oil burner fire safety valve in stock

Fusible Fire Safety Valves are designed to reduce fire damage by shutting off the flow of oil from the oil tank in the event of a fire. They are required by code in residential oil heating installations in conformance with NFPA 31.All valves are embossed with an arrow indicating the direction of oil flow

Oil-fired boilers need a steady, accurately measured flow of oil to operate safely and efficiently. Fuel oil valves and actuators work together to regulate that flow, while also providing safeguards in case of a fire.

Fuel oil valves regulate the flow of oil into the burner. Actuators are used to control those valves, allowing the boiler’s monitoring and control system to adjust the fuel supply automatically based on demand. This automated control helps keep the boiler operating within spec, and at peak efficiency.

Some valves and actuators are mounted in one self-contained housing, while other configurations use separate valve and actuator assemblies that are joined by a linkage.

Many fuel oil valves feature a Proof of Closure (POC) switch as well that sends a signal back to the monitoring system to confirm valve closure, or provides visual confirmation that the valve is closed.

Fuel oil valves and actuators work together to modulate the boiler’s fuel oil supply based on demand. They are also responsible for shutting off the supply of oil during shutdown, and turning the supply back on during startup.

Many valves even feature a special heat-activated failsafe that keeps the valve open under spring pressure, closing it mechanically if the valve gets too warm.

When a fuel oil valve goes bad, it will either deliver too much or too little oil. Sometimes, none at all. This will make the boiler hard to start, and will cause it to produce either too much or too little steam based on its settings.

Things to Consider about fuel oil valves and actuators:Some fuel oil valves and actuators can be mounted in the same housing, functioning as a self-contained unit. Others are mounted as separate components joined by a linkage.Self-contained valve and actuator assemblies are easier to swap out, but harder to maintain and repair.Separate valve and actuator setups can be easier to repair and maintain, but may take longer to install.

Explore over 750+ explanatory videos on boilers and boiler systems on our Youtube channel. Our videos can help you quickly grasp complex boiler topics. Watch more here!

A malfunctioning valve or actuator will cause the boiler to run too rich or too lean. It can also prevent proper startup. If you’re checking the valve, be sure to check the linkage and actuator, too. Loose linkage can cause the boiler to run out of spec.

Both are good solutions for operating a fuel oil valve safely. It just depends on how your monitoring and control system is set up, and whether it uses compressed air or electricity to power the actuator.

In the event of a fire valve is designed to shut down to stop further flow of oil. May be required by many state and local codes – but always a good idea even if your local/state codes don’t require.

NuEra Heat is the largest stocking distributor of EnergyLogic and BlackGold equipment and parts in the Pacific Northwest and Alaska. We’re experts in waste oil or used oil heating equipment with 30+ years of experience. We generally have many EnergyLogic heaters, furnaces, and boilers in stock and ready for same day shipping. Parts are shipped the “same day” they are ordered if the order is placed before 3pm Pacific Time. Serving the Alaska market for over 30 years we also serve Washington, Oregon, Idaho, Montana, Wyoming, Utah and almost anywhere UPS, USPS or FedEx will deliver. We provide service in the Portland, Or metro area – the Seattle, WA metro area, Anchorage, Fairbanks and most places in Alaska or the Pacific Northwest. We are happy to help with any questions about the products and we stand behind what we sell with service, support and friendly advice. Give us a call – we’re here to help: 1-800-347-9575.

EnergyLogic is a leading manufacturer of used oil furnaces and boilers. With the highest number of standard features and most comprehensive warranty on the market, EnergyLogic used oil furnaces and boilers can eliminate the cradle-to-grave liability, reduce heating costs and generally have a payback period of a single heating season and the lowest cost of ownership. All EnergyLogic waste oil heating systems are UL-listed and meet or exceed all EPA regulations. Tens of thousands of our energy-saving solutions are currently in use from small garages to the largest corporations in the world.

We’ve seen a number of these handles fail in the field and so we found a source for them – they are simple to replace and you don’t need to pull the valve out of the tank!

NuEra Heat is the largest stocking distributor of EnergyLogic and BlackGold equipment and parts in the Pacific Northwest and Alaska. We’re experts in waste oil or used oil heating equipment with 30+ years of experience. We generally have many EnergyLogic heaters, furnaces, and boilers in stock and ready for same day shipping. Parts are shipped the “same day” they are ordered if the order is placed before 3pm Pacific Time. Serving the Alaska market for over 30 years we also serve Washington, Oregon, Idaho, Montana, Wyoming, Utah and almost anywhere UPS, USPS or FedEx will deliver. We provide service in the Portland, Or metro area – the Seattle, WA metro area, Anchorage, Fairbanks and most places in Alaska or the Pacific Northwest. We are happy to help with any questions about the products and we stand behind what we sell with service, support and friendly advice. Give us a call – we’re here to help: 1-800-347-9575.

EnergyLogic is a leading manufacturer of used oil furnaces and boilers. With the highest number of standard features and most comprehensive warranty on the market, EnergyLogic used oil furnaces and boilers can eliminate the cradle-to-grave liability, reduce heating costs and generally have a payback period of a single heating season and the lowest cost of ownership. All EnergyLogic waste oil heating systems are UL-listed and meet or exceed all EPA regulations. Tens of thousands of our energy-saving solutions are currently in use from small garages to the largest corporations in the world.

"content":"\u003cp\u003eFusible valves are approved for kerosene and No. 2 fuel oil. Pressure rated for 10 P.S.I. Valves with standard hand wheel close at about 165 deg. F. ambient temperature. Double seal to prevent stem leaks. All fusible valve rubber washers and o-rings are made of Viton or equivalent material. 3\/8\" x 1\/4\".\u003c\/p\u003e",

"description":"\u003cp\u003eFusible valves are approved for kerosene and No. 2 fuel oil. Pressure rated for 10 P.S.I. Valves with standard hand wheel close at about 165 deg. F. ambient temperature. Double seal to prevent stem leaks. All fusible valve rubber washers and o-rings are made of Viton or equivalent material. 3\/8\" x 1\/4\".\u003c\/p\u003e",

[{"id":42893121356010,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"463910","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"OEM 3\/8 In. x 1\/4 In. Oil Tank Fusible Burner Safety Valve","public_title":null,"options":["Default Title"],"price":1799,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"00662766542974","requires_selling_plan":false,"selling_plan_allocations":[]}]

By isolating burner fuel pumps from supply line pressure sources a supply pump or overhead tank, the osv relieves ores sure strain on fuel pump inlets and seals and prevents tank siphoning and spilling caused by accidental line breaks

R.W. Beckett’s burner controls were created with customer satisfaction and safety in mind. Our entire suite of burner controls utilizes the most current technology to safely control the combustion process.

Available in both AC and DC voltages for off-grid applications, our controls are suitable for a multitude of needs. Our new GeniSys® model 7565 Advanced Burner Control is compatible with the myTechnician™ app for modernized accessibility. The app assists with diagnostics, troubleshooting, and more. With applicable uses of our controls ranging from residential homes to commercial buildings, to process applications R.W. Beckett can meet your demands. Our multitude of models offer both fixed and programmable options and serve as a direct replacement for many competitive combustion controls.

Fusible valves are approved for kerosene and No. 2 fuel oil. Pressure rated for 10 P.S.I. Valves with standard hand wheel close at about 165 deg. F. ambient temperature. Double seal to prevent stem leaks. All fusible valve rubber washers and o-rings are made of Viton or equivalent material. 3/8" F.

Fusible valves are approved for kerosene and No. 2 fuel oil. Pressure rated for 10 P.S.I. Valves with standard hand wheel close at about 165 deg. F. ambient temperature. Double seal to prevent stem leaks. All fusible valve rubber washers and o-rings are made of Viton or equivalent material. 3/8" x 1/4".

Our fire safety valves are designed to close off the oil supply to the burner in the event of a fire. The range includes the notable Teddington KBB brand of fire valve, as well as more economy models that are available depending upon your preference. Take a look at our fire valve testing unit, it’s a must have piece of equipment for every