overhead crane wire rope lubricant for sale

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Typical Applications: Mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; as a rust preventative for any metal in harsh environments and for metal parts in long-term storage.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Typical Applications: Mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Whether you are looking for waterproof salon capes, salon chemical capes, ordinary hair cutting capes, or even special salon gowns such as customised barber capes, you can likely find them on Alibaba.com! Look out for amazing deals for these haircut hair catches and barber gowns and sell them to the many salons in the market! The beauty industry is constantly growing, and even in the worst of economic times, simple beauty tools, cosmetics, and treatments have continued to retain their market size and even growth. The lucrative market draws many barber and hairdresser salons to open at any one time, and you can in turn cater to this market with wholesale equipment and simple wares such as crane wire rope lubrication!

If you want to gain a competitive edge, you can even sell cute salon capes or cool barber capes with different colours or logo and design customisations. Some wholesalers that are also OEM manufacturers will allow you to do simple printing and customisations. This is especially if you order in large bulk quantities. You can also cater to the upmarket salons with high end salon capes that may be more sleek, made of more durable or slightly better materials. Look out for these crane wire rope lubrication wholesale or discuss with suppliers when making your purchases to check!

There are two main methods of wire rope lubricant, oil and grease. Regular maintenance tasks should include lubricating your wire rope. Both oils and grease work in the essential task of lubricating wire rope. This is necessary for corrosion resistance and preventing damaging friction which causes excess “wear and tear”.

The product we recommend is this spray lubricant which can be used on wire rope as well as chains. Applying this wire rope lubricant on a regular basis will greatly extend the working life of your wire ropes. The lubricant penetrates deep into the wires for lasting lubrication. Corrosion protection comes from the thin film left on the rope’s surface. The brown foaming spray is resistant to fling off and highly resistant to washing off. This can be extremely beneficial if used outdoors or in damp environments.

If you need help in advice on how to use lubricant with wire rope then call us on 01384 78004. One of our experts will be able to advise and also take your order.

During the manufacturing process of wire rope many different chemicals are used. Purposefully for keeping the rope well lubricated and also corrosion inhibitors etc. Many wire ropes will have oil, wax, bitumen, resin, gelling agent, corrosion inhibitors and other chemicals present. It is for this reason that care must be taken. Whether handling or working with wire rope to minimize potential problems.

At normal temperatures most of these chemicals will produce minimal hazards. However working with heated rope can cause extra hazards. The minor hazards are usually skin irritations. But this can be easily minimised by wearing the correct protective clothing whilst handling the wire rope. In particular oil impermeable gloves and aprons; good hand washing after handling will also help.

When working with heated rope fumes given off from the heated lubricants can cause quite nasty problems. Heated lubricants which come into contact with the skin can cause severe skin burns. Prolonged or repeated usage may cause longer term skin disorders such as dermatitis.

Inhaling fumes from lubricants that have been subject to heat can cause dizziness, headaches or irritation of the respiratory tract. For these reason concentrations of oil mists, vapours and fumes must be kept as low as possible. Eye contact may also produce mild irritation to some users.

In conclusion the main area of hazard is through inhalation fumes generated by heat, e.g. where disc cutters are used. So always handle rope in a well ventilated area, especially when cutting, and always wear the correct protective clothing.

Ensure they are properly lubricated and contact us to assist with your next maintenance interval on Syncrolifts, ROV Umbilicals, Cranes, Bridges, Hoists, Dams, ski-lifts...and more.

We offer both standard and customized solutions for Wire Rope Lubricant to Cranes, Offshore, Onshore, Oil & Gas, Marine, Port, Ship Management, Construction, Transportation, Steel, Industrial and EPC Contractors. We are serving Worldwide Clients based in Dubai, United Arab Emirates UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Iraq, Kurdistan, Yemen, Lebanon, Jordan, Sudan, Egypt, Nigeria, Algeria, Angola, Kenya, Tanzania, South Africa, Morocco, Libya, Kazakhstan, Armenia, Azerbaijan, Turkmenistan, Tunisia, Ghana, Tanzania, Uzbekistan. We are Looking forward to fulfilling your expectations with the best of our product range. Our Excellent Logistics setup supports shipping of goods to major Cities Such As Dubai, Abu Dhabi, Al Ain, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Doha, Muscat, Kuwait, Riyadh, Jeddah, Dhahran, Jubail And Yanbu, Baghdad, Basra, Mosul, Erbil, Sulaymaniyah, Manama, Beirut, Amman, Sanaa, Aden, Mukalla, Khartoum, Abuja, Algiers, Luanda, Nairobi, Dar es salaam, cape town, Durban, Johannesburg, Rabat, Tripoli, Benghazi, Misrata, Ashgabat, Almaty, Aktau, Yerevan, Baku, Accra, Lagos, Port Harcourt, Port Sudan, Tunis, Port of Mombasa, Dodoma, Dar Es Salaam, Aktobe, Tashkent, Balkanabat, Turkmenbashi, Kirkuk. We will be pleased to serve your requirements with the best of our products.

At Northern Strands we know first-hand the importance of wire rope lubrication. It is required during manufacturing, installation, and ongoing maintenance. Different hoists and applications require different types of lubrication. We carry everything from basic asphalt lube to soap grease and no- petroleum based lubes. With Northern Strands’ knowledge of wire rope, we can recommend and supply appropriate lubrication products and suggest the best lubrication methods.

CoreLube Equipment"s Helix Groove Cleaners are designed to remove contaminants from the valleys between the strands of wire rope. The cleaner works by rotating with the helical lay of the wire rope. The Helix Groove Cleaners are designed to work with CoreLubes applicator collars or thrust block.

Proper lubrication of wire rope, or steel cable, is essential for two reasons. The first one is safety. Wire ropes that are improperly lubricated are far more prone to both interior and exterior wear, and as such are at greater risk for failing. A wire rope that breaks while being used can cause great injury or death, since they are often a critical piece in hoisting, towing, dragging, braking, or similar operations.

The second reason is simple economics. A wire rope that is well maintained and lubricated will last far longer than one that isn"t. Life of a wire rope can be extended several times if properly lubricated.

Wire rope bending around hoist drums and sheaves will wear like any other piece of metal, so you should lubricate wire rope the same as any other piece of working machinery. Wires and strands of a rope must be able to move freely in order for the rope to function correctly. Corrosion from moisture or wear due to friction shortens the service life of wire rope.

Wire rope should always be well cleaned before lubricating. Scraping, steaming, or high-pressure washing may remove most of the dirt and grit that has accumulated on used wire rope. Rust should be removed on a regular basis with a wire brush. The purpose of cleaning is to remove all foreign material and old lubricant from the valleys between the strands, as well as the spaces between the outer wires. Otherwise, new lubricant will not be able to flow into the rope.

Of the two, corrosion is more dangerous than wear because corrosion ruins the interior of a rope. This is very difficult to determine by visual inspection.

Wire rope should be inspected at regular intervals. How often these inspections take place depend on the frequency of rope use and the conditions under which it is used.

Abrasion or reverse and sharp bends cause individual wires to break and bend back. These breaks are known as fishhooks. Wire rope should be examined carefully for fishhooks, kinks, and worn and corroded spots. Breaks in individual wires will usually occur in areas where the wire runs continually over the sheaves or bend onto the drum. This is also a good place to look for problems, because the strands may separate slightly as the rope passes over, thus allowing slightly better examination.

There are two conditions that will usually reduce the diameter of a wire rope: Overloading, and failure to lubricate. Rope that is 75 percent of its original diameter should be removed from service. When pitting and corrosion of the wires are visible on the surface, you should assume that the same problem exists internally, and the rope should be removed from service.

Special care should be taken to examine the valleys and small spaces between the strands for rust and corrosion. Since corrosion is normally caused by insufficient or nonexistent lubrication, if you see external corrosion, assume that the internal wires of the rope are being damaged by extreme friction and wear at the same time. This type of internal and often invisible destruction of the wires is one of the most frequent causes of unexpected and sudden wire rope failure. To prevent this, keep the rope well lubricated, and handle and store it properly.

Wire rope should never be stored in an area where acid is or has been kept. This must be stressed to all personnel. The slightest trace of acid or acid fumes coming in contact with wire rope will damage it at the contact spot. Wire that has given way has been found many times to be acid damaged.

It is extremely important that wire rope be cleaned and lubricated properly before placing it in storage. Fortunately, corrosion of wire rope can be virtually eliminated if lubricant is applied properly and sufficient protection from the weather is provided. Remember that rust, corrosion of wires, and deterioration of the fiber core will significantly reduce the strength of wire rope.

Fin Super with MicPol: Suitable for above-water applications. A spray lubricant that goes on wet and dries to a solid film that protects from wear and moisture. Also has outstanding penetrating and creeping abilities, so it can quickly work its way throughout a wire rope and lubricate both interior and exterior.

Grease OG with MicPol: A grease with excellent metal adhesion that strongly resists washout and can withstand a temperature range of -20 C to 120 C. Ideal for use on outdoor and underwater cables, as well as heavily loaded open drive mechanisms such as turntables on cranes, bridges, locks, etc. Can be used with pneumatic lubricant spraying system. Calcium lithium complex grease with a DN factor of 60,000.

Sheaves facilitate the smooth and safe operation of overhead crane hoists. Damaged sheaves can wear ropes prematurely and cause other dangerous hazards, such as binding wire rope. Konecranes technicians are trained to identify and correct problems with sheaves and other parts of hoisting equipment.

Sheaves carrying ropes which can be momentarily unloaded shall be provided with close-fitting guards or other suitable devices to guide the rope back into the groove when the load is applied again.

The sheaves in the bottom block shall be equipped with close-fitting guards that will prevent ropes from becoming fouled when the block is lying on the ground with ropes loose.

In using hoisting ropes, the crane manufacturer"s recommendation shall be followed. The rated load divided by the number of parts of rope shall not exceed 20 percent of the nominal breaking strength of the rope.

Rope clips attached with U-bolts shall have the U-bolts on the dead or short end of the rope. Spacing and number of all types of clips shall be in accordance with the clip manufacturer"s recommendation. Clips shall be drop-forged steel in all sizes manufactured commercially. When a newly installed rope has been in operation for an hour, all nuts on the clip bolts shall be retightened.

Wherever exposed to temperatures, at which fiber cores would be damaged, rope having an independent wirerope or wire-strand core, or other temperature-damage resistant core shall be used.

Replacement rope shall be the same size, grade, and construction as the original rope furnished by the crane manufacturer, unless otherwise recommended by a wire rope manufacturer due to actual working condition requirements.

Konecranes wire rope inspections can help crane users extend the life of hoist ropes. Ropes, sheaves and other reeving system components are inspected for compliance with crane standards, and to determine if they have flaws that could hinder safe operation. Contact us today to schedule an assessment.

Search from thousands of crane listings for new and used cranes updated daily from hundreds of dealers. Buy high quality used cranes from our network of worldwide locations for used cranes and quality lift equipment.