kingston safety valve factory
Since 1908, Kingston Valves has been designing and building high-quality, reliable industrial valves, including go-tos like check valves, pressure relief valves and brass diverter valves. Kingston Valves manufactures and supplies a variety of soft and hard seat brass and stainless-steel safety valves, check valves, flow control valves, drain valves, and custom OEM designed valves. Rest assured with their Quality System’s ASME certification, as well as other industry-specific certifications.
History and performance have proven Kingston to be a strong industrial valve manufacturer for many applications such as process control, steam fired autoclave sterilizers, hyperbaric therapy chambers, fire suppression, locomotive brake systems, compressed air systems and dryers, and food & beverage equipment.
About Kingston: Since 1908, F.C. Kingston has been manufacturing high quality valves for industry. KINGSTON"s broad product line of Safety Valves, Check Valves, and Flow Control Valves are easily tailored to meet the demands of your application. Kingston"s product line has grown over time to include custom OEM design, pressure safety, check and flow control valves.
The KNG Series Safety Relief Valves are designed for accuracy and reliability. The KNG Series offers relief valves ranging from 1/2" to 3" NPT (D-J) orifice in brass, carbon steel, and stainless steel materials to service various applications.
The Kingston Model 314 Burner Valve is designed for use with LP-gas, where a controllable flame is required for burning weeds, brush or other spot burning or heating applications. Constructed of heavy cast and bar-stock brass, precision machined for smooth operation each valve is equipped with a squeeze type control lever, Buna-N seals, and needle valve for pilot control.
The Kingston Model 314 Burner Valve has a l/4" female inlet and separate l/4" pilot and main burner outlets. Main port located on the top, pilot port on the bottom. Wire lock ring to hold valve in open position, for ease of operation.
The Kingston Model BV Industrial Solenoid Valves are designed for applications requiring the durabilty of brass and stainless steel construction. These high performance normally-closed flow control valves are individually tested to 180 psi and precision manufactured from non-corrosive, 123 ingot red brass. Kingston Model BV Industrial Solenoid Valves have been in production for over 35 years and are built to perform.
Kingston Model 114 ASME Code Soft Seat Safety Valves are constructed of brass with a Viton seal and positive stop for a bubble-tight seal. This valve is also equipped with a protective stem cover and manual test lever. Internal construction and performance are the same as Model 115 differing only by the test lever. The Kingston Model 114 ASME Code Soft Seat Safety Valve, like every Kingston Safety Valve, is set and tested at factory for quality and dependability. The Kingston Model 114 ASME Code Soft Seat Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.
Kingston Model 114 ASME Code Soft Seat Safety Valves are constructed of brass with a Viton seal and positive stop for a bubble-tight seal. This valve is also equipped with a protective stem cover and manual test lever. Internal construction and performance are the same as Model 115 differing only by the test lever. The Kingston Model 114 ASME Code Soft Seat Safety Valve, like every Kingston Safety Valve, is set and tested at factory for quality and dependability. The Kingston Model 114 ASME Code Soft Seat Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.
The Kingston Model 112CSS Safety Valve is an ASME Code Certified, precision machined brass valve with a hard seat. This valve supports ASME Code applications up to 300 psi. It also features a stainless steel ball for durability and a pull ring for manual testing. As Kingston’s most popular valve, it is suited for a wide variety of applications.
The Kingston Model 112CSS Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.
Kingston Valves, California-based industrial valve manufacturer, releases new stainless-steel soft seat models for the KSV Soft Seat Safety Valve line. The new low profile, stainless-steel KSVCR models offer long-lasting performance in corrosive environments.
The KSVCR ASME Section XIII and National Board-certified valves feature a stainless-steel body and components. They are available in a broad range of sizes, ranging from 1/4” to 1 ¼” and achieve some of the industry’s best flow rates. Additional options include oxygen cleaning, thread sealant, and steam service. Suitable for air, gas, and steam mediums, Kingston’s KSCVR valves provide application and design flexibility.
The stainless-steel models allow for maximum operating temperatures up to 400°F. Kingston safety valves are factory set to the designated pressure. Available now, with 5-to-7-day lead times.
Established in 1908, Kingston has been a leader in the safety relief valve manufacturing business; primarily focused on the brass industrial valve market, they have an expert understanding of industrial OEM and Distribution customer needs and challenges. The Kingston brand has a longstanding history within the compressed air/gas/steam/liquid markets. Kingston Valves is an ISO 9001 certified company with world class lead-times. Consolidated within The Storm Manufacturing Group, Kingston brand valves continue to represent the performance and reliability that have been the industry standard for over a century. For more information, visit www.kingstonvalves.com.
The Kingston Model 110C High Pressure Safety Valve is an ASME Code Certified, precision machined valve with a hard seat. This valve features support for high pressure applications up to 600 psi. It comes equipped with manual test lever and is construction is of cast brass alloy body, machined brass stem with stainless steel ball, seated on a stainless steel base. The Kingston Model 110C High Pressure Safety Valve approved in Massachusetts and Washington DC and is stamped with UV and NB symbols. Registered in all Canadian provinces and territories.
Since 1908, Kingston Valves has designed and built high-quality, reliable industrial valves. Our Safety Relief Valves and flow Control valves have provided proven solutions for critical process control applications across multiple applications.
The Kingston Quality System is ASME certified. We incorporate strict quality guidelines in our manufacturing and assembly processes. ANSIY14.5 dimensioning and tolerance guidelines are followed for drawing and blueprint control and we utilize a Statistical Process Control (SPC) within our manufacturing process to control critical dimensions.
Our Kingston KNG safety valves offer relief valves ranging from ½” to 3” NPT (D-J) orifice in brass, carbon steel, and stainless-steel materials to service various applications. The KNG valves are ASME Section I or Section VIII National Board (NB) certified for air, gas, steam, and liquid services up to 1500PSI.
We also feature a complete line of Condensate Drain products for compressor applications. Kingston’s Timer Drain Valves (KTD) are designed to provide efficient drainage of condensate from compressor tanks. We also offer a mechanical valve for compressors with an unloader.
The Taylor 8250 Safety Relief Valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 for Air/Gas and Liquid service making it an excellent choice for Air, Gas or Liquid relief applications
The 8250 redesign is just the beginning of new things to come from Taylor Valve, the ORIGINAL SELF ALIGNING TECHNOLOGY company.Self-Aligning seat technology allows for repeatable uses without resetting or repair.
The Taylor 19BV Series Pressure Relief Valve is manufactured in accordance with the requirements of ASME certified by the National Board of Boiler and Pressure Vessels in
The Taylor 19BV Pressure Relief Valve has numerous application uses. Since the Series 19BV is certified for both gas and liquid on both orifices, it can be installed
where relief applications that have variable back pressure are present. Thermal valves, pump recycle, separators (liquid side), water knockouts, etc. are just a few examples of
Our 8200/8300 Series safety relief valves are engineered and manufactured to the highest standards and feature a high endurance soft seat which guarantees a bubble-tight seal for hundreds of “pops”. Our unique patented radius disc design guarantees dependable, repeatable relief even under the most difficult of conditions.
Taylor Valve Technologies 8200 Series are no longer being produced Kings Energy Services can support 8200 series valves that are in service. If you require a replacement for your 8200 Series please to Taylor Valve Technologies new 8250 Series.
Features & BenefitsEasily AdjustedThe adjustable set pressure is accurate and dependable. Adjustable blowdown is external, which reduces time and cost consuming expenditures of valve removal. System downtime is also greatly reduced.
Increased Output of SystemThe valve can be set within 5% of system operating pressure allowing the process to be maintained at close tolerance without valve leakage. This results in greater process system output.
The 7700 Back Pressure Regulator (BPR) Series is an excellent and economical device for relief and control of pressure in liquid and gas service. Valve control is accomplished by upstream pressure acting on a lapped piston, which is acted on by a spring. The valve will open at a determined set pressure, which is field adjustable.
Pump Bypass, Pump Relief, Well Hookups and Closed Loop Systems, Balanced Valve Applications, By- Pass to Casing, Pump Backpressure - Allows the pump to operate more efficiently, Pipeline Thermal Relief
The8400 Series Vapor Valveprovides pressure relief in applications where hazardous vapors are to be piped away. The Vapor Valve is a non-ASME code valve, and specifically addresses low-pressure applications (below 15 PSIG). The valve uses a spring which directly opposes system pressure. A fully-guided, stainless steel disc senses the system pressure. If the system pressure ever reaches the valve’s determined set pressure, the disc will release from its seated position, venting system pressure.
TheEPCensures valve and system protection from environmental elements, enhancing service life and limiting repair costs. Our unique lanyard design and NOW our new threaded option add a leak detection capability that sets us apart from other competitive products.
Pressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators, By-pass and Over Pressure Protection. Choose for most industrial applications requiring a safety relief valve.
Pressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators, By-pass and Over Pressure Protection. Choose for most industrial applications requiring a safety relief valve.
Pressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators, By-pass and Over Pressure Protection. Choose for most industrial applications requiring a safety relief valve.
Pressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators, By-pass and Over Pressure Protection. Choose for most industrial applications requiring a safety relief valve.
8613371530291