oil safety valve massachusetts pricelist

Under a new Massachusetts oil heating lawwhich went into effect on September 30, 2011, every homeowner with an oil heating system is required to install an oil safety valve or an oil supply line with protective sleeve in their system. The cost is approximately $150 to $350 depending on the system. The required upgrade is to prevent leaks from tanks and pipes that connect to your furnace. The upgrade will reduce the risk of an oil leak so by making a relatively small expenditure now, you can prevent a much greater expense in the future.

Owners of 1- to 4-unit residences that are heated with oil must already have or install an oil safety valve or an oil supply line with a protective sleeve. Installation of these devices must be performed by a licensed oil burner technician. Technicians are employed by companies that deliver home heating oil or are self-employed. It is important to note that heating oil systems installed on or after January 1, 1990 most likely are already in compliance because state fire codes implemented these requirements on new installations at that time.

those changes are in compliance with the oil burning equipment regulations; a copy of the oil burner permit from the local fire department may be used to demonstrate compliance.

Not only is complying with the new law required, it makes good financial and environmental sense. Homeowners who take these preventive measures can avoid the disruption and expense that can be caused by heating oil leaks. A leak may result in exposure to petroleum vapors in your home. If the leak reaches the soil or groundwater beneath your house, then a cleanup must be performed to restore your property to state environmental standards. Such a leak can cost many thousands to clean up. Leaks that affect another property or impact drinking water supply wells can complicate the cleanup and increase the expense. Each year, several hundred Massachusetts families experience some kind of leak.

The typical cost of installing either an oil safety valve or oil supply line with a protective sleeve ranges from $150 – $350 (including labor, parts, and local permit fees).

Perfect for homes with new boilers, this plan covers any service that may be required due to mechanical failure of essential components of the heating system and domestic water piping within a few feet of the boiler. Annual tune-up, service calls during normal business hours and even one emergency after-hours call are included. NOTE: We do not recommend this plan for warm-air furnaces.

The “A”stands for “annual tune-up.” This annual service plan covers the oil burning and safety components of your system and includes periodic or annual maintenance and repairs to the covered parts during regular business hours.

This plan is for customers who wish to have a fixed price for oil and a convenient monthly payment. Our installment plan permits the customer to make 10 consecutive monthly payments beginning on September 1. Any excess consumption over the enrolled gallons is billed at Cleghorn’s market price on the date of delivery. The price for this plan is based upon 2019-2020 futures prices. This plan is also eligible for Downside Price Protection.

Thanks so much for delivering our first batch of oil on Friday-- that was fast! The last oil company we had told us that the gauge on our tank was broken, and when we knocked on the tank, it sounded empty, so we thought it was going to be able to take at least 125 gallons -- especially since the last time we filled up was in the spring.

Your oil storage tank gives you a level of security that you don’t get with other fuels. Just as a full pantry or gas tank lets you go about your business without worry, a full storage tank means you don’t have to worry about heat or hot water in your Massachusetts home. Last month we reviewed the scientific reasons tokeep the tank full over the spring and summer; now, let’s look at tank safety. Continue reading this blog post to learn everything you need to know about keeping your oil tank safe.

The chance of a release from your oil storage tank is very low. In fact, most indoor, aboveground tanks can have life spans of 20 years or more – but if your tank is located outside and unprotected from the elements or buried underground, it can deteriorate sooner. In addition, factors such as the thickness and type of material used to fabricate the tank, the quality of the installation, and the condition and maintenance history of your heating system can further affect the tank. With so many variables, you must know the signs of a tank leak and how to perform spot inspections of the tank and surrounding area.

Aboveground tanks typically store 275 gallons of oil. Underground tanks for a home will hold 290 or 500 gallons. As rare as releases are, it is even more rare for a release to occur with a gush of hundreds of gallons of oil. Most releases will be small but can build over time. Any sign of a release should be reported to your fuel company immediately, so they can implement appropriate clean-up procedures and notifications. Above all else, always consult a professional at the first sign of a leak.

While you can’t visually inspect an underground tank, there are safe and accurate testing procedures to confirm the soundness of the tanks. Get in touch with your tank provider for more information about how they can further inspect your underground tank. In addition, homeowners should be on the lookout for dead vegetation above the tank site. Any signs of oil – odors, sheens on water, visible puddles of oil – should be reported to PayLess as soon as possible.

Homeowners can take additional precautions to protect their storage tanks and their property. New aboveground tanks can have “double-wall” designs that will contain any leaks from the inner tank within the outer wall. There are also trays and pans for under the tank or full enclosures, which will protect the tank from the elements as well as contain any releases. Some companies also offer tank protection insurance plans to offset or cover the cost of a clean-up and/or tank replacement. With proper care and regular inspections, your oil storage tank can give you years of safe, reliable, and worry-free use.

The Pierce family lived in Medford MA. Like many residents of this area, they used heating oil as their source for heat. Their heating oil tank was located in their basement and they had used it for many years. They knew that it was approaching the end of its lifespan. After coming home from work one day, they noticed that their tank had a leak underneath it. They called Townsend Energy immediately.

We dispatched Jeff Sartorelli, one of our seasoned technicians, to their home. He inspected their tank and verified that it had a slow leak. Since the tank was well over 30 years old, he recommended a Roth oil tank replacement for their Medford MA home.

Solution: Townsend Energy removed their outdated oil tank and replaced it with a 275-gallon double wall Roth oil tank. Their new Roth tank was installed a few feet more to the right of the existing tank, opening up space to access their water shut off valve.

Regular tank inspections are a great way to prevent any major issues from happening in your home or property. Because the Pierce family wanted to replace their leaking tank with one that they could depend on, we recommended a Roth oil tank installation for their home.

Our customers can now experience the many benefits that come with investing in a Roth oil tank. All heating experts agree that the Roth brand name is known for producing some of the best fuel oil tanks on the market. They use state of the art technology, ensuring a long and reliable lifespan. The Pierce family can count on their new system for many years to come. Other advantages include:

As you can see from all of the advantages that this tank offers, the Pierce family is very happy with their decision. They can rely on this tank’s performance and safety features for many years ahead. If you would like to schedule a free estimate about an oil tank upgrade or if you have questions about any of our home comfort services, call the experts at Townsend Energy today.

One of the most common questions that our customers ask us relates to the heating oil tank on their property. You should always be aware of your oil tank’s age and condition. For example, new homeowners should ask about the oil tank before purchasing a home. You don’t want to buy a home and then find out that the tank is 30 years old and requires an oil tank replacement.

On average, an oil tank lasts between 15-30 years. However, to be on the safe side, some insurance companies and localities require a replacement between the 15-20 year mark. Your oil tank’s lifespan will depend on the care it receives. An oil tank can last much longer when you properly care for it. When it comes to oil tanks, however, it is best to err on the side of caution. After all, a small oil leak can escalate very quickly and this is not an issue that you want to deal with. Oil leaks can be time-consuming, inconvenient, and very costly to deal with.

It is almost impossible to know whether or not your tank requires an upgrade. Some tanks may look like they’re in good condition from the outside while they are full of rust on the inside. This is why it is worth calling out a professional for an oil tank inspection. They can perform a complete assessment of your tank and inform you of what to expect. It is always a good idea to perform period checks yourself as well. However, you should certainly call for a professional examination of your tank once a year and certainly when it reaches the 15-year mark. Annual inspections are highly recommended for both new and old tanks.

Unstable Or Wobbly Legs: Some oil tanks fail earlier than other tanks because of improper installation. If your oil tank legs seem unstable, you’ll need to call an expert. This is especially true in areas that experience snowfall and ice.

Vent Alarm: You should always make sure that your oil tank has a vent alarm that is properly working. If the vent alarm is missing or does not whistle when your tank is being filled, then you will need to have this repaired.

Fuel Gauge: Make sure that your fuel gauge isn’t cracked, damaged, or frozen. If you observe any oil around the gauge, this could be a sign of other issues that you will need to address. Are the oil lines that run from the heater to the tank, encased with a protective coating? If your fuel lines are under concrete or above ground, they should have a protective coating on them as well.

Oil Use: If you are using more oil than what you consider to be normal, then call Townsend Energy immediately. One of our professionals will need to inspect your tank to find the cause.

If you’re in need of an oil tank replacement or any other type of HVAC service in Medford Massachusetts or the neighboring area, call the experts at Townsend Energy today!

Be sure to check out our fuel oil deliveries. We offer high-quality fuel and the lowest heating oil prices in the area. Townsend Energy has many different oil delivery plans and financing options to choose from. This way, you can customize your oil deliveries to meet your particular needs. Call us today to see what Townsend Energy can do for you!

Found a leak in my oil tank. Contacted Townsend and after that I was breathing easier. From removal to instillation everything went smooth. Never had a single day without heat or hot water! And having Townsend’s tank policy saved me $2000!

Jeff Sartorelli was my contact person for my new oil tank. Jeff is a consummate professional: honest, polite and extremely articulate! The four-man crew who swapped out the oil tanks was also highly professional, efficient and very neat. I would recommend Townsend and their people very enthusiastically!