ss wire rope railing price

* Price ranges reflect average pricing based on intermediate customization choices and finishes, not including sales tax or shipping costs. Some projects may be subject to higher rates. It is possible to purchase railing systems for less than the lowest price in the range based on customization and finishing choices.

A whole cable railing system, including posts, handrail, cable, and hardware, costs about $150-$285 per linear foot. The price of cable railing will vary greatly depending on what type of material you use, whether you use wood or metal posts, and the number of corners and runs of cable you need.

Cable railing can use both metal and wood posts. Wood cable railing systems can use pre-existing or purchased wooden posts, which can make this a budget-friendly cable railing option. Products like our cable railing kits – Drivetite allows you to drill into your wooden posts and tension runs of cable to form the cable railing system. Using our cable railing kits for wood posts to create Wood Cable Railing (without purchasing posts) will cost about $10-12 per linear foot before kit cost.

Using aluminum for your cable railing system will cost about $150-240 per linear foot, which is about 30% less than using stainless steel posts. Our DIY cable railing system (Express Cable Railing) uses aluminum cable railing posts making it a great way to save money when your project doesn’t require the extra strength and security that comes with stainless steel. Plus, aluminum cable railing posts are suitable for indoor and outdoor* use.

Using stainless steel on your cable railing system will give your railing extra strength and durability. It will cost $215-285 per linear foot, depending on the grade of your stainless steel. Viewrail offers 304 stainless steel and 2205 duplex stainless steel posts. 304 stainless steel is a great option for outdoor projects that are not near the water. 2205 duplex stainless steel posts are ideal for the toughest environments. This is the same material that is used on deep sea oil rigs, high-traffic tourist areas, and other saltwater locations. Stainless steel cable railing posts will cost about $150 per post for 304 Stainless Steel, and $200 per post for 2205 Duplex Stainless Steel

A general rule of thumb for planning out the cost of your cable railing project is that corners add cost. If cable simply runs through a post, it will cost less than a cornerpost which holds the tension for each line of cable. Since corner posts tension the runs of cable, they require cable railing hardware which will increase your total railing cost. Check out the glass railing cost guide for a comparison between cable and glass railing.

"I"m very pleased with the quality and strength. Everything fit and went together easily. I was very happy with the way your company takes the time to carefully wrap and pack the railing posts..."

Enjoy stainless steel cable Enjoy savings? Stainless Cable & Railing Inc. now offers discounted bulk rolls of cable for your next railing project! Our overseas suppliers offer us special deals thanks to our growing business, which means we can pass those deals on to you.

Our 1x19 stranded cable rope is composed of 19 individual wires twisted together. Made from 316 marine grade stainless steel, this cable resists rust in harsh weather conditions, like salty ocean breezes. Perfect for stainless steel railing systems in all environments.

Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Citrisurf 77 Plus to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

The cost of cable railing installed by a contractor is $60 to $165 per linear foot based on the materials used for posts, the number of cable rails and the complexity of the deck itself.

The average cost of cable railing professionally installed is about $135 per linear foot. The breakdown is roughly $100 per foot for the most common materials and $30 per foot for installation labor, which includes installing the materials and getting the permit. If old railing is removed and disposed of by the contractor, additional costs will come into play.

Cable railing gives any deck a contemporary profile with minimal obstruction. But it comes at a higher price than most other options like aluminum or similar like metal and cast iron railings. The cost of cable deck railing is only exceeded by glass railing prices.

This cable railing price guide discusses cost factors to help you consider which materials fit your budget. A list of retail costs and a comparison of cable railing price based on what materials are used for posts and rails. Composite railings are a very popular choice and keep the modern look and appeal, when matched with cable runners. There’s a place for homeowners to submit their costs providing real-life prices for other readers. Consider bookmarking this page of Costimates and return to share your project prices with others.

Cost estimates for cable deck railing vary widely, and most sites underestimate price. Deck Cost Guide pegs the price at $40-$60 per linear foot, but you’d have to use the cheapest materials and install them yourself into existing posts to get close to that cost. Even Home Advisor, a typically reliable site, offers a narrow cost range of $60 to $135, definitely on the low side of what homeowners are paying for cable deck rail systems.

Wood posts and optional rail plus cable: $65 – $115 depending on whether you use existing posts or install new posts. The DriveTite cable railing system is about $75 per foot when existing posts are used.

Wondering whether to go with aluminum or stainless steel? Aluminum is lighter and costs less. The chief advantage of stainless steel is that it holds up better to marine/salt spray environments and those with heavy amounts of pollution. Otherwise, aluminum is the cost-effective option.

Rail Choice – In most materials, you have the option of narrow, cost-effective top rails or wider rails often called drink rails which are wide enough to securely hold a glass or plate.

Many homeowners install cable into existing wood posts when refurbishing or repairing an old deck. Whether you’re repairing an existing deck or constructing a new one, here are cable railing cost comparisons for materials.

$60 – $90 per linear foot | Aluminum Cable Railing Kits – they are an affordable choice for homeowners willing to assemble them. DesignRail kits by Feeney are a popular example.

If you’re removing just railing, you can probably dispose of it a little at a time in your weekly trash pickup. If its metal, your recycling facility might take it.

When you’re removing the entire deck, renting a dumpster can reduce disposal costs, especially if you’ve been waiting to do a major clean-out project or have a couple neighbors you can share the cost with. This makes sense because the larger the container you rent, the less it costs per cubic yard of capacity.

$30 – $150 | A permit including an inspection is required for any deck with a railing. Deck size and where you live determines exact cost of the deck permit.

Here’s what DIY cable deck railing installation will save you. The low end is for decks with predrilled wood and metal posts, while time/costs go up if wood posts must be drilled onsite.

A team of two experienced installers can install 8 to 15 linear feet of cable deck railing based on job complexity. There will be a little setup and clean-up time too.

Installing cable deck railing is a moderate to difficult job, so your skillset will determine whether to tackle it or not. It’s also time consuming, so factor in how quickly you want to use the deck when deciding.

Special challenges include getting the holes absolutely level and evenly spaced plus installing lag terminal assemblies to keep the cable taught, as shown here. Here’s a good resource with both written manuals and video tutorials. Take a look, so you know what you’ll be getting into if you decide to tackle the job.

The most common question we hear from prospective clients is “how much do cable railings cost?” However, unlike many other types of railings, cable railings don’t have a simple price per linear foot.

At Keuka Studios, we pride ourselves in our custom metal fabrication and our attention to detail throughout the process. We work closely with our customers to create the perfect railing system for their specific needs. In turn, we price our cable railings based on numerous variables.

What makes it so difficult to price cable railing by linear foot? First and foremost, the unique shape and size of a deck or staircase dictate the majority a specific project’s cost.Of course, the scale of the project impacts the price of the cable railing; bigger projects require more materials and more time to produce. In addition, we occasionally offer a discount for large-scale projects.How the shape of a railing impacts its price is less straight forward. For example, corners will add cost to your cable railing. As a general rule, the more corners, transitions, and stairs your project as, the higher the cost per linear foot. These elements add to the price because cables should always terminate om 90-degree corners. This means that you will need a termination post, such as an end post or a corner post, along with all the necessary hardware to stop the cables and then start them again in the next direction.

We stop and start new runs of cable at each corner so the cables maintain proper tension. In order to meet building codesand to provide a safe barrier, a cable railing need to be tensioned correctly.Furthermore, the tension keeps the cables straight. If you try to bend the cables around a corner, they will become loose over time and require frequent maintenance.

For an example of how shape determines the price of a railing, take a look at these two projects. While we used the same railing design for both projects and they have the same total linear footage, they vary in cost. The more complex a project, the more it costs to design and fabricate the cable railing.

2 Different Deck Railing Layout Patterns: Deck A has lots of corner and end posts. Deck B is cheaper per linear foot because it’s a straight layout and uses fewer posts.

Material selection can also make a huge difference when it comes to cable railing cost. Each material that we work with has its own price point. In general, this is how post material costs compare:

Similarly, top rails come in a variety of materials and in different shapes and sizes. Like the railing post materials, each top rail material has its own pricing:

In addition, the larger the diameter of a top rail the more it will cost per linear foot. Adding complexity to the top railing will also add to cost. For example, custom profiles and curved top rails will add to the complexity of the rail. At an additional cost, Keuka Studios can also design custom top rails to fit a stair transition.

Thinking of submitting a request for a quote but not sure which cable railing post style you like best? Feel free to request multiple quotes and compare pricing between styles, materials, and finishes.

Our standard heights are 36” and 42” tall, though we can also make posts with custom heights depending on your local building codes. A standard 36” tall cable railing uses 11 infill cables and a 42” tall cable railing uses 13. In general, you can expect a 42” tall railing to cost approximately 18 percent more per linear foot than a 36” tall railing. A taller post will require more cables, more cable fittings, and additional post material.

Lastly, the diameter of the cables used for the railing infill slightly changes the price of the railing.On average, you can expect to spend around $.50 per linear foot for 1/8” diameter stainless steel cable and around $1.00 per linear foot for 3/16” diameter stainless steel cable. Multiply this by 11 cables for a 36” high railing and 13 for a 42” high railing and you can expect to spend $5.50 – $11 or $6.60 – $13 per linear foot for the cable alone. We offer 1/8” stainless steel cable fittings and 3/16” stainless steel cable fittings at the same price. Upon request, we also offer specialty fittings for larger cables, for example, cables with a 1/4” or  5/16” diameter.

Tradesman discounts are available. A standard 15% discount is offered to builders and architects and further discounting is available for large projects. Request a quote today for more details. All cable railing projects are subject to a $5,000 minimum order.

Cable deck railing checks all of the boxes. It keeps everyone safe, maximizes the view and can be quite stylish too. But at $65 to $150 per linear foot for pro installation, it is one of the most expensive deck railing types along with glass deck railing.

Also called cable deck railing and cable wire railing, it is an interesting alternative to standard decks railing made completely from wood, aluminum and composite.

Cable railing systems include posts and top rails made from your other material options. It is the guard rails that are made from high-strength cable, also called braided wire. The cables are usually installed horizontally, but vertical cabling is a slightly more costly option.

Your best long-term option is stainless steel railing, but galvanized cable is available too. Appearance is another factor, as stainless stays brighter longer. Galvanized darkens, and some homeowners prefer it’s more subdued appearance.

Cable deck railing cost factors are listed to the left. These are not hard-and-fast rules for cost, but they give you an idea of what’s included in Low / Average / High cost tiers.

Feeney has all the accessories to complete the project including options for cabling, post caps, base plates and touchup paint. Feeney’s cable tension gauge is a very handy tool to have for pros and DIY homeowners regardless of what brand you select.

Fortress Cable Rail is a high-end brand with stainless steel cabling and powder-coated posts and rails in a variety of colors and several attractive series.

Both horizontal and vertical cable panels are offered along with stair panels and prefab steel gates. As with most brands, 36” and 42” heights plus 6’ and 8’ panels are manufactured. All installation supplies and accessories are available from Fortress Rail.

While the components needed to create panels cost less than pre-fab panels, installation costs might be more if you hire a professional installer because it will take more time to build your cable deck railing system.

Westbury VertiCable Railing specializes, as you might guess, in pre-assembled and pre-tensioned panels with vertical cable. Powder-coated colors include 3 stock and 9 special order tones. Panels are all 36” high, and widths include 4’, 5’, 6’, 7’ and 8’. Gates and stair panels are produced too along with all post types needed. This is a mid-priced option.

TimberTech is a leading manufacturer of composite decking and railing. The company also offers cable railing with composite framing and Feeney stainless steel cabling.

Another components brand isAtlantis RailEasy. It manufacturers top tubular steel rails with a chrome finish, stainless steel cable and installation accessories.

Most homeowners choose cable deck railing manufactured in pre-fab panels. Deck Professionals encourage their use over building railing from components too, because the job goes quicker and more smoothly.

Who you Hire: If you DIY, then your deck costs will include any tools required to get the job done – usually around $500. When hiring a pro, handyman services usually charge less than deck contractors. But be sure that the installer is experienced with the brand and style of cable deck railing you purchase.

Permit Cost: Most decks that require a deck railing also require an inspection to ensure the rail is securely installed for safety. Permits vary by city/county and often are priced by the size of the deck. The bigger the deck, the more railing is needed and the longer it takes to inspect it.

Most homeowners don’t have the tools like cable tighteners and tension gauges that it takes to successfully complete a cable deck railing installation. If you don’t get the cables tight, they’ll droop, which affects the appearance. And they likely won’t pass inspection.

While the tools are available and experienced homeowners can complete the job with professional-looking results, hiring an experienced pro makes the best sense for this deck railing project.

A. Prefab panels cost less per linear foot the longer they are. A product that costs $550 for a 6-foot panel, or about $92 per linear foot, might cost $680 for an 8-foot panel, or about $85 per linear foot.

A whole cable railing system, including posts, handrail, cable, and hardware, costs about $75-$220 per linear foot. Railing Costs vary depending on material

Established in the year 2005 at Pune,Maharashtra, We Super Steel Impex are Sole Proprietorship based firm, involved as the Manufacturer of Stainless Steel Railing,Stainless Steel Stool,etc. All our products are getting widely acclaimed among the large clientele for their exclusive designs, superior quality, and reliability. Apart from this, our ability to maintain timelines as well as quality in the assortment, providing cost effective solutions and assurance to make timely shipment of the orders placed by customers have assisted us positioning our name in the list of top-notch companies of the industry.

Stainless steel wire ropes are the finest choice for maritime applications because they have stronger corrosion resistance to saltwater than other ropes. Meanwhile, other wire ropes" bright appearance will fade with time, whereas stainless steel wire rope will remain bright and modern for years. As a result, they are commonly utilized in modern display and architectural applications, such as railings, architectural cables, cable balustrades, handrails, and so on.

Stainless steel wire rope is usually constructed of 304 or 316 stainless steel. Here"s a quick rundown on why stainless steel wire rope makes the best choice.

The 316 materials are the most corrosive-resistant and are commonly utilized in high-corrosion settings and regions where salt spray is common. However, 316 stainless steel has around 10% less strength than 304 stainless steel.

One product has multiple uses: It is beneficial to add stainless steel cable wire at your place as it would be the best way to get your hands on a reliable product. Now with our steel cable wire ropes, you do not have to worry about corrosion and the weather conditions of your area.

Cost-effective Solution: Stainless steel wire rope manufacturers frequently recommend it above other cable construction materials. But what"s noteworthy about stainless steel stranded wire is that its low maintenance, longevity, availability, and ease of use and installation make it more affordable than more expensive alternatives like tungsten. As a result, stainless steel"s mechanical malleability, as well as its longevity, its widespread availability, makes it excellent for a wide range of applications.

Another advantage of stainless steel wire is that it is simple to work with when compared to other materials. It is quite easy to form, especially in the small-diameter wires that run through the cable. Furthermore, when stranded, stainless steel mechanical cable is simple to lay into the desired shape.

Complete cable railing assembly kits are available and include everything you need (angled railings may require additional hardware) for installation. All of our assemblies are available in 1/8", 3/16", and 1/4" diameters of stainless steel type 316 wire cable. The 1x19 construction creates a semi-rigid feel with minimal stretch. It can be used for most railing applications as it can be safely bent up to 45°. A 7x7 construction is available for more decorative uses where the ability to bend greater than 45° is needed. All of our cable rail systems can be machine swaged or hand swaged.

Cable railing cost will vary depending on size and style and installation method. Machine swage systems require more exact cable measurements when ordering, but do not require a swaging tool for installation. Hand swage systems offer more flexibility because exact cuts are made during installation.

Our cable railing assemblies are intended to run horizontally from a fixed end, through intermediate posts, and secured or tensioned at opposite end posts.

We suggest choosing an assembly that includes a turnbuckle, as it will allow you to easily tension the cable if it begins to sag over time. Although it is not structurally necessary for cable runs less than 28", including a turnbuckle in your assembly can also increase your cable span allowance to up to 50". Adding an additional turnbuckle can increase your run span even more.

Configuring the location of your end and intermediate posts is the first step in configuring your cable railing system design. This is necessary in order to determine your cable length, number of cables and assemblies, and any additional hardware necessary for attaching to the post, rounding corners, and accommodating angled runs. We recommend installing posts prior to gathering cable measurements.

End posts in stainless steel cable railings are located at each starting and stopping point for each cable run. The distance between the starting end post and the terminating end post is considered one cable span. Typically, end posts for deck cable railing is placed at least 3"- 4" away from the house or wall to allow access for attaching cable end fittings. Corner posts commonly refer to the post located at each change in direction. A complete assembly (end fitting, cable, and if applicable, a turnbuckle) is needed for each cable span.

Intermediate cable railing posts do not support any tension load, as their primary functions are to keep the cable spread and to support the cap rail requirement. Recommended maximum intermediate cable rail posts spacing is 4".

The end and corner posts in cable deck railing systems must be strong enough to support the tension of the cable assemblies (typically 350 lbs. per cable assembly). Our wire railing systems will work with wood or metal posts. Composite posts are not recommended as they can warp when the cables are tightened.

Requirements for rail height and horizontal cable spacing will determine the number of cables and assemblies needed for each span of your cable rail system. Typically, the rail height must be a minimum of 36" from the surface for residential uses and 42" for commercial uses. Stair or grip cable handrail may have different requirements. Most codes recommend horizontal cable to be spaced no more than 4"on center apart. Spacing should be targeted at 3" in order to meet a 4" code for wire deck railing. Construction codes will vary between city and county.

Cable attachment refers to the method by which the railing cable is secured to the fitting or turnbuckle. The cable can be attached, or swaged, to the fittings by three common methods: machine swage, hand swage swage/hand crimp, or mechanical/swageless.

While end fittings for a stainless cable railing is selected primarily based on style, consideration should be given to how the fitting will attach to the post. The three most common attachment methods include: face mount, through mount and tab/eye mount.

Tensioning steel cable railing is critical during the initial set up and adjustments may be needed overtime as the cable may stretch. Generally, cable railing for decks, stairs, etc. is recommended to be tensioned at 350 lbs. in order to maintain the integrity of the railing and to meet standard code. For shorter runs, a threaded terminal will also allow you to tension the cable when needed.

Choosing cable railings for decks, platforms, stairways and docks will vary depending on the size and scope of your project. Because there are so many variables, we ask that you call and speak to one of our cable railing supplies specialists to order your assemblies. This will ensure you order the correct wire deck railing and hardware for your needs.

Alibaba.com brings to you a comprehensive selection of durable and decorative railing stainless steel cable for all types of decorative and functional purposes. These sturdy, trendy and beautiful railing stainless steel cable are used for all types of interiors as well as in outdoor locations such as gardens. Trusted suppliers and wholesalers offer these fantastic railing stainless steel cable at the most cost-effective prices and attractive deals.

Modern railing stainless steel cable are offered on the site, in several distinct designs. railing stainless steel cable are made from quality materials that guarantee long durability and performance over time. Materials used include pure aluminum, stainless steel, PVC and rigid glass. They are easy to maintain and not prone to damage. These railing stainless steel cable are designed to be easy to install. These products are equipped with good tensile compression and impact resistance qualities that make them a great fit for guardrails and fencing requirements.

Alibaba.com offers different varieties of railing stainless steel cable that are available in multifarious designs, colors, sizes and thicknesses. This ensures that there is something perfect for every requirement on the site. These railing stainless steel cable are equipped with many brilliant features such as anti-collision and additional LED lights. Some of the varieties available on the site include stair railings, porch railings and deck railings. These may be mounted to the floor or wall. railing stainless steel cable from the site are sure to elevate the style of the space in which they are used.

Alibaba.com offers marvelous railing stainless steel cable that meet your needs and budget. railing stainless steel cable suppliers and manufacturers are sure to want to purchase these for their future needs. Place bulk orders and spruce up the architecture of your space today.