soft eye wire rope made in china

We are also a unified large family, anyone stick to the corporate value "unification, dedication, tolerance" for ungalvanzied steeel wire rope for cable car 6x19, Sling With Spliced Termination, Electro Galvanized Steel Wire Rope. We understand the needs of our customers at all stages. Our products and services always bring satisfactory results to customers. Pursuing the highest customer satisfaction is the key to our company"s growth! We hope that through the exchange and cooperation with customers, we can contribute to the development of customers and contribute to the progress of the industry. Based on that, our products win a high admiration both at home and abroad. We take customer demand as our development foundation, customer satisfaction as our goal, and meet different requirements at reasonable price.

We"re hunting forward to your check out for joint development for Galvanized Steel Wire Rope Sling with Soft Eye. Now we have not stopped our rapid expansion, and in the future our business will spread all over the world. We have a lot of customers in both domestic and foreign countries.

Slings have a wide range of use thanks to their manageability and easy usage. They can be bright or galvanized with fiber or IWRC or stainless steel wire rope.

Steel wire rope sling with soft eye are manufactured according to the EN13414 standard. Wire rope sling can pass the 2 times safety tesile test or breacking load test. Certificate of quality and certificate of tensile test can be offered.

With more than 20 years of experience in manufacturing and exporting, Hishine supply all range of wire rope slings, such as soft eye and thimble eyes(hard eyes), single leg sling and multi leg slings, endless slings.

Wire rope slings are widely used in the lifting applications and engineering industries for extremely heavy loading, like Heavy lift, Energy, Crane, Industrial manufacturing, Marine, Mining, Transportation.

They come in multiple configurations, Pressed with Aluminum and steel ferrules and can be connected with different terminals: thimbles, closed swag socket, open spelter socket, closed spelter socket etc. They are also available in single leg or multi legs like the chain slings and can be fitted with various lifting components including hooks, rings, shackles, plate clamps, web slings and round slings. Wire rope comes in a variety of finishes including galvanized, bright, PVC coated, dry and lubricated wire rope.

Wire rope slings are a basic material handling tool used to harness various kinds of goods and are the most common type of sling used in industry for lifting applications. Wire rope consists of strands of metal wire twisted in a helix around a core.

They are extremely strong and an excellent choice for heavy duty jobs involving not only lifting, but also hoisting, towing, or anchoring loads. The fabrication of wire slings also offers excellent abrasion-resistance and heat resistance so it can be used in extreme conditions and temperatures.

They are manufactured in a variety of configurations, with 6x19 and 6x36, being two of the most common. The numbers represent the number of wires making up the strand and the number of strands wrapped around the core. For example, a 6x19 indicates that there are 19 wires making up a strand, and 6 strands are wrapped around the core.

They are constructed of strong high quality steel that is resistant to corrosion, heat, sunlight, and most chemicals. Thimbles greatly improve sling longevity by protecting the wire rope at connection points.

For wire rope slings, damage and reduced strength can occur if the wrong size pin or hook is used. The width of the pin or hook should never exceed one half the inside length of the eye. If your pin or hook is large, request an oversized eye for the sling.

They are strong, durable, and versatile, with a wide range of different uses across many industries and fields. Our wire slings have soft eyes at either end, making them easy to handle and use without affecting their strength.

They can be custom made into single, double, triple, or quadruple legs and can have many different end fittings, Slings can be manufactured to closer length tolerance than those normally quoted for hand splicing. The Stretch of the eye and termination is reduced because there are no splicing tucks which will pull down under load.

It is only as good as its end termination. To produce a safe and reliable wire rope sling involves more than just “having a press”, a length of wire rope and fittings.

Our Wire Rope Slings are three-part slings created to replace large diameter single-part ones that proved awkward and stiff. They for everything from steel erection or machinery moving to any type of heavy lift.

Used in steel warehouses, metalworking shops and construction sites, a wire rope or mesh sling grips tightly around loads without stretching and has vertical load limits up to 9.8 tons. Fit for any rugged environment, these low cost slings handle temperatures ranging from –60 to 400°F and abrasive loads that tend to cut web slings.

Wire rope is often used in slings because of its strength, durability, abrasion resistance and ability to conform to the shape of the loads on which it is used. In addition, they are able to lift hot materials. Wire rope used in slings can be made of ropes with either Independent Wire Rope Core (IWRC) or a fiber-core.

Least expensive per capacity of all steel slings. Good abrasion resistance increases useful life of sling. IWRC can be used at temperatures up to 400° F. Countless combinations of sling terminations to fit specific lift requirements. Available in wire core for strength and fiber core for flexibility.

Sometimes referred to wire cable slings, which are more robust and durable than nylon slings and have higher temperature limits. There are many different types of wire cable slings and they all have their own purposes. For instance, the normal sling strength is based on the strength of the wire rope used in the sling.

Rated load is based on pin diameter no larger than one half the natural eye length or not less than the nominal sling diameter. Basket hitch capacity based on minimum D/d ratio of 25/1. For choker hitch, the angle of choke shall be 120 degrees or greater.

Our wire slings are available in various end-terminations and hardware configurations to best suit your needs. Whether you are looking for a standard 105B, a hand-tucked sling for the steel erection/iron worker industry, our wire rope fabrication facilities can fabricate the right solution for your lift, Our products are custom built to meet your specific needs for any application. As most wire rope slings are custom applications, please contact RAMHOIST to custom fabricate your sling for your application.

6×19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7×19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6×19 FC and 6×19 WSC (7×19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys. 7×19 construction is readily available in both galvanised and marine grade stainless steel.Applications

Dawson, an ISO9001 certified firm, specializes in the field of lifting & hoisting equipment, webbing and round sling, ratchet tie down and lashing equipment, chain & chain sling, wire rope and wire rope sling, material handling, rigging hardware & other products. We are located in Qingdao, China. All products are produced under strict standard of quality control. Constant research and development ensures that you are getting the latest products produced with the most advanced and cost effective technologies. Most of our products are CE, TUV & GS certified. We are confident that our products and service will satisfy the highest of standards. From the beginning, Dawson is growing continually, stalely and high-speed.

Wire rope is made of plaiting strands of wire – normally medium carbon steel –into a thick cable. The strands are formed around a core. The strands in wire ropes are made of wore twisted together. Strands with smaller diameter wires are less abrasion resistant and more fatigue resistant. Strands made with thicker length of wore are more abrasion resistant and less fatigue resistant.

Left-hand ordinary lay (LHOL) wire rope (close-up). Right-hand lay strands are laid into a left-hand lay rope. Right-hand Lang"s lay (RHLL) wire rope (close-up). Right-hand lay strands are laid into a right-hand lay rope.

Left hand lay or right hand lay describe the manner in which the strands are laid to form the rope. To determine the lay of strands in the rope, a viewer looks at the rope as it points away from them. If the strands appear to turn in a clockwise direction, or like a right-hand thread, as the strands progress away from the viewer, the rope has a right hand lay. The picture of steel wire rope on this page shows a rope with right hand lay. If the strands appear to turn in an anti-clockwise direction, or like a left-hand thread, as the strands progress away from the viewer, the rope has a left hand lay.

Ordinary and Lang"s lay describe the manner in which the wires are laid to form a strand of the wire rope. To determine which has been used first identify if left or right hand lay has been used to make the rope. Then identify if a right or left hand lay has been used to twist the wires in each strand. Ordinary lay The lay of wires in each strand is in the opposite direction to the lay of the strands that form the wire.

Alternate lay The lay of wires in the strands alternate around the rope between being in the opposite and same direction to the lay of the strands that form the wire rope.

The specification of a wire rope type – including the number of wires per strand, the number of strands, and the lay of the rope – is documented using a commonly accepted coding system, consisting of a number of abbreviations.

This is easily demonstrated with a simple example. The rope shown in the figure "Wire rope construction" is designated thus: 6x19 FC RH OL FSWR 6 Number of strands that make up the rope

Each of the sections of the wire rope designation described above is variable. There are therefore a large number of combinations of wire rope that can be specified in this manner. The following abbreviations are commonly used to specify a wire rope. Abbr. Description

The end of a wire rope tends to fray readily, and cannot be easily connected to plant and equipment. A number of different mechanisms exist to secure the ends of wire ropes to make them more useful. The most common and useful type of end fitting for a wire rope is when the end is turned back to form a loop. The loose end is then fixed by any number of methods back to the wire rope.

When the wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. A thimble can be installed inside the loop to preserve the natural shape of the loop, and protect the cable from pinching and abrasion on the inside of the loop. The use of thimbles in loops is industry best practice. The thimble prevents the load from coming into direct contact with the wires.

A wire rope clamp, also called a clip, is used to fix the loose end of the loop back to the wire rope. It usually consists of a u-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the u-bolt. The saddle is then fitted over the ropes on to the bolt (the saddle includes two holes to fit to the u-bolt). The nuts secure the arrangement in place. Three or more clamps are usually used to terminate a wire rope.

Swaging is a method of wire rope termination that refers to the installation technique. The purpose of swaging wire rope fittings is to connect two wire rope ends together, or to otherwise terminate one end of wire rope to something else. A mechanical or hydraulic swager is used to compress and deform the fitting, creating a permanent connection. There are many types of swaged fittings. Threaded Studs, Ferrules, Sockets, and Sleeves a few examples.

A socket termination is useful when the fitting needs to be replaced frequently. For example, if the end of a wire rope is in a high-wear region, the rope may be periodically trimmed, requiring the termination hardware to be removed and reapplied. An example of this is on the ends of the drag ropes on a dragline. The end loop of the wire rope enters a tapered opening in the socket, wrapped around a separate component called the wedge. The arrangement is knocked in place, and load gradually eased onto the rope. As the load increases on the wire rope, the wedge become more secure, gripping the rope tighter.

Eye Splice The ends of individual strands of this eye splice used aboard a cargo ship are seized with natural fiber cord after the splicing is complete. This helps protect seaman"s hands when handling.

It is the goal of LKS Wire Rope to provide manufactured rigging products and hardware which are competitively priced and delivered on time with zero defects at quality and service levels that are consistent with the expectations of our customers. We fully understand that to do so is good business. The success of LKS Wire Rope depends on our commitment to associate involvement, continual improvement, and improved business performance goals.

Q2. What’s safety factor does your product use?A2: General, use a 5 to 1 or 3 to 1 safety factor when we design it. eg: breaking load is （1000 N）100 kgs, safety factor is 5:1 （200 N), Breaking strength should never be considered the ropes working load.Q3. I would get a flexible cable assembly first to testing the performance, how do I choose?A3: The same diameter of steel wire cable ,the 7X19 construction is more flexible than the 7X7 construction. eg:1/16’’7X19 steel wire rope more flexible than 1/16’’7X7Q4. Which material should I choose?A4: Stainless steel cable has better corrosion resistance, but more expensive and slightly less tensile strength than galvanized wire cable. If it is used for general industry, galvanized steel is OK, as for marine environment, stainless steel wire cable will be recommended, It depends on you application.Q5. What’s the lead time of my order?A5: Normally,20 working days.It is largely depending on the amount of your order. If you are in urgent need of it, our team will try our best to meet your requirements,so if you have any other queries, Feel free to contact us:-) We are here ready to help!

Jiangsu Rongstar Industry Co., Ltd. is a professional company focusing on the development and production of high-end metal cables. The R & D and operation of the company"s products started from Taizhou headquarters, with its marketing center in Shanghai, and a production base in the city Binhai and Jiangyin. In these places, the engineers, designers and manufacturing experts of Rongstar industry have been working hard. Through continuous exploration and technical practice, they have created products that can truly solve the quality and cost advantages of metal ropes, and adhere to intelligent manufacturing to create greater value for customers.

We often think about why we can"t provide good quality with low cost products for industrial customers. That"s good but expensive or the low-cost with poor quality products have been consuming the courage of the experimenters has eroded the patience of the industry customers. What"s terrible is that we can"t continue to make progress. Rongstar has been committed to making industrial products with high quality and good price. We always pay attention to the production system Cost of manufacturing link, focusing on intelligent production mode of metal rope!

Steel wire rope Grommets, with fibre or IWR core, are widely used on offshore field and on heavy lifting. The Grommet sling is made braiding 3 times the nominal diameter (e.g. a steel wire rope Grommet diameter 30 mm. is made braiding 3 times the steel wire rope diameter 10 mm.) and splicing the ropes’ ends to “tie” them together.

The big advantage of this type of slings is the possibility to reach very significant diameters manufacturing up to 180 mm., sizes that is not possible to reach with Sleeves’ swaging process and compared to the same soft eyes Slings’ diameters the Grommets’ WLL is impressively greater.

Wire rope slings are industrial lifting slings. There’re single leg wire rope sling, 2-leg wire rope sling, 3-leg wire rope sling, 4-leg wire rope sling, braided wire rope slings, endless wire rope grommets, socket wire rope slings. Bespoke slings are available.