neon wire rope manufacturer

Flexible Neon Wire (Electroluminescent wire,cool Lighting,EL wire, glow stick rope) made in KPT company . It can be used for Christmas Lighting,DIY Glow toys,Glow flower, Flash…

electroluminescent wire waterproof cuttable 1 year warranty el wire Electroluminescence (EL) is an optical phenomenon and electrical phenomenon in which a material emits light in response to the passage of an electric current or to a strong electric field. It is a updated and safe light resource, widely used for indoor&outdoor advertising in nowadays especially for china,South Africa,Korea,USA,Mexico,Japan,and other European countries. electroluminescent wire waterproof cuttable 1 year warranty el wireelectroluminescent wire waterproof cuttable 1 year warranty el wire

Note: You may have opted for Chasing EL Wire instead of the standard solid colors. That"s fine. This tutorial will focus on both kinds of EL Wire and how to use each. We"ll discuss this in detail a little later.

Take the battery cover off by sliding in the direction indicated on the pack. Place your two AA batteries in the battery pack inverter, and put the cover back on. Plug in the male JST connector from your EL wire into one of the two female JST connectors on the inverter battery pack. Make sure there is a solid connection between the two.

Press the button on the case and your EL wire should illuminate. Press it again for a slow blinking effect, and press it once more for a fast blink. This inverter pack allows you to connect two EL products of your choice at a time. You can mix and match colors as well as shapes. You could have a red panel with blue wire, green tape with a pink wire, or two yellow and purple wires. The possibilities are endless!

We also have a 3V inverter. The wires are terminated at the end with JST PH connectors. These require a little bit more work to get started since they are designed to plug directly into our EL Escudo Dos or EL Sequencer. They are ideal for small EL displays.

This particular EL inverter accepts an input (on the red/black pair of wires for +Vcc and GND, respectively) anywhere from 2.5V-4.2V, so you can use them with batteries. Once powered, it can output up to 110VAC (on the black/black pair of wires) to drive EL wire.

With the 3V inverter, you can drive EL wires directly without using an EL Escudo Dos or EL Sequencer. However, you may need to re-terminate them, make an adapter, or possibly regulate the voltage down from your power supply. Below is a simple connection if you are just powering one strand for an installation using a 5V USB power supply, 3.3V FTDI to regulate the voltage down, M/M jumper wires, and one strand EL wire. The pins of the jumpers are small enough to be inserted into a JST connector.

You can even connect two strands together by making a parallel connection. For testing purposes, the circuit was placed on a breadboard. It should not matter what color of wire is connecting on the inverter"s output since it is AC. The wire colors were connected together for consistency.

Tests with Different Lengths of EL Wire: Some real world testing revealed that this inverter can easily drive a 3m length of EL wire. When adding a second 3m length, the two get a bit dimmer, but still close to full brightness. At three 3m lengths, you can only tell all three wires are on if the room is dark. While the inverter can light up 4 strands, they are barely visible in normal light and very dim in the dark as well.

As you can see from the images below, connecting more EL wire in parallel with the 3V inverter will cause both EL wires to dim. The brightness can depend on the length of EL you are using, how you are wiring the EL, and the type of inverter.

When you are done testing and integrating the EL wire in a project, make sure to seal any exposed EL wire or connections on the AC side. Electrical tape is a good option to secure the connection and insulate any exposed pins should you decide to continue using M/M jumper wire between an inverter and EL wire.

When using several strands of EL, you may want to consider using the 12V inverter. The inverter consists of a barrel jack connector and a pair of wires terminated with a JST PH connector. These are ideal for the biggest, brightest display possible!

This particular EL inverter accepts an input via the 5.5mm x 2.1mm barrel jack connector. Simply connect a power source with a center positive barrel jack connector. The output (red/black pair or wires) was designed to connect to a mating JST connector on the EL Escudo Dos or EL Sequencer board. There is also a small switch on the side which allows you to switch between "on", "blink", and "off" settings.

As with the 3V inverter, you can drive EL wires with the 12V inverter directly. However, you may need to re-terminate them or make an adapter. Below is a simple connection if you are just powering one strand for an installation using a 12V power supply, M/M jumper wires, and one strand EL wire.

Again, you can connect two strands together by making a parallel connection. For testing purposes, the circuit was placed on a breadboard. It should not matter what color of wire is connecting on the inverter"s output since it is AC. The wire colors were connected together for consistency.

Stress Tests with the 12V Inverter: The 12V inverter has been tested to run 8x strands of 3m EL wire using an EL Sequencer and a 12V power supply. Remember, as you increase the length or wire more in parallel, this will increase the load on the inverter causing the EL to dim.

When it comes to delivering the most innovative and cutting-edge lighting, Ellumiglow is the consistent choice for designers, retailers, stage performances, events, safety and wearables. Laser wire™ cable, a brand new technology in the lighting industry, is the perfect next generation to the ever-popular EL Wire, or E-wire lights, due to the increased brightness, massive flexibility increase, ability to integrate lightweight and long lasting materials, and low cost of ownership. In fact, Laser Wire when compared to any other linear accent lighting, including EL Wire, EL Tape, LED Tape, Plastic Optical Fiber (POF) or Neon, Laser Wire is anywhere between 1/4th to 1/100th the cost.

Ellumiglow spends a great deal of effort on research and development to provide the best in LED glow wire like the EL light tape, as well as Laser Wire, e-wire lights and el wire clothing. Designers and Engineers love working with Ellumiglow, as we have artists, software and hardware engineers, and all around lighting enthusiasts on staff to help work through projects both big and small. Our custom division takes on projects ranging from personal parties and displays to major entertainment events throughout the world, like EDC, Tomorrowland, Ultra, and more. Futures Divisions and Prototyping shops love working with our products as we are able to design custom inverters, laser modules and lighting elements rapidly in our shop, and we dedicate one person on our team to help throughout the journey of the project until completion. Fast is great, but what happens when you need production volumes of Lasers, VynEL™ or EL Inverters? Our overseas facilities in China and Taiwan can accommodate millions of products and keep even the largest jobs on track and on budget.

You"ll find a variety of e-wire lights that have been the most reliable, high quality, and brightest products in the industry, and each one passes rigorous testing before it leaves our Portland, Oregon facility.  We take pride in the products we sell and as such, many of our products glow brighter, make your products last longer, and are safer to use than the competition.  We know that special events have one shot to make a lasting impression, and low grade products that are proven to be unreliable are not sold at our store. We want our customers to have peace of mind while shopping at Ellumiglow, knowing their Laser Wire® cable and LED glow wire needs are met with reliability and ease

BC Wire Rope & Rigging is a full service provider of wire rope, slings, chain, hoists, and rigging equipment. BC Wire Rope has served the heavy lifting needs of customers throughout Los Angeles, San Diego, Las Vegas, Tucson and the Western United States since 1974. Specializing in lifting products ranging from fall protection to synthetic slings, BC Wire Rope & Rigging carries products from the industry’s most reputable vendors including Crosby, Slingmax, Campbell, and Bridon American. With ample testing and manufacturing capabilities, BC Wire Rope is also the manufacturer of KWIK synthetic slings.

BC Wire Rope was onsite as the last steel beam was raised by Schuff Steel at the new, future home of the Los Angeles Rams and LA Chargers at SofFi Stadium in Inglewood, California. The raising of the last beam is marked by the raising of a ceremonial Christmas Tree, […]

Established nearly 40 years ago in Southern California, BC Wire Rope now manufacturers and distributes wire rope from 5 locations to strategically serve customers across the West Coast. Headquartered in a 35,000 square foot warehouse and manufacturing facility in Anaheim, BC Wire Rope is the premier provider of rigging throughout the greater Orange County and Los Angeles area and also has branches in Tucson, Las Vegas, San Diego, and Elko. These locations allows BC to stock a full inventory of specialty lifting products and enables BC to efficiently meet a wide range of manufacturing needs.

Full in-house testing and wire rope manufacturing capabilities help ensure that BC Wire Rope can meet or exceed its customers’ needs. BC Wire Rope can press wire rope slings and swaged boom pendants, splice slings and soft rope, and can fabricate special end fittings. BC also manufacturers its own line of synthetic slings through its KWIK Products division. KWIK Products include nylon eye & eye endless flat slings, high performance fiber slings, polyester round slings, and choker and basket hardware slings. BC Wire Rope also provides customers with proof testing through use of its 4 test beds that can test slings, blocks, and hardware with up to 1 million pounds of force.

BC Wire Rope & Rigging’s unrelenting focus on customer service and industry leading products is evidenced by its ‘Quality – No Compromise’ motto. BC Wire Rope has been a proud member of the wire rope industry’s trade association—Associated Wire Rope Fabricators (AWRF)—for over 35 years. The commitment to longstanding industry relationships is also demonstrated by the fact the more than half of BC Wire Rope’s employees have remained with the company for over 18 years.

With years of industry knowledge and a full product inventory, chances are that BC Wire can meet your lifting needs. Contact the specialists at BC Wire Rope today to find out more about what BC Wire Rope can do for you.

Wirerope Works, Inc. manufactures Bethlehem Wire Rope®, the trade name under which we produce, sell and service our wire rope and strand products. The name "Bethlehem Wire Rope" represents the most complete facility and experienced personnel in North America. Our 46-acre manufacturing complex in Williamsport, Pennsylvania, with over 620,000 square feet under roof, is the single largest wire rope manufacturing facility in North America. Wirerope Works, Inc. manufactures its own wire, wire rope, structural strand, and all fabricated products such as pendants and other assemblies on the same premises.

Bethlehem brand wire rope and strand products have long been recognized worldwide for superior quality. Used for both lifting and stabilizing, Bethlehem Wire Rope products are used in a wide variety of applications ranging from crane and elevator hoist ropes to bridge suspension and anchoring offshore platforms. Wirerope Works, Inc. serves many industries including construction, logging, marine, mining, oil and gas, and steel.