mil w 83420 wire rope in stock

SwageRight™ creates quality stainless steel wire rope in a 7x7 diameter that is best suited for rigging, lifting, towing, and heavy construction applications. This steel wire rope is also complaint to stringent MIL-SPEC MIL-DTL 83420 standards.

SwageRight™ creates quality galvanized stainless steel wire rope in a 7x19 diameter that is best suited for rigging, lifting, towing, and heavy construction applications. Galvanization is ideal for heavy-duty applications and offers greater protection against deformation and wear. This galvanized steel wire rope is also complaint to stringent MIL-SPEC MIL-DTL 83420 standards. SKUDiameterWLLBreak Strength W-21-104MS 1/8" 400 lbs 2,000 lbs

Budget Code9General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.

Price ValidationNThe current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.

Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.

Continental Cable manufactures its cable and wire rope products to exceed expectations and meet all industry use challenges without compromise. We manufacture wire rope to commercial, federal, and military specifications in sizes ranging from 3/64” to 5/8”.

Our stranding department produces wire rope in a wide range of constructions and with a variety of steel materials. Continental Cable also offers a wide selection of domestic and imported wire rope.

-Select-AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijan RepublicBahamasBahrainBangladeshBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia and HerzegovinaBotswanaBrazilBritish Virgin IslandsBrunei DarussalamBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape Verde IslandsCayman IslandsCentral African RepublicChadChileChinaColombiaComorosCongo, Democratic Republic of theCongo, Republic of theCook IslandsCosta RicaCroatia, Republic ofCyprusCzech RepublicCôte d"Ivoire (Ivory Coast)DenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland Islands (Islas Malvinas)FijiFinlandFranceGabon RepublicGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHondurasHong KongHungaryIcelandIndiaIndonesiaIraqIrelandIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKorea, SouthKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueNamibiaNauruNepalNetherlandsNetherlands AntillesNew ZealandNicaraguaNigerNigeriaNiueNorwayOmanPakistanPalauPanamaPapua New GuineaParaguayPeruPhilippinesPolandPortugalPuerto RicoQatarRomaniaRwandaSaint HelenaSaint Kitts-NevisSaint LuciaSaint Pierre and MiquelonSaint Vincent and the GrenadinesSan MarinoSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSpainSri LankaSurinameSwazilandSwedenSwitzerlandTaiwanTajikistanTanzaniaThailandTogoTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUgandaUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVatican City StateVietnamVirgin Islands (U.S.)Wallis and FutunaWestern SaharaWestern SamoaYemenZambiaZimbabwe

A Russian Mi-17 helicopter flies by soldiers and military vehicles during a joint Russian-Turkish patrol near the Turkish-Syrian border Dec. 7, 2020. (Delil Souleiman/AFP via Getty Images)

A Royal Australian Air Force E-7 Wedgetail participating in the Black Flag test event takes off from Nellis Air Force Base, Nevada, May 11, 2021. (Airman Trevor Bell/ U.S. Air Force)

Wire rope is commonly comprised of wire strands that form a helix pattern. Especially dependable, wire rope is perfect for marine environments since its elasticity and length stay consistent in either wet or dry conditions. US Rigging offers many varieties of stainless or carbon steel wire rope including coated, non-coated, galvanized and those meeting military specifications in your choice of the 1x19, 7x7 or 7x19 class. US Rigging is pleased to be a leading wire rope distributor and wire rope supplier in the US. You can rely on US Rigging as your premier wire rope supplier as we offer professional recommendations from our sales team, competitive pricing, and quality wire rope. **Despite being exceptionally strong, wire rope may become damaged with improper use, making it unsafe. Please examine your wire rope for damaged or deteriorating wire. *WLL is approximately 20% of average break strength which allows a 5:1 design factor.

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

All Military Specification callouts have different meanings worth noting when buying Wire Rope, Cable, and Strand. Knowing the difference between the various callouts ensures you choose the right product for your applications. While some companies have limited types of Mil-Spec products, Strand Core has a wide range available. Strand Core sells five different Mil-Spec products:Mil-DTL-83420,MIL-DTL-87161,MIL-DTL-18375,MIL-DTL-83140, andMil-W-18242B. All five specifications are approved for use by all Departments and Agencies of the Department of Defense. Continue reading to learn more about each of these Military Specifications.

This specification explains the requirements for flexible wire rope designed for aircraft control. MIL-DTL-83420 covers requirements of carbon steel and corrosion-resistant steel for the flexible wire rope.

There are two types of wire rope that MIL-DTL-83420 includes: Type I (Non-jacketed Wire Rope) and Type II (Jacketed Wire Rope). Type I can operate within a -65 Degree F to +250 Degree F temperature range in dust, fuel, wind, and oil spills, in wash-down, and other environmental stresses and aircraft experiences. Type II can perform to the same operations, but with a jacket attached to the wire rope.

In terms of compositions, there are specific guidelines for all materials that can be read about on pages 4 & 5 of our Mil-DTL-83420 guide here. The key takeaway is that there are two different Compositions for MIL-DTL-83420: Composition A (made with Carbon steel, zinc, or tin over zinc-coated) and Composition B (corrosion-resistant steel).

This specification explains the requirements of non-flexible wire rope used in aircraft applications. MIL-DTL-87161 covers the requirements for carbon steel and corrosion-resistant steel for wire strand used in aircraft applications.

The two types of wire strand within this specification are Type I (non-flexible, 1x7 class) and Type II (non-flexible, 1x19 class). Both types have two Constructions, one for Right Lay and the second for Left Lay. Both types must perform to specified levels for breaking strength, stretch limits, ductility of steel, test load, and coating adherences.There are two composition types of the wire rope. Composition A is made of carbon steel that is zinc coated. Composition B is made of corrosion-resistant steel.More information of Type I and Type II MIL-DTL-87161 can be found on pages 4 & 5 of our guidehere.

This specification covers the requirements for corrosion-resistant, nonmagnetic steel wire rope used in aircraft flight controls. The wire rope can operate within a -65 Degree F to +250 Degree F temperature range in dust, fuel, wind, and oil spills, in wash-down, and other environmental stresses and aircraft experiences.

For material, corrosion-resistant steel that is in accordance with SAE HS-1086 must be used. Each wire of the wire rope must be coated with a friction-preventing, non-corrosive lubricant. All MIL-DTL-18375 wire rope must meet the breaking strength, endurance, stretch limits, ductility of steel, test load, magnetic permeability and operating temperature range that has been provided. More information can be found on page 4 of our MIL-DTL-18375 wire rope guide.

This specification covers the requirements for rotation-resistant preformed stainless steel wire rope intended for aircraft rescue hoists, utility, retrieval hoists, and winching applications.

The preformed stainless steel wire rope is available in two types. Type I is a rotation-resistant 19x7 construction that is used for hoisting (vertical) operations. Type II is a rotation-resistant 10x7 construction (7x19 IWRC) used for winching (vertical, horizontal, or at-angle) operations. Similar to other Mil-Spec products, packaging, testing and certain performance levels must be met.

The critical takeaway to understand about Mil-Spec products is they are designed with specific applications in mind and have strict rules for materials, sizes, performance, and packaging. Due to the guidelines for each of the Mil-Spec products being particular, buying Mil-Spec guarantees strength, durability, and a high-quality product that has been manufactured to the optimal level.

If you are interested in learning more about the Mil-Spec products sold at Strand Core, please visit our website here. If you want to learn more about the various specifications that our Strand, Wire Rope, and Cable products are manufactured to, check out our Specifications webpage. If you have any questions, our team is happy to help! Reach out to us by email through sales@strandcore.comor by phone at 800-983-9926.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Type 302/304 stainless steel is the standard alloy for use in wire rope and cable. It has about the same strength as galvanized rope or cable but is much more corrosion resistant. It can be used in most industrial atmospheres and has acceptable corrosion resistance when used in marine- and salt water.

Type 316 stainless steel is the standard high corrosion resistant steel for rope and cable. It is resistant to many chemicals in the pulp and paper, photographic, food processing and textile industries. It has the best pitting resistance in marine and salt water and can be used in temperatures up to 480°C (900°F).