure builds upstream of the burners, the VSBV will purge this extra pressure to keep the JSAV safety shut-off valve from being activated unintentionally. It will also reduce temporary pressure surges caused by fluctuations in the system operation downstream, or a too-high pressure increase caused by gas creeps that result from gas pressure regulators that are not tight-closing.

The TS131 temperature relief valve for heating systems according to EN 12828 is a self-acting valve which is activated by the flow temperature of the heat generator. It opens and discharges water from the heat generator or condensing coil at a flow temperature of 95 °C and thereby prevents a significant temperature rise in the heat generator.

Materials: Valve body, spring cover and brass temperature sensor well; double copper temperature sensor with capillary tube; copper capillary; valve piston made of brass; valve seat gasket of heat-resistant elastomer.

The Resideo Braukmann SV300 Pilot Operated Safety Valve is controlled by the medium flowing through it via a pilot valve. It is preferably installed in branches of supply pipework and protects downstream parts of a system which are at risk from unacceptable excess pressure which can, for example, be caused by pumps. If the inlet pressure to the valve rises up to the set opening pressure, then the valve opens immediately to the maximum flow position. If the pressure falls to the set pressure, then the valve closes slowly to prevent pressure shock loads.

The Honeywell V5055 series industrial gas valves are a Safety Shutoff Valve (SSOV) use with V4055 power actuators to control gas flow to commercial and industrial burners. V5055 normally closed valves are rated for final shutoff service safety shutoff.

V5055A gas valve is an industrial gas valve for On-Off service. V5055C is the same as V5055A but incorporates a double seal. Used with the V4055D Actuator to a provide proof-of-closure switch and a valve seal overtravel interlock.

Honeywell Braukmann PRV’s and Valves Solutions. Honeywell Braukmann is a world leader in providing water control solutions for applications in domestic and commercial buildings. Honeywell valves are available in bronze, brass and cast iron construction of premium quality, are well known for accuracy and reliability.