safety lifeline wire rope quotation

When it comes to any at-height industry, fall protection is an important part of the job. Not to mention you will probably spend some time in situations where tying off to an appropriate anchor can be difficult. That"s why having the best lifeline is important. Our gear experts have spent years sourcing the best lifeline rope available and our hand-picked selection will help you stay safe and get the job done. We feature a range of styles, colors, lengths, and sizes of rope. You can choose a rope from 300, 600, or 1,200 foot pre-cut lengths, or if you need a custom length rope - we’ve got you covered there too. Diameters include ?, 7/16, ?, and ½ inch options and come in a variety of styles including HTP static, 3-strand, and unicore. We’ve also got a range of colors so that each lifeline can be visibly different than the others for easy identification.

Most folks think lifelines when it comes to fall protection, but if you quiz them about how these systems work or when they are good fits for an application, they come up short. So what is a cable-based fall protection system, and what are the pros and cons of lifeline systems?

Cable fall protection systems take many names, including rat lines, HLL’s, and horizontal lifelines just to name a few. In their simplest form, cable fall protection systems consist of wire rope secured by a series of terminal and intermediate anchor points. By connecting a body harness and lanyard to a shuttle traveling the length of the line, a worker can safely move along a horizontal (or vertical) plane. Cable systems are deceptively simple in design, but done properly, they are actually highly engineered fall protection systems.

In a previous post titled “Is My Horizontal Lifeline Safe?”, we shared pictures of some home-made rat lines we have encountered in the field. Lifelines made from combinations of wire rope, wire rope clips, and turnbuckles may look safe, but these home-made solutions share little in common with the engineered lifelines we design and install at DFP.

With years of knowledge, our team can supply everything from wire rope through to individual and bespoke fittings used in these systems. Some of our main components are listed below:

M12 Thread with a swaging dimension of 12.5mm. This is smaller than the standard 16mm dimension usually associated with 8mm rope, which makes it popular among engineers swaging on site using an Electro/Hydraulic hand tool.

The wholesale rope lifeline are here to keep you and your customers safe in swimming pools as well as open waters. The variety of water safety gear available comes in different sizes, for adults as well as children. The quality super soft life vest sizes are designed to reduce chafing even with extended use. They are not bulky and will keep your children comfortable as they play in the water. The speedo infant life jacket vest is easy to put on an infant; it’s lightweight and bouncy and it helps keep any kid afloat. The speedo youth life jacket vest is a better fit for older kids and is designed to handle extra weight.

Not only does it act as a water life saving device, the swimming tow bag can be quite beneficial for individuals who need to carry some items with them when they are swimming. It has a small compartment that has enough space to fit your phone, keys, or a changing cloth. You can also find an assortment of open water swimming float bags to deal with any open waters. A safety buoy dry bag has two main purposes. It helps your customers swim. As fatigue sets in, it makes them much more visible which is fairly important especially during water sport events.

Water sports can be quite enjoyable but they can be risky at the same time. Help protect your customers against any mishaps with the variety of life saving equipment for water sports in our rope lifeline section.

Built-in, ergonomically-designed molded handle on the 50-ft (15m) and 65-ft. (20m) cable units provide support and leverage when attaching C3811 anchorage connector. Easier to install. Dual swivels D3814 (unit top and snap hook) included on all cable models to minimize lifeline from twisting during use

In these systems, a wire rope, generally containing an energy-absorbing shock absorber, is tensioned between two or more anchor posts. The line is equipped with pass-through brackets and shuttles, allowing the worker to traverse the system without having to disconnect and reconnect, allowing for 100% tie-off at all times. In the event of a fall, the combination of the in-line shock absorber, stretch of the cable, and lanyard or SRL protect the worker by slowing the speed of the stop, thereby minimizing the arresting forces on the body.

FallProof offers industry-specific, full-turnkey solutions that meet and/or exceed OSHA and ANSI standards. Our team provides design, engineering, fabrication, installation, certification and employee training to meet the needs of your elevated work environments. Although cable lifelines are less expensive and more widely used, they have the disadvantage of requiring a greater fall clearance when compared to a fixed or rigid track system. Accordingly, they are not suitable for all applications.

Call us today to discuss your specific location. We offer a free on-site assessment, and our experts can help you determine what is best for your needs. You also may contact us by email (feel free to upload drawings or other materials that will help us). All inquiries are held in strict confidence. Below are a few horizontal cable lifeline installations FallProof has completed for various clients.

Drexel University, Philadelphia, PA (13 Lifelines on three level roofs ranging from 40’ to 220’ lines) - This application allows contractors to be tied off before working on a gutter or HVAC main. The project was planned well in advance due to the need to weld the custom posts to the massive roof beams in specific locations.

Southeastern Pennsylvania Transportation Authority (SEPTA) Bus Transportation Garage, Philadelphia, PA – This application was a massive installation – approximately 600’ in total length providing protection in all 14 bus bays. FallProof had to install and complete one bay at a time, each of which took approximately three weeks to accomplish. Each bay now contains two lifelines, each rated for two users. Non-conductive cable was used.

Covanta Energy, Bainbridge, PA - FallProof installed fall arrest protection on a residue building in the form of a horizontal cable lifeline for workers who would need access to the roof. This included stainless steel components for harsh environments.

The Franklin Institute, Philadelphia, PA - FallProof installed a DBI/SALA Evolution horizontal lifeline on the 4th story of the Franklin Institute. It needed to be installed around the 4th floor balcony edge, requiring 50 separate anchor points drilled into imported marble and 50 inside/outside curves installed around the perimeter. The installation also needed to be coordinated with the multiple contractors who were performing on-going restoration work on the building. FallProof successfully completed the project on budget and ahead of schedule.

Established in the year 2018atMumbai, Maharashtra, We “Hindustan Wire Rope Industries” is a Sole Proprietorshipbased firm, engaged as the foremostManufacturerofFishing Wire Ropes, Rope Slings, etc. Our products are high in demand due to their premium quality, seamless finish, different patterns and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.

To start a return, you can contact us at info@coloradosafetysupply.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

To start a return, you can contact us at info@coloradosafetysupply.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Miller Falcon™ self-retracting lifelines are built with a high impact-resistant nylon housing that withstands the harsh rigors of the toughest applications, Pound for pound the strongest, most durable line of self-retracting lifelines on the market, Load indicator helps to identify when the unit needs to be removed from service, Dual swivel design (unit top and snap hook) to help prevent lifeline from twisting during use, Comes with a carabiner unit connector and double-Locking steel swivel snap hook lifeline connector,

* Must be used with Drop Forged Clamps in horizontal lifeline applications in accordance with system instructions and the judgment of a Qualified Person. (Clamps/swages sold separately)

As the name suggests, a Horizontal Lifeline system is designed to let you work high while being anchored horizontally between two anchors, rather than being stuck at one anchor point.

Horizontal Lifelines are used in many fall arrest or fall restraint systems due to their great flexibility. They can be used in areas lacking overhead anchorage points for personnel tie-off. The lifeline consists of a cable or rope that is attached to two or more anchor points on sites that poses a fall risk.

A horizontal lifeline can be used in combination with a personal fall arrest system to arrest a fall and limit the force transferred to the worker. A horizontal lifeline can also be used in combination with a body harness and lanyard to serve as a fall restraint system that limits a worker’s ability to reach a leading edge.

We carry a wide selection of Horizontal Lifelines in various sizes, lengths, and materials to cater to your specific needs. Whether for residential, commercial or any other purpose, we’ve got it. The DBI-SALA EZ Line Cable Retractable Horizontal Lifeline System is a favorite among the pros. This system is easy to install and 33% lighter than conventional systems, making it easy to transport. This unit provides hands-free horizontal mobility and continuous protection for two users per span, and up to six users per system.

Another popular option is the Miller Two Person TechLine Horizontal Lifeline System. This 60ft lifeline comes with all the bells and whistles like low-stretch fluorescent green rope for better performance, less deflection, and high visibility. It also has cross-arm anchorage straps for easy installation, plus a shock absorber to reduce fall arrest forces. A convenient adjuster allows you to accommodate your required length while keeping the lifeline secure.

Not what you need? Browse our impressive inventory of Horizontal Lifelines. Our wide selection from an extensive list of manufacturers including industry favorites like DBI-SALA, Miller by Honeywell and Guardian will accommodate all your horizontal lifeline needs. If for some reason you can’t find what you need on our site, we can get it!

Whether it is Horizontal Lifeline Systems or other valuable fall protection equipment, we have the sales team to get you what you need, whenever you need it. We have a massive selection of products, and we’re always available to help guide you through the process, so you have the most practical pieces of fall protection equipment for your needs.

Lifelines, safety belts, and lanyards shall be used only for employee safeguarding. Any lifeline, safety belt, or lanyard actually subjected to in-service loading, as distinguished from static load testing, shall be immediately removed from service and shall not be used again for employee safeguarding.

Lifelines shall be secured above the point of operation to an anchorage or structural member capable of supporting a minimum dead weight of 5,400 pounds.

Lifelines used on rock-scaling operations, or in areas where the lifeline may be subjected to cutting or abrasion, shall be a minimum of 7⁄8 -inch wire core manila rope. For all other lifeline applications, a minimum of 3⁄4 -inch manila or equivalent, with a minimum breaking strength of 5,000 pounds, shall be used.

Safety belt lanyard shall be a minimum of 1⁄2 -inch nylon, or equivalent, with a maximum length to provide for a fall of no greater than 6 feet. The rope shall have a nominal breaking strength of 5,400 pounds.

All safety belt and lanyard hardware shall be drop forged or pressed steel, cadmium plated in accordance with type 1, Class B plating specified in Federal Specification QQ-P-416. Surface shall be smooth and free of sharp edges.

All safety belt and lanyard hardware, except rivets, shall be capable of withstanding a tensile loading of 4,000 pounds without cracking, breaking, or taking a permanent deformation.