nabic safety valve supplier

NABIC is one of the UK"s leading manufacturers of gunmetal safety valves and relief valves. NABIC is manufactured by Crane BS&U. NABIC is an acronym for National Boiler Insurance Company and its roots date back to Manchester in 1864. It came into existence due to a rising tide of boiler explosions which were causing extensive damage to commercial properties and considerable loss of life. NABIC have long been recognised as the industry standard for commercial and industrial safety and relief valves for hot water applications. NABIC products are all UK made with castings from the UK and Europe. NABIC products do not have castings from the far east as with many of its competitors. Flowstar is the largest worldwide stockist of NABIC safety valves and relief valves with over £500K on stock. We can despatch the sameday orders received before 5.00pm. NABIC valves are fully made in the UK with castings from the UK and Europe unlike many of its competitors using components from the far east. NABIC products now also come with an industry leading 5 year guarantee.

Combination water meters comprises of a bulk Woltmann insert and a low-flow Volumetric insert or meter, flow is diverted between them by a by-pass valve that is set at a predetermined flow rate. This allows the combination meter to have a very large measurement range.

Whole products such as valves, boilers & showers undergo mechanical and water quality testing. This type of approval demonstrates full compliance with the requirements of the regulations and bye-laws, provided the fitting is installed according to any conditions given with the approval.

BS EN 331:2015 specifies the characteristics for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking provisions. It applies to metallic valves not directly buried for domestic and commercial installations inside or outside of buildings, using gases of the first, second and third family (specified in EN 437) and working up to 0,2 × 105 Pa, 0,5 × 105 Pa, 1 × 105Pa, 5 × 105 Pa and 20 × 105Pa and with temperature limits from – 5 °C or -20 °C to + 60 °C.

Classification, verification, risk management, and technical advisory to the maritime industry on safety, enhanced performance, fuel efficiency, etc. As a classification society, DNV GL sets standards for ships and offshore structures – known as Class Rules. They comprise safety, reliability and environmental requirements that vessels and other offshore mobile structures in international waters must comply with. DNV GL is authorized by 130 maritime administrations to perform certification or verification on their behalf.

Valves have been qualified by testing to API standards 607, 4th Edition. The valve design incorporates a secondary metal seat in the body, providing the required shutoff should the primary seats be destroyed by fire.

Many of our marine valves can be pressure tested, witnessed by a classification society and supplied with 3.1 & 3.2 certifications on request, these include Lloyd’s Register of Shipping, DNV-GL (Det Norske Veritas), RINA, Bureau Veritas, Germanischer Lloyds, NK and ABS (American Bureau of Shipping). Please contact sales with your requirements.

NABIC have long been recognised as the industry standard for commercial and industrial safety and relief valves for hot water applications. NABIC products are all UK made with castings from the UK and Europe. NABIC products do not have castings from the far east as with many of its competitors.

Flowstar (UK) Limited (Company Number: 01384915, VAT Number: GB 475 448 317) is the largest worldwide stockist of NABIC safety valves and NABIC relief valves. Our NABIC prices are genuine discounts off the official NABIC list price. We have not increased our prices before discounting as on some websites. If you buy NABIC valves on a regular basis we can offer further discount and will price match were possible.

Returns: You need to tell us if you wish to return un-used goods within 14 days of purchase either by phone or email. You then have a further 14 days to return the goods back to us. We aim to process the refund within a few days of receiving them. Please note we charge a 20% restocking fee. This is to cover the work originally carried out setting and testing the valve and also the work we will need to do on its return to get it ready for resale.

NABIC have long been recognised as the industry standard for commercial and industrial safety and relief valves for hot water applications. NABIC products are all UK made with castings from the UK and Europe. NABIC products do not have castings from the far east as with many of its competitors.

Flowstar (UK) Limited (Company Number: 01384915, VAT Number: GB 475 448 317) is the largest worldwide stockist of NABIC safety valves and NABIC relief valves. Our NABIC prices are genuine discounts off the official NABIC list price. We have not increased our prices before discounting as on some websites. If you buy NABIC valves on a regular basis we can offer further discount and will price match were possible.

Returns: You need to tell us if you wish to return un-used goods within 14 days of purchase either by phone or email. You then have a further 14 days to return the goods back to us. We aim to process the refund within a few days of receiving them. Please note we charge a 20% restocking fee. This is to cover the work originally carried out setting and testing the valve and also the work we will need to do on its return to get it ready for resale.

NABIC (National Boiler Insurance Company) is a leading UK manufacturer of outstanding safety and pressure relief valves and control valves. Produced from gunmetal and stainless steel, these endlessly versatile valves are suitable for use with various types of fluids, including hot water, steam and air across vented and unvented heating systems, compressed air systems, hot water and steam boilers, and pump relief and bypass.

Boasting a rich history of innovation and excellence, NABIC traces its origins all the way back to 1864. Born out of a need to insure commercial activities, the company quickly set the bar and became an industry standard in the boiler industry. It continued to expand through a series of mergers and acquisitions over the following years, and in 2008, it was acquired by US multinational corporation Crane. In 2015, it moved its manufacturing site to Hitchin, Hertfordshire.

NABIC manufacture in the UK a range of safety and pressure relief valves as well as control valves in gunmetal and stainless steel suitable for a wide variety of fluids including steam, hot water and air. NABIC valves are ideal for vented and unvented heating systems, hot water and steam boilers, compressed air systems, pump relief and bypass.

NABIC is an acronym for National Boiler Insurance Company and came into existence due to of a rising tide of boiler explosions which were causing extensive damage to commercial properties and considerable loss of life

NABIC has a rich history dating back to 1864 and the Victorian Age - it is a brand name built on pedigree and trust. NABIC is an acronym for National Boiler Insurance Company and came into existence due to a rising tide of boiler explosions which were causing extensive damage to commercial properties and considerable loss of life.

For instance, in 1854 there was a boiler explosion in Rochdale which killed ten people. The inquest ruled that the incident NABIC � Offers a Comprehensive Range of Safety & Control Valves was caused by neglect � one safety valve was inoperative and the other had been over-weighted to �stop the boiler blowing off�. This incident was one of many that took place across the country in the industrial heartland of England which had the biggest concentration of steam boilers in the world and started the unstoppable process of making working environments� safer.

The NABIC Company was born out of necessity to insure commercial activities and they employed highly skilled engineers to carry out the inspections. So it was no surprise that the new Company was also keen to look kindly on any new inventions which would help safeguard boilers. In 1863 John Smith patented a fusible plug for boilers and NABIC bought the rights in 1864 for �2000 and this provided the base for the company to grow.

NABIC commenced manufacture ensuring the quality of the fitting and offered customers a 10% reduction in premiums if they fitted them. NABIC set the trend as fusible plugs were so effective and other companies followed their lead and told their customers to request NABIC. The name became the industry standard, a modern day �Hoover� for the boiler industry and still carries gravitas today.

All valves are manufactured in the UK, and pressure set to customer specific requirements. And now, for the first time NABIC valves are available to purchase online direct from the manufacturer, via a Fastrack next day service. The platform has been built to improve the customer experience and to be effective in the field as the site is optimised to handle the latest smartphones and tablets.

NABIC is a leading brand of Crane Building Services & Utilities and offer a range of safety valves that serve a variety of industries including Education, Healthcare, Petrochemical, Food, Power Generation, Leisure and Commercial Heating protecting life and property against failure to control system pressures.

The NABIC range of valves comprise automatic air vents to remove trapped air from a sealed system and three way vents and cocks to allow for easy maintenance while the system is still running.

Pipe interrupters are safety devices designed to protect potable water systems. They prevent the backflow by automatic ventilation of the system and elimination of the vacuum.

The Royal Edinburgh HospitalProject: Royal Edinburgh Hospital Client: McCallum�s Water Heaters Contractor: BBESL in Scotland Specifications: NABIC Fig. 500T Combined Pressure & Temperature Relief Valves, Fig. 542 Safety Relief Valves, Fig. 568 Anti-Vacuum Valves.

NABIC Safety Valves were installed in the �48million recently developed special care unit at the Royal Edinburgh Hospital. The vast programme of works at the Royal Edinburgh Hospital campus, which started in January 2015, will see the entire site transformed over the coming years with modern and fit-for-purpose facilities. Phase one redevelopments include new accommodation for the adult acute mental health inpatient service, older people�s mental health assessment, Intensive Psychiatric Care Service (IPCU) and the new Robert Fergusson National Brain Injury Unit.

NABIC Safety Valves were supplied to McCallum�s Water Heaters who have built the Skid unit plant rooms and Chlorifier�s. McCallum�s currently choose NABIC valves in all of their major projects due to the trusted brand name which ensures products of a high quality, reliability and longevity.

Project: St Pancras Renaissance Hotel, London Client: Marriott Hotels Contractor: EMCOR UK Distributor: BSS (Kings Cross) Ltd. Specification: NABIC Fig. 500 High Lift Safety Valves

NABIC Fig. 500 valves were installed in the plant rooms of the sumptuously renovated five star St Pancras Renaissance hotel which opened to much fanfare. The luxury accommodation consists of 245 bedrooms, 38 suites, 9 meeting rooms the Gilbert Scott restaurant & bar, health club and spa.

The NABIC safety valves are installed in all 5 boiler rooms helping to provide hot water to bathrooms on the hotel�s seven floors. The Fig. 500 is WRAS approved and designed for use on unvented systems where a high capacity emergency steam relief capability is required.

Manufactured in the UK a range of safety and pressure relief valves as well as control valves in gunmetal and stainless steel suitable for a wide variety of fluids including steam, hot water and air. NABIC valves are ideal for vented and unvented heating systems, hot water and steam boilers, compressed air systems, pump relief and bypass.