southwest wire rope sulphur for sale

Southwest Wire Rope"s Engineering Services Department provides engineered lifting devices, lift plans, and engineered load testing services under the leadership of experienced Professional Engineers with extensive experience in heavy lifting.

• Tensile Strengths are determined in accordance with Cordage Institute 1500.2. Test Methods for Fiber Rope. Minimum Tensile Strength (MTS) published assumes spliced eye tenninations at each end of the rope. Weights actually calculated at linear density under state preloaded (200d’J plus 4%. Diameter and circumference size published is nominal and reflects rope size after loading (10 cycles) to 50% ofMTS. See reverse side for application and safety information .

Plasma® 12 strand is the highest strength synthetic rope available. Plasma® 12 strand is manufactured from High Modulus Polyethylene (HMPE) that has been enhanced by Cortland’s patented recrystallization process. This process is especially effective in medium to large diameter ropes where strengths are over 50% higher and creep is significantly less than that of standard Spectra® 12 strand.

On this page you will find important information about Southwest Wire Rope Inc based in Sulphur, LA, like the address, contact person and details, as well as the email address and home page.

For travel by car, directions from your location to Southwest Wire Rope Inc at 575 Dennis Road in Sulphur, LA will be displayed via link >>my route<< below the map.575 Dennis Road, Sulphur, LA 70665, United States

For questions regarding Southwest Wire Rope Inc you can call the following numbers, or find the appropriate contact on the homepage of Southwest Wire Rope Inc via www . southwestwirerope.com.PHONE NUMBER:

To request more information about Southwest Wire Rope Inc from abroad please call the international phone number +1.337.583.4731 under which you will be able to speak with the appropriate contact person.

Please send written inquiries and notices to Southwest Wire Rope Inc from abroad to the international fax number +1.337.583.9386 or to the company email address. Call displayed telephone number to ask for respective email address of Southwest Wire Rope Inc.

Manufacturer of material handling, lifting and mooring products required by industries along the Gulf Coast. The company"s products include wire rope slings, nylon slings, round slings, chain, shackles, thimbles, sockets and other related products.

HOUSTON, June 27, 2017 (GLOBE NEWSWIRE) -- Southwest Wire Rope, a Heavy Lift Division of HWCC (NASDAQ:HWCC), has received its DNV GL Type Approval Certificate (TAC) to design, manufacture, test, tag, and certify lifting sets for Offshore Containers (DNV 2.7-1) and Portable Offshore Units (DNV 2.7-3). These certifications position Southwest Wire Rope as a DNV GL certified manufacturer of the largest wire rope diameter for offshore lifting slings in the US.

DNV is the premier accredited registrar and classification society for offshore lifting in the world.  Offshore companies require or prefer DNV certification for offshore lifting needs. The TAC covers wire rope sizes up to 3-1/2" (89 mm) with a  Working Load Limit of 92 metric tons (applicable to DNV 2.7-3), the largest wire rope size in the US; and,

Southwest Wire Rope will design & manufacture slings for DNV 2.7-1 & DNV 2.7-3 without requiring DNV GL"s approval, resulting in shorter lead times and lower costs for customers; and,

Established in 1966 to meet a strong demand for reliable service and quality wire rope required by industries along the Gulf Coast, Southwest Wire Rope has grown to become a prominent powerhouse in the lifting and rigging category.

Since its founding, Southwest Wire Rope has expanded its product lines across all below-the-hook lifting needs, inspection and safety services & equipment, and has become a licensed engineering firm in Texas and Louisiana.  Southwest Wire Rope is the Gulf Coast"s premiere source of wire rope slings, nylon slings, round slings, chain, shackles, thimbles, sockets, and other related hardware in stock at their full-service locations in Texas & Louisiana.

Standard stock items available for immediate delivery include continuous and interlocked armor cable; instrumentation cable; medium voltage cable; high temperature wire; portable cord; power cable; primary and secondary aluminum distribution cable; private branded products, including LifeGuard™, a low-smoke, zero-halogen cable; mechanical wire and cable and related hardware, including wire rope, lifting products and synthetic rope and slings; corrosion resistant fasteners, hose clamps, and rivets.

This certification positions Southwest Wire Rope as a DNV GL certified manufacturer of the largest wire rope diameter for offshore lifting slings in the US.

DNV is the premier accredited registrar and classification society for offshore lifting in the world. A vast majority of offshore companies require (or at least prefer) DNV certification for offshore lifting needs. What sets Southwest Wire Rope apart from its competition in this space boils down to three key factors:

The TAC covers wire rope sizes up to 3-1/2″ (89 mm) with a Working Load Limit of 92 metric tons (applicable to DNV 2.7-3) , the largest wire rope size in the US; and,

Southwest Wire Rope will design & manufacture slings for DNV 2.7-1 & DNV 2.7-3 without requiring DNV GL’s approval, resulting in shorter lead times and lower costs for customers; and,