simplex wire rope clamp quotation

Simplex wire rope clip is one type of frequently used wire rope clamp. This wire rope clip has a simple design, but with strong and high corrosion resistance.  It can be perfect for making eye-loop connections or complete loops in wire rope clip cable, we also have duplex wire rope clip for your option.

Hilifting is a professional stainless steel wire rope clips manufacturer, our simplex stainless steel  wire rope clips is simply loop, the cable clamps each side of the threaded bolt and tighten down the plate using a suitable spanner, we also have duplex wire rope clip for your option.

Trinity International, Chennaiis a reputed manufacturer of Lifting and Material HandlingEquipment and Accessories. Range of products being offered by us includes Industrial Lifting Clamps, Industrial Hooks, Material Handling Equipment, Polyester Slings, Wire Rope & Wire Rope Slings, Chain Sling etc.

These clamps are used to make loops and releasable end connections on all kinds of ropes (wire, textile, hemp, etc.), which can then be used for mounting and hanging purposes. To do this, one end of the rope needs to be bent around and the clamp placed over the doubled-up rope at the bottom end of the loop and screwed tight. No exact information can be given as to the stability of such a clamp connection but it can be noted that the stability of a DUPLEX CLAMP, which works on the same principle but with twice as much area being clamped, is definitely (and naturally) higher.

When making a loop, especially in the case of a wire rope, the curve should be kept to a minimum in order to avoid crimping the rope and permanently damaging it; the radius of the loop on a wire rope should be at least 18 times its diameter and for a fibre rope it should be 6 times the diameter. A CABLE EYE STIFFENER can also be used to stabilize such loops or slings.

We offer wholesale simplex stainless clamp to take any truck"s engine to the next level. The simplex stainless clamp available can address the issues in the truck"s operations, allowing a smoother ride.

We are now at the last blog post about stainless steel wire rope clips. In today’s post, we focus our attention on duplex and simplex wire rope clips and on nicopress copper sleeve.

JIS Type Wire Rope Clip Rope clips are ideal for providing a temporary or provisional joint, securing 2 pieces of rope together tightly, and making a solid connection, they may be used to form a full loop at the end of the rope to create a firm anchor point. #WireRopeClips #WireRope #ForgedWireRopeClip #Construction #StainlessSteelWireRopeClip #WireRopeFittings #WireRopeAccesorries

Manufacturer of Lifting and Material Handling Products. Our product range includes Industrial Lifting Clamps, Industrial Hooks, Material Handling Equipment, Polyester Slings, Wire Rope & Wire Rope Slings, Chain Sling etc.

1. Arrangement of wire rope clips: The correct arrangement method of the wire rope clip shall be as follows: the clamp seat is fastened to the working section of the wire rope, and the U-shaped bolt is fastened to the tail section of the wire rope Alternately.

2. Number of wire rope clip: For the applicable occasions that meet the standards, the minimum number of wire rope clip required at each connection is recommended to use the number shown in Table 1.

4. Strength of the fixing place between the rope clamps: The strength of the fixing place of the wire rope clips depends on the correct arrangement of the rope clamp on the steel wire rope, as well as the care and skill of the rope clamp fixing and clamping. Inadequate number of tightening nuts or wire rope clip may cause the rope end to slip during loading at the beginning.