stainless steel wire rope end stop clamp ring in stock

Heavy Duty Wire Rope Ring Clamp is also called heavy-duty wire grip/wire stopper, which is made from SS316 marine grade stainless steel for maximum corrosion resistance and durability. It’s stronger than the standard wire rope grips, so the grip can be used for heavy-duty applications indoor and outdoor. The clamp can be quick and easy to install with the hex head key.

Wire Rope Ring Clamp is also called wire rope end stop clamp, wire rope loop clamp, which is made from 316 marine grade stainless steel for maximum corrosion resistance and durability. The unique design will make the grip a good appearance and easy to install. It’s an ideal choice for cable systems of balustrade, rigging, construction. Sizes from 3mm to 8mm and can bespoke.

Our Steel Wire Rope End Stop Clamp rings are made from A4 - AISI 316 Stainless Steel, marine grade making them tough, durable and corrosion resistant.

These wire rope end stop clamp rings are manufactured using A4 AISI 316 marine grade stainless steel, making them durable, long-lasting and corrosion resistant.

Manufactured from A4 AISI 316 marine grade stainless steel, these clamp stoppers offer great durability and corrosion resistance for use in all environments.

Stainless steel cable stop / clamping ring, with radially-inserted Allen screw, for rope diameters 3 and 4 mm. Pressure base and pressure plate of the Allen screw with special geometry for particularly high clamping forces. Keeps traction slip-free up to about 200 kilograms. Cable stops with an additional slot/port (for subsequent mounting) are also available at an extra charge; please inquire if needed. >>> Price

The cable stopper is used to keep wire ropes on free-standing frames, garden trellises, pergolas, etc.. permanently tensioned. The middle or intermediate posts of a wire frame system can also be firmly coupled with the tensioned ropes, and thus stabilised. It can also be used as a "rung" on ropes to provide additional support for the plants. The stopper can be loosened/detached to re-tension the wire rope. Please refer to our general information on cable clamps for extra support as needed.

We recommend *not* cutting the ropes exactly to size beforehand, but leaving a projection of 20 - 50 cm... or rather, to work "from the reel." First, thread the stopper on the cable. Then grip the cable with a mounting vice or similar, tighten it manually, push the stopper up to the post, hold it in this position, and screw it on. If the rope is inserted several times through posts or the like in large climbing installations, deformations can occur at the end of the rope (e.g. by folding over individual rope strands). A piece of rope (2 - 3 cm) may then need to be cut off again using wire rope cutters to get a clean cut before threading on the next clamping ring.

Then grip the cable with a machine vice (or similar) and tighten it manually. Wire ropes need to be cleanly cut and un-crimped for being able to push the stopper on; you may check whether you need special wire rope cutters. Push the stopper all the way to the stop (wooden post) or whatever you are assembling on. Keep in this position and tighten the setscrew of the clamp. In order to keep the stopper from moving or tilting whilst tightening, we suggest a second vice to hold the position of the stopper (see photo). The rope is then cut off with a projection of approx. 10 cm. and secured against unraveling with an end sleeve.

Use a Wire Rope Stop Clamp for marine applications, including sailboat and yacht cabling, as well as shade sails and architectural structures. Stop clamps function as a stopping point along the wire cable and are useful in wire-hung canopies to prevent the fabric from sliding farther than desired along the cable. Tighten the set screw using a 5mm allen wrench, available at your local hardware store.

Please Note: When using this hardware, it is your responsibility to make sure the finished structure is built in accordance with local building codes and that, given those codes, proper hardware is being used.

Wire rope clip is otherwise known as a wire rope clamp, wire cable clamp, wire clamp, wire clip, U-bolt, etc. It is widely used for making eye-loop connections or join two wire rope cable ends together. The traditional styles of wire rope clips usually have three components: a U-shaped bolt, a forged or cast iron saddle, and two nuts.

The wire rope clips are available in a range of sizes and finishes, while you can easily find the difference from the appearance, traditional wire clips with u bolt, saddle and nuts, fist grip, stamped cable clamp.

Cast and malleable wire rope clips can only be used under light duty loads applications with relatively light loads, such as handrails, fencing, guard rails, etc.

While the drop forged wire rope clip variety is recommended for important, critical or sustaining overhead loads, such as guy lines, support lines, scaffolding, etc. The drop forged wire rope clips can be used in critical suspending, guying, and tie-down applications for the die forging process make them strong and more durable and the heating and hammering steps make their structure to be consistent and conform to the shape of the forged item.

Simplex and duplex cable clamps are also known as single stamped wire clip and double stamped cable clip are composed of stamping plate, saddle, and bolts, feature an aesthetic design, used for outdoor light duty applications.

Wire rope clips are available in a variety of materials and finishes but basically three types of materials, carbon steel, cast, malleable iron, and stainless steel.

Carbon steel wire rope cable clamps are galvanized, or hot dipped galvanized, the galvanised metal wire clamp has an added zinc layer to prevent rusting and protect against scratching and the addition of carbon corresponds with an increase in the hardness and strength of wire rope cable clamps. G, but stainless steel wire rope clamps are the best choice for corrosion-resistant applications that can be used for saltwater environments.

Commonly wire rope clamp installation is very simple, there’s a well-known saying can help you remember how to attach wire rope clips, that reads “never saddle a dead horse.” Just follow the recommendation ways:

Keep three or more wire rope clips attached at the end of the wire rope dead end, space between each wire rope clip should be at least 6 times the wire rope diameter.

You can see the correct and incorrect ways of installation from the following pictures and find how many wire rope clips to use at one wire rope loop.

The saddle shall be placed on the live end of the wire rope, with the U-bolt on the dead-end side—Remember the well-known saying: “Never saddle a dead horse.” Use at least two or three wire rope clips to secure the ends properly to the length of the rope, and tighten nuts evenly one by one until reaching the recommended torque.

If you have any wire rope clips questions, you can contact us by email at info@hilifting.com. We will be glad to share with you more useful information.

On the other hand, if you would prefer to work with drilling and welding for your pet projects, you may browse our massive selection of metal clamps and welding clamps. The metal clamps will provide a more durable option to the other wire rope clamp ring you can find on the market! Find the most suitable product for your needs and level of expertise today on Alibaba.com and get free shipping and further discounts on your purchase!

Buy wholesale wire rope clamp ring made from quality materials and shipped out by some of the leading manufacturers in the industry on Alibaba.com! Fix that leaky pipe in your toilet with a pipe clamp you can get with just a few clicks away! Get a hose clamp to stabilize or seal your hose configuration at home on Alibaba.com. Meet all your wire ropeclamp ring needs and more when you shop online for additional perks such as shipping options and further discounts on your purchase!

Murphy offers many sizes of wire rope clips in 4 different fabrications: zinc plated, stainless steel malleable, galvanized drop forged, and stainless steel drop forged.

You can use wire cable clips to secure the loose ends of your wire ropes. They often have nuts, u-shaped bolts, and cast saddles. You can put the wire rope in the bolt and then place the saddle over the bolt’s rope. By using the nuts, you can then secure the rope in its place.

There are a couple of ways to make the process stronger. For example, if you have a cable coated with vinyl, then you can take off the vinyl in the place where you put it in the wire rope clip.

We offer our clips in a range of materials, which gives you more options. You can use the clips for semi-permanent or permanent applications, or just temporary ones. You can use your hand tools to secure them to your stainless steel wire rope. They are also cost-effective.

You can count on our company to offer sturdy and long-lasting clips, so you can secure your loose ends well. We have good knowledge of the requirements of various industries, allowing us to offer you the best products. You can expect our wire rope clips to last for a long time.

With so many different kinds of rope clips and ropes to choose from, we know making a choice can be difficult. Luckily, Murphy Industrial Products, Inc. is here to help. Feel free to contact us today if you want to know more about our stainless steel wire rope clips and related products.

Welcome to buy the newest and competitive price DAWSON Stainless Steel Stopper on Wire Rope, Wire Rope Ring Clamp from our factory. We"re one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.

Hot Tags: Stopper on Wire Rope, Wire Rope Stopper, Stainless Steel Wire Rope Stopper, Wire Rope End Stop Stopper, SS Wire Rope Ring Clamp, Stainless Steel Wire Rope Stopper Clamp Ring, Wire Rope Stopper Clamp Ring, Wire Rope Ring Clamp, Stainless Steel Wire Rope Ring Clamp, Stainless Steel Stopper on Wire Rope, SS Wire rope end stop stopper, China Stainless Steel Wire Rope Stopper, Stainless Steel Wire Rope Stopper Clamp Ring Supplier