southwest wire rope sulphur factory

Southwest Wire Rope"s Engineering Services Department provides engineered lifting devices, lift plans, and engineered load testing services under the leadership of experienced Professional Engineers with extensive experience in heavy lifting.

• Tensile Strengths are determined in accordance with Cordage Institute 1500.2. Test Methods for Fiber Rope. Minimum Tensile Strength (MTS) published assumes spliced eye tenninations at each end of the rope. Weights actually calculated at linear density under state preloaded (200d’J plus 4%. Diameter and circumference size published is nominal and reflects rope size after loading (10 cycles) to 50% ofMTS. See reverse side for application and safety information .

Plasma® 12 strand is the highest strength synthetic rope available. Plasma® 12 strand is manufactured from High Modulus Polyethylene (HMPE) that has been enhanced by Cortland’s patented recrystallization process. This process is especially effective in medium to large diameter ropes where strengths are over 50% higher and creep is significantly less than that of standard Spectra® 12 strand.

In rigging, we all know that the setup is only as strong as its weakest link. Any failure is a potentially dangerous situation that puts your entire operation in jeopardy. Every component must be relentlessly reliable. Synthetic rope is one such tool that bears heavy responsibility. While incredibly strong and durable, it often immediately supports a load; if it were to fail, the results would be catastrophic.

You will likely never seeused in a rig as they are weaker and less durable than their synthetic counterparts. With this in mind, let’s discuss the advantages of synthetic rope.

Synthetic rope is made from nylon, polyester, or polypropylene fibers. These ropes can be made using one or a combination of these synthetic fibers. Much like a natural rope, these fibers are drawn out into strands and then woven together. The end result is a durable, strong rope that can bear markedly more weight and tension than its natural counterpart.

Because of the materials used, synthetic rope is better able to withstand friction, making it more durable. It should be noted that how much you use the rope and its length of service will directly affect how long it lasts. Sporadic use could see it surviving for up to 10 years, whereas heavy use will require replacement every year or two. Synthetic rope is great for outdoor uses, as it is resistant to rot and mildew that can arise from exposure to moisture.

Synthetic rope is useful for a host of additional purposes. Its resistance to moisture makes it ideal for use in marine applications, but it has various advantages outside of the rigging sphere. It serves as an excellent climbing rope due to its abrasion resistance – it can handle rough edges of the terrain without fail. This is also what makes it perfect for rigging in film and theater. Where creative problems often require creative solutions, crews know they can rely on these ropes to hold the scene together. Synthetic rope can also be used effectively in towing and hauling applications.

has been a leader in wire rope and rigging supplies in the Gulf Coast region since 1966. We provide quality supplies and reliable service to each one of our clients so they can meet the tough demands of the industry with confidence and excellence. We are happy to share our decades of experience to help you find the best solution for whatever undertaking you have in front of you. From synthetic rope and slings to wire rope and chains, we have a comprehensive product offering to completely outfit your rig.today to level up your operation.

Wire rope is arguably the most important asset that arigging equipment providercan supply. It forms the backbone of every operation, helping to execute every lift and move heavy loads with precision and security. Withoutwire rope, the rigging, overhead lifting and securement industries couldn’t meet demands.

For these reasons, it is absolutely crucial to make sure wire rope is properly maintained.Storing wire ropesafely and intentionally will help lengthen its working life and improve the safety of your daily operations. Keep reading to discover the key considerations and tips for storing wire rope.

The best method of storing wire rope is on a reel. This helps to maintain the shape and function of the rope over time by avoiding kinks and tangles, which can damage the integrity of the rope and reduce its safety and usefulness. Reels also help centralize wire rope into space-efficient units that can be transported and even stacked.

Once spooled onto a reel, it will be simple and easy to remove the desired length of wire rope when needed. Whether you are working with drilling rigs, cranes or winches, we recommend that you have your wire rope installed and removedby an  experienced professional.

Wire rope is a vital piece of equipment, and it should be stored as such. Water, salt, dust, steam, temperature extremes and chemical fumes canwreak havocon the structure and strength of wire rope. Therefore, store your wire rope supply in a cool, dry, covered, and well-ventilated place. An  indoor location is best, but if you must store wire rope outdoors, make sure it is covered with waterproof material.

Additionally, make sure no part of the rope is touching the ground, and that the base of the wire rope reel is elevated at least a few inches in case of flooding. Water immersion can cause the wire rope to corrode and its lubricant to wear off. . When in doubt, check with your rigging equipment provider about wire rope spooling to ensure it is done right.

Inspections of various pieces of rigging equipment are required by law on a regular basis – and wire rope is no exception. Work with your rigging equipment provider to have your wire rope inspected if it has been stored for an extended period of time. A full-scalerigging inspectioncan also help you determine where and how to store your wire rope on the front-end of a project. A qualified rigging equipment inspector will be able to address the quality and condition of all your rigging and lifting gear, furnishing detailed reports on their findings.

At Southwest Wire Rope, our team has been serving the needs of the rigging, overhead lifting and securement industries with unwavering excellence for 56 years. If you’re searching for a rigging equipment provider, wire rope spooling and storage help or a certified inspector, turn to the professionals at Southwest Wire Rope. Our experienced team can provide insights and recommendations for the type of wire rope, end fittings, hardware, and operational procedures that best suit your facilities and equipment. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offering.

While the past six decades have ushered in sweeping changes, some things have remained the same. For that entire time, Southwest Wire Rope has remained a stalwartrigging equipment providerwith a reputation for quality and service. We’ve been providing rigging inspections, testing, and the strongest wire rope on the market for years – and we have no intention of slowing down. Here’s how we continue to uphold and define industry standards.

To ensure that each facility and piece of operating equipment is up to code, rigging inspections are required by regulators. At Southwest Wire Rope, we employ a team ofcertified inspectorsthat can investigate every aspect of a rig, from the heavy machinery down to the shackles. With attention to detail cultivated by hundreds of years of combined rigging experience, our inspection team offers industry-leading guidance and professional recommendations. Reporting fromTESSALinkasset management software adds to our comprehensive service offering.

In addition to routine inspections, the Southwest Wire Rope team also performed destructive (break) testing of up to 1.7 million pounds from two separate locations. Need field spooling? We provide on-site installation and removal of wire and synthetic ropes on drilling rigs, cranes and winches. Through our steadfast commitment to raising the bar, we make sure our clients are meeting and exceeding all industry requirements.

At our core, we are rigging equipment providers, and we strive to strengthen our offerings and expertise on a daily basis. In 1983, we introduced our trademark proprietary brand of wire rope to the market, characterized by an iconic gold strand. Nearly 40 years later, “Gold Strand” wire rope is still recognized as the strongest and most reliable wire rope on the market.

Additionally, we have acomplete offeringof wire rope fittings, synthetic and round slings, chains, and other rigging hardware. We pride ourselves on being experts in the rigging equipment space, providing not only the tools to get the job done, but also the guidance to do it right.

Our team has been serving the needs of the rigging, overhead lifting, and securement industries with an unwavering dedication to quality and excellence for over half a century. If you’re searching for a rigging equipment supplier, or need your system inspected by a certified inspector, turn to the professionals at Southwest Wire Rope. Our experienced team can provide insights and recommendations for the type of wire rope, end fittings, hardware, and operational procedures that best suit your facilities and equipment. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offering.

The commodity that “holds up” the rigging, lifting, and overhead securement industries is indisputably wire rope. Combining strength with flexibility, wire rope helps operations of all sizes move heavy loads where they need to go with safety and ease. Without enough properly tested and verified wire rope on hand, the output and productivity of the entire plant can grind to a standstill.

Because every project has different requirements, various types of wire rope are designed and fabricated to serve different purposes. With a variety of orientations, strengths, and load capacities, it’s important to know exactly which variety works best for your job. Here’s a breakdown of the major categories.

The “class” of wire rope refers to the number of wires that compose a strand, as well as how many strands surround the core. For example, 6×31 FC wire rope consists of 6 strands containing 31 wires each, which are wrapped around a fiber core.

General purpose wire rope– the variety most commonly used for daily rigging operations such as lifting, overhead securement, pulling, and establishing tension – most often contains six strands and an Independent Wire Rope Core (IWRC). Each of these strands can contain anywhere from 16 to 49 wires, with more wires increasing the flexibility of the rope.

General purpose wire rope can range in diameter from ¼ inch to 6 inches, with larger diameter  ropes having breaking strengths of hundreds or even thousands of tons. For a detailedwire rope strength chart, consult our cataloghere.

Most cranes and some overhead lifting and securement devices require specialized wire rope that prevents the load from rotating. This is often achieved by having layers of compacted strands, oriented in a tightly-knit pattern around a core and layed in alternating directions. For example, the Oliveira NR Maxipact PPI contains 18 outer strands, forming wire rope that can be effectively implemented in a non-rotating environment at temperatures from -50°C to +80°C.

Compacted varieties of crane wire rope provide increased fatigue resistance, strength, stability, and abrasion resistance. Often considered thestrongest wire ropeon the market, these types of wire rope are perfect for mining, industrial, construction, logging, and oilfield applications.

Other rotation resistant varieties come in 19×7 and 8×19 classes with an IWRC; for more detailed information, view thewire rope strength chartand select Wire Rope > Crane.

Finally, in addition to customized lengths and types of wire rope, a qualified rigging equipment provider can also supply pre-fabricatedwire rope slings. These slings are outfitted with eyes or sockets that affix the load to a lifting device. Wire rope slings come in dozens of orientations, sizes, and diameters, allowing for ultimate customization when outfitting your rigging operation. Check out the catalog or connect with a rigging equipment professional for guidance and to place your custom order

The professionals atSouthwestWire Rope have been serving the needs of the rigging, overhead lifting, and securement industries with an unwavering dedication to quality and excellence since 1966. If you are in the market for industry-leading lifting gear, or need your system inspected by a certified inspector, turn to the pros at Southwest Wire Rope. Our experienced team can provide insights and recommendations for the type of wire rope, end fittings, hardware, and operational procedures that best suit your facilities and equipment. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offeringand get in touch.

Cut to precision lengths in dozens of diameters, customizedwire ropecan help bring your operation to the next level. For more than 50 years, the team at Southwest has been helping the industry’s biggest players outfit their facilities with the best wire rope in the business. Our technicians can work alongside you to help determine the optimal thickness and orientation for your operation.

Not all chains are created equal. Every chain is tested to ensure it lives up to the Southwest legacy. Our team is familiar with every major type of chain configuration and linkage, so we can help you secure heavy loads and maximize your lifting potential while keeping your crew safe.

When it comes to lifting gear, every sling, strap, link, wire rope strand, and piece of hardware is vital to the overall success of the operation. Investing in customized below-the-hook products that are expertly fitted to your unique needs and capacity will help make your facility safer and your equipment more effective.

The professionals atSouthwesthave been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for industry-leading lifting gear, or need your system inspected by a certified inspector, turn to the pros at Southwest Wire Rope. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offeringand get in touch.

A proof load test is just what it sounds like: it proves whether a piece of rigging equipment can bear the load it is designed to. The test is administered in a controlled, measured fashion with a particular multiple of the maximum designed load (generally 1.1 to 1.5 times) and a specified length of time. After the test is completed, the operator will issue a certification confirming the workable load of the wire rope or other rigging component in question.

Whether the rig is overdue for a full inspection, the newly minted wire rope is being put to the test, or older equipment is being evaluated to determine if it is still fit for use, a proof load test is an immensely valuable tool. Every rigging component in the operation should be tested regularly, and a proof load test is one of the most complete and strenuous methods for doing so. Testing also helps keep the rigging equipment and the business as a whole within the boundaries of the OSHA, Department of Labor, and manufacturers’ codes that govern the industry.

The best way to keep your employees safe during a proof load test is to entrust the entire ordeal totrained professionals. Proof load tests are incredibly dangerous if not done with the proper equipment and control measures, as breakage can occur.

AtSouthwest Wire Rope, we provide proof load testing and destructive (break) testing of various lifting devices up to 1.7 million lbs. Proof load testing can be performed using specialized rigging and custom built test jigs that replicate the ultimate field installation of complex and highly engineered products. As you can imagine, this specially designed equipment is operated by industry veterans. By outsourcing the tests to an industry partner like Southwest, you can keep your crew out of harm’s way.

In reality, the advent of performing the test and verifying the strength of the equipment is also keeping your crew safe. Using wire rope or lifting gear until failure is a dangerous proposition and never recommended. Instead, get your equipment certified with a proof load test and gain the peace of mind your professionals deserve.

The professionals atSouthwesthave been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for leading rigging and lifting gear, need your system tested, or are simply looking for an expert opinion, turn to the pros at Southwest Wire Rope. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offeringand get in touch.

When it comes to lifting gear, one faulty sling, strap, link, wire rope strand, or other piece of hardware can put the entire operation in jeopardy. Investing in equipment that isand is backed by the quality and reputation of awill help ensure your machinery runs smoothly. Codes were developed in the first place to protect your crew from dangerous breakage, equipment wear, and malfunctions, so starting with the best materials is the most effective way to ensure you’re always in line with recent codes.

A destructive or “break” test measures the tensile strength of wire rope by using magnetic and hydraulic arms to pull opposite ends of the rope apart. The test continues until the wire strands begin to fail, and eventually, the wire rope gives out. This is an extremely loud and dangerous endeavor – a break test should never be conducted without the proper equipment and certifications. Work with an industry provider who can conduct a wire rope break test usingin a safe and controlled setting. The results of this test will be printed on a load testing certification, which will help you satisfy regulations.

The professionals athave been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for leading rigging and lifting gear, need your system tested, or are simply looking for an expert opinion, turn to the pros at Southwest Wire Rope. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourand get in touch.

We’ve all heard that a chain is only as strong as its weakest link. In the rigging business, one faulty sling, strap, link, or wire rope strand, or piece of rigging hardware can jeopardize your entire operation. Investing in equipment that iscrafted to lastand backed by the quality of aleading supplierwill help ensure your machinery runs smoothly and your crew is protected from breakage or equipment wear.

When you first went into the rigging business, you were undoubtedly required to develop a comprehensive set of safety procedures that relate to facility management, personnel, and equipment operation. As your team has grown and your inventory has changed, it’s important to keep your safety protocols updated. If you need help developing safety procedures tailored to your rigging operation and equipment,get in touchwith the team at Southwest today.

The professionals at Southwest have been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for leading rigging equipment, need your rigging system tested, or are simply looking for an expert opinion, turn to the pros at Southwest Wire Rope. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourproductsandservicesorcontact a reptoday.

One of the most reliable ways to increase the strength of a rigging operation is by investing in high-quality wire rope. Formed from a steel core and wrapped with concentric wire strands, wire rope is an extremely versatile asset that can bear hundreds of thousands of pounds of load, yet remain flexible. For more than 50 years,Southwest Wire Ropehas been supplying some of the strongest and most recognizable wire rope products on the market.

To determine the true strength of wire rope, though, we need to put it to the test. Destructive or “break” testing can be dangerous, but is a useful measuring tool to gauge the strength of wire rope. Here’s everything you need to know about break testing.

Put simply, a destructive or break test measures the tensile strength of wire rope by using magnetic and hydraulic arms to pull opposite ends of the rope apart. The test continues until the wire strands begin to fail, and eventually, the wire rope gives out. This results in an extremely loud explosive noise and frayed metal remnants, which can be extremely dangerous. At the conclusion of the test, the true strength of the rope is evident based on the load reading at the point of breakage.

A break test should absolutely never be conducted without the proper equipment, certified staff, and safety protocols. If you are unsure whether you can perform a break test at your rigging site, then the answer is undoubtedly no. Only specialized machinery operated by trained professionals is fit to manage a destructive test, and attempting a DIY test is a recipe for a regulatory violation and a potential safety hazard.

The only way to know the true strength of a piece of wire rope is to perform a break test in a certifiedtesting facility. As wire rope specialists, the team at Southwest is trained in conducting safe, effective tests of all of our products. If you need your wire rope certified, are curious about the capacity of your rigging system, or are interested in stronger products, we can help. In addition to testing, Southwest is a leader in on-site rigging inspections, rental equipment, field spooling, and other services. Get in touch with a rigging professional today to learn how we can helpoutfityour rigging operation for maximum performance.

The professionals at Southwest have been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for leading rigging equipment, need your rigging system tested, or are simply looking for an expert opinion, turn to the pros at Southwest Wire Rope. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourproductsandservicesorcontact a reptoday.

One such way that many operators attempt to increase output is by increasing the capacity of each load. More productive loads means jobs get completed faster and more efficiently, and the next project can begin. So, how can we increase the strength and speed of our operation through better lift capacity? Keep reading to hear some ideas from the veterans atSouthwest Wire Rope.

At Southwest Wire Rope, we’ve spent the past56 yearsbecoming experts in fabricating the highest quality rigging and lifting products on the market. From rope and chains, to synthetic web and round slings, along with all the hardware you’ll need, we can help you outfit your crane with the best equipment to ensure it’s running at maximum capacity. If you need guidance on which attachments work best for you, we’re here to help.

The professionals at Southwest have been serving the needs of the rigging and lifting industries with an unwavering dedication to quality and excellence for years. If you are in the market for leading rigging equipment, need your rigging tested, or are simply looking for an expert opinion, we can help. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourproductsandservicesorcontact a reptoday.

The commodity that “holds up” the rigging, lifting, and overhead securement industries is indisputably wire rope. Combining strength with flexibility, wire rope helps operations of all sizes move heavy loads where they need to go with safety and ease. Without enough properly tested and verified wire rope on hand, the output and productivity of the entire plant can grind to a standstill.

Because every project has different requirements, various types of wire rope are designed and fabricated to serve different purposes. With a variety of orientations, strengths, and load capacities, it’s important to know exactly which variety works best for your job. Here’s a breakdown of the major categories.

The “class” of wire rope refers to the number of wires that compose a strand, as well as how many strands surround the core. For example, 6×31 FC wire rope consists of 6 strands containing 31 wires each, which are wrapped around a fiber core.

General purpose wire rope– the variety most commonly used for daily rigging operations such as lifting, overhead securement, pulling, and establishing tension – most often contains six strands and an Independent Wire Rope Core (IWRC). Each of these strands can contain anywhere from 16 to 49 wires, with more wires increasing the flexibility of the rope.

General purpose wire rope can range in diameter from ¼ inch to 6 inches, with larger diameter  ropes having breaking strengths of hundreds or even thousands of tons. For a detailedwire rope strength chart, consult our cataloghere.

Most cranes and some overhead lifting and securement devices require specialized wire rope that prevents the load from rotating. This is often achieved by having layers of compacted strands, oriented in a tightly-knit pattern around a core and layed in alternating directions. For example, the Oliveira NR Maxipact PPI contains 18 outer strands, forming wire rope that can be effectively implemented in a non-rotating environment at temperatures from -50°C to +80°C.

Compacted varieties of crane wire rope provide increased fatigue resistance, strength, stability, and abrasion resistance. Often considered thestrongest wire ropeon the market, these types of wire rope are perfect for mining, industrial, construction, logging, and oilfield applications.

Other rotation resistant varieties come in 19×7 and 8×19 classes with an IWRC; for more detailed information, view thewire rope strength chartand select Wire Rope > Crane.

Finally, in addition to customized lengths and types of wire rope, a qualified rigging equipment provider can also supply pre-fabricatedwire rope slings. These slings are outfitted with eyes or sockets that affix the load to a lifting device. Wire rope slings come in dozens of orientations, sizes, and diameters, allowing for ultimate customization when outfitting your rigging operation. Check out the catalog or connect with a rigging equipment professional for guidance and to place your custom order

The professionals atSouthwestWire Rope have been serving the needs of the rigging, overhead lifting, and securement industries with an unwavering dedication to quality and excellence since 1966. If you are in the market for industry-leading lifting gear, or need your system inspected by a certified inspector, turn to the pros at Southwest Wire Rope. Our experienced team can provide insights and recommendations for the type of wire rope, end fittings, hardware, and operational procedures that best suit your facilities and equipment. We look forward to answering your questions and forming a lasting partnership. For more information, browse ourservice offeringand get in touch.

Southwest Wire Rope was established in 1966 to meet a strong demand for reliable service and quality wire rope required by industries along the Gulf Coast. Since those early years, we have expanded and increased our product line to meet diversified markets around the world. Today, we are a prime supplier of material handling, lifting & mooring products globally with a quality management system certified to ISO 9001:2015 by Det Norske Veritas.

In 1983, we introduced our identifying trademark to the industry that has become synonymous with the word “quality”. That trademark is “Gold Strand” wire rope identified by the distinctive gold colored strand.

Today, “Gold Strand” wire rope is marketed by many wire rope companies throughout the world and is recognized as a quality product supplied by Southwest Wire Rope.

Southwest Wire Rope maintains a large inventory of wire rope in a full range of diameters and constructions to meet the needs and expectations of the market, in addition to testing capabilities up to 1.5 million lbs.

Since 1966 Southwest Wire Rope has expanded to become a recognized global wire rope supplier serving diversified markets with material handling, lifting & mooring products at five full-service locations. Large, full-range inventory includes their trademark “Gold Strand” wire rope; bright, galvanized, stainless steel & vinyl coated cable; plus wire rope slings & a variety of fittings & hardware.

Celebration Worship Center Asssembly of God, Employees and members of Celebration Worship Center Assembly of God in Sulphur, LA who qualify for membership in accordance with Celebration Worship Center Assembly of God’s charter and bylaws in effect on April 9, 1955; August 20, 2012.