single girder wire rope hoist for sale

Prices shown are list prices and include all electrical controls per applicable N.E.C. Specifications, NEMA enclosure with quick disconnect plugs, host completely wired an reeved. All prices are for 460/3/60 power. Adders for 208/3/60 or 230/3/60 are shown on options page. Push button station and 110V control transformer are optional. Monorail hoists furnished with flat tread wheels standard.

Engineered Material Handling (EMH) sets the standard for wire rope hoists. EMH manufactures its own single and double girder wire rope hoists for standard industrial applications, with standard capacities of from 2 to 50 tons. The EMH wire rope hoist provides a price to performance ratio that compares favorably with the best the industry has to offer.

Standard features include two lifting and trolley speeds, two upper and one lower precision limit switches, overload limit, heavy duty wear resistant rope guide, DC rectified brakes, and lifetime lubricated bearings and gear reducers.

A single hoist can, raise the battering of a vehicle, and it can also lift multiple objects. It is even heavier and stronger than steel pulls, which allows it to lift and transport multiple objects at once. Additionally, a single rail hoist can be lifted by one or two wheels. Moreover, it is therefore heavier and stronger than steel pulls, allowing it to lift and carry more objects. Moreover, a single rail hoist can only lift and carry multiple objects. It is also feasible to carry and with space, it is possible to lift and carry multiple objects together.

A single hand hoist is not only forighter vehicles, but it can also be used in locking areas, doors, and many other areas. A single rail hoist is as good as any single rail hoist, as it is not self-balect. It is safe and space-saving, and the installation of any single rail hoist does not require any space to operate. It is not feasible to move in large spaces, and it is highly effortless.

A single rail hoist is sturdy, lightweight, and easy to deploy. It is also sturdy, lightweight steel, which is a great choice for docksing and loading as well. There is, a single rail hoist is also sturdy, lightweight steel, and aluminum to offer additional protection against the potential of docks.

Single Girder electric wire rope hoist 1 ton, a modular design hoist which is filled with European characteristics. This European design is of safety and reliability, only requesting easy maintenance. It is nice to environment, reducing power cost. Of course, we also have double girder hoists to fit for different cranes.

Bridge Crane Specialists offers a select inventory of used and surplus crane and hoist products which includes used overhead cranes, used hoists, and other parts available for purchase. Browse our selection of used products listed belowor contact us to ask about our expanding inventory of new, used, and surplus cranes, hoists, parts, and other overhead crane components.

Please contactMr. Val Ducheneat 1.918.321.3953,1-800.474.5600or via email atvduchene@bridgecrane.comforpricing,availability, orany additional informationregarding the products listed on this page. Contact us to ask about our expanding inventory of new, used, surplus cranes, hoists, parts, and other overhead crane components.

Detroit Hoist has been manufacturing wire rope hoists, made in the USA, since 1905. Detroit Hoist provides top quality products on time and at competitive prices. TSOC is proud to offer TSOC pneumatic wire rope hoists in capacities ranging from 3 Ton to 50 Ton.

TSOC sells, distributes, services and provides parts for Detroit Wire Rope Hoists; serving clients from coast to coast, Canada, Mexico and especially focused in Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

Harrington"s RHN series Electric Wire Rope Hoists are offered in two configurations. The Deck / Base Mounted hoist features a compact, modular design that is perfect for stationary applications or combined with a double girder trolley for double girder crane systems. The Single Girder/Monorail Ultra-Low Headroom trolley hoist is ideal for top running and underhung overhead bridge cranes. The compact body and short end approach result in the longest hook travel possible in facilities with limited space.

Our overhead crane hoist line complies with all of the North American electrical and mechanical regulations and standards for lifting equipment. Our hoists are being actively used for a broad range of applications including but not limited to:​

Munck Cranes is committed to understanding the requirements and challenges of our customers, building insight into your hoisting and material handling requirements so that we can guide these solutions with the proper hoist configuration, capcity, rating, and duty cycle. Our technical sales engineers take pride in this process so that our customers receive the best electric trolley hoist solution that will exceed your expectations now and for years to come.

Below are some of our standard bridge & gantry hoist configurations. If you think that your application may require a low headroom hoist, our team of professionals sales engineers are eager to understand and design a solution for you.

Munck Cranes uses the double girder electric hoist trolley on our standard two-rail overhead cranes as they allow for controlled hook travel. The capacity of this standard trolley hoist line ranges from 5-100 metric tons. For applications that require a capacity over 108 tons; a custom engineered built up hoist will be designed to meet the needs of your lifting application.

The common foot mounted hoist has a basic mounting arrangement so that it can easily be affixed to an existing trolley, a raised platform, or suspended from above. With 5 different hoist drum configurations and multiple reeving configurations, the Munck foot mounted hoist offers a vast array of options for all of your height of lift requirements.

All of our monobox cranes are equipped with the monorail hoist. This series hoist can achieve a remarkable HOL (height of lift) as they have a low headroom design. The image above does not show the electrical panel however the hoist panels can be easily mounted to the trolley in a safe location that is easy to access for routine service work and inspections.

If you are looking for a hoist that has an extremely high height of lift then a twin hoist trolley may be just what you need. This style hoist line can enable true vertical lift and it can also be programmed for individual lifting or dual synchronization lifting. Our hoists are custom engineered to meet all of your material handling and lifting requirements.

1. Hook Block: Safety card as the standard configuration by special mold and adopt high-strenth special slippery rope to reduce the damage to wire rope and ligthen the self weight.

4.Motor:three-in-one imported from Germany. Three in one system integrated by pole-changing professional hoisting motor,brake with electromagnetic disk type and reducer with high rotating speed and hard tooth surface ensures silence and the best safety grade of the hoisting mechanism.

Single girder overhead crane and electric hoist structures are manufactured by strictly following European-style technology standards and Chinese national standards.

Our main products include the lightweight, high performance and energy-saving overhead crane, gantry crane, CH series low headroom electric hoist for the double girder crane, special assembly manufacturing electric hoist, clean room electric hoist and the CW series winch trolley of large-tonnage, etc. At the same time, we also provide our customers with the design and production of steel structure plant, as well as the Turnkey Project service. We always project for you to make some design changes on the crane which can meet your requirements on performance of higher demanded use. CLES will be very glad to help you find the right solution for the project in which you need cranes. Usually we take only a small modification on a standard configuration to make a great improvement on the crane’s performance, which will meet your need better. CLES can help you find the suitable crane and make it the best possible fit for your project.

ABUS electric wire rope hoists are the core element of our crane systems. They are also the result of many decades of research and development by ABUS. Our wire rope hoists are produced at the ABUS production plants at Gummersbach using the most advanced technology available and continue to bear witness to the reliability, and durability of our products. The SWL range of ABUS electric wire rope hoists extends from 1 t to 120 t. Our customers can choose from a wide range of models depending on application and requirements - starting with the standard wire rope hoist in the lower SWL range up to special crab unit designs incorporating additional features at the higher SWL range. However, all wire rope hoists have these characteristics in common: highest levels of uptime availability and safety within materials handling operations.