nabic safety valve price

NABIC have long been recognised as the industry standard for commercial and industrial safety and relief valves for hot water applications. NABIC products are all UK made with castings from the UK and Europe. NABIC products do not have castings from the far east as with many of its competitors.

Flowstar (UK) Limited (Company Number: 01384915, VAT Number: GB 475 448 317) is the largest worldwide stockist of NABIC safety valves and NABIC relief valves. Our NABIC prices are genuine discounts off the official NABIC list price. We have not increased our prices before discounting as on some websites. If you buy NABIC valves on a regular basis we can offer further discount and will price match were possible.

Returns: You need to tell us if you wish to return un-used goods within 14 days of purchase either by phone or email. You then have a further 14 days to return the goods back to us. We aim to process the refund within a few days of receiving them. Please note we charge a 20% restocking fee. This is to cover the work originally carried out setting and testing the valve and also the work we will need to do on its return to get it ready for resale.

The Fig 542 Safety Valve is an extremely versatile valve, suitable for use on hot water, steam or air. Although designed primarily for the protection of hot water boilers, its wide range of applications make it an ideal general purpose safety valve.

NABIC is one of the UK"s leading manufacturers of gunmetal safety valves and relief valves. NABIC is manufactured by Crane BS&U. NABIC is an acronym for National Boiler Insurance Company and its roots date back to Manchester in 1864. It came into existence due to a rising tide of boiler explosions which were causing extensive damage to commercial properties and considerable loss of life. NABIC have long been recognised as the industry standard for commercial and industrial safety and relief valves for hot water applications. NABIC products are all UK made with castings from the UK and Europe. NABIC products do not have castings from the far east as with many of its competitors. Flowstar is the largest worldwide stockist of NABIC safety valves and relief valves with over £500K on stock. We can despatch the sameday orders received before 5.00pm. NABIC valves are fully made in the UK with castings from the UK and Europe unlike many of its competitors using components from the far east. NABIC products now also come with an industry leading 5 year guarantee.

The Nabic Fig 542 is one of the most versatile, high-quality safety valves available today, suitable for use on a wide variety of media including use on hot water, steam and air. Utilized throughout the industry, it is highly popular for protecting hot water systems and boilers, although its wide scope of applications make it also commonly used as a general purpose safety valve.

Utilising a resilient PTFE seating design, the Fig 542 provides very high seat tightness. It offers the user safe manual testing, easy inspection and cleaning, and has diaphragm protected working parts. Manufactured in high quality gunmetal, the Nabic 542 is designed and tested to BS 6759 standard and is WRAS Approved and UKWFBS listed.

Dezincification resistant materials are used in making all the Nabic 542s wetted parts. Sizes DN40 or larger come fitted with a drain plug as standard, allowing for the optional fitting of a pressure gauge.

The valve is supplied pre-set at the pressure specified by the customer, and is strenuously shell and seat tested at the factory before dispatch. A tamper-proof seal is included.

Combination water meters comprises of a bulk Woltmann insert and a low-flow Volumetric insert or meter, flow is diverted between them by a by-pass valve that is set at a predetermined flow rate. This allows the combination meter to have a very large measurement range.

Whole products such as valves, boilers & showers undergo mechanical and water quality testing. This type of approval demonstrates full compliance with the requirements of the regulations and bye-laws, provided the fitting is installed according to any conditions given with the approval.

BS EN 331:2015 specifies the characteristics for the construction, performance and safety of ball valves and closed bottom taper plug valves. It also details the test methods and marking provisions. It applies to metallic valves not directly buried for domestic and commercial installations inside or outside of buildings, using gases of the first, second and third family (specified in EN 437) and working up to 0,2 × 105 Pa, 0,5 × 105 Pa, 1 × 105Pa, 5 × 105 Pa and 20 × 105Pa and with temperature limits from – 5 °C or -20 °C to + 60 °C.

Classification, verification, risk management, and technical advisory to the maritime industry on safety, enhanced performance, fuel efficiency, etc. As a classification society, DNV GL sets standards for ships and offshore structures – known as Class Rules. They comprise safety, reliability and environmental requirements that vessels and other offshore mobile structures in international waters must comply with. DNV GL is authorized by 130 maritime administrations to perform certification or verification on their behalf.

Valves have been qualified by testing to API standards 607, 4th Edition. The valve design incorporates a secondary metal seat in the body, providing the required shutoff should the primary seats be destroyed by fire.

Many of our marine valves can be pressure tested, witnessed by a classification society and supplied with 3.1 & 3.2 certifications on request, these include Lloyd’s Register of Shipping, DNV-GL (Det Norske Veritas), RINA, Bureau Veritas, Germanischer Lloyds, NK and ABS (American Bureau of Shipping). Please contact sales with your requirements.

Nabic Safety Valve 542 With Green Spring 3/4in N-542-020, bellows, gaskets galore; our Pipeline & Engineering ranges have what you"re looking for. From small structural details to industrial fittings, we"re confident in our Valves products to provide the ultimate item for your project.