stainless steel wire rope loop clamps quotation

We offer wholesale wire rope loop clamp to take any truck"s engine to the next level. The wire rope loop clamp available can address the issues in the truck"s operations, allowing a smoother ride.

2. (A) All goods supplied by us shall remain the sole and absolute property of us until such time as the customer shall have paid us the agreed price together with the full price of any other goods the subject of any other contract with us.

8. If the buyer shall make default in or commit a breach of the contract, or of any other of his obligations to the seller, or if any distress or execution shall be levied upon the buyer’s property or assets, or if the buyer shall make or offer to make any arrangement or composition with creditors, or commit any act of bankruptcy, or if any petition or receiving order in bankruptcy shall be presented or made against him if the buyer is a limited company and any resolution or petition to wind-up such company’s business (other than for the purpose or amalgamation or reconstruction) shall be passed or presented, or if a receiver of such company’s undertaking, property or assets or any other part thereof shall be appointed, the seller shall have the right forthwith to determine any contract then subsisting and upon written notice of such determination being posted to the buyer’s last known address any subsisting contracts shall be deemed to have been determined without prejudice to any claim or right the seller may otherwise make or exercise.

2. (A) All goods supplied by us shall remain the sole and absolute property of us until such time as the customer shall have paid us the agreed price together with the full price of any other goods the subject of any other contract with us.

8. If the buyer shall make default in or commit a breach of the contract, or of any other of his obligations to the seller, or if any distress or execution shall be levied upon the buyer’s property or assets, or if the buyer shall make or offer to make any arrangement or composition with creditors, or commit any act of bankruptcy, or if any petition or receiving order in bankruptcy shall be presented or made against him if the buyer is a limited company and any resolution or petition to wind-up such company’s business (other than for the purpose or amalgamation or reconstruction) shall be passed or presented, or if a receiver of such company’s undertaking, property or assets or any other part thereof shall be appointed, the seller shall have the right forthwith to determine any contract then subsisting and upon written notice of such determination being posted to the buyer’s last known address any subsisting contracts shall be deemed to have been determined without prejudice to any claim or right the seller may otherwise make or exercise.

Wire Rope Clips are efficient metalware for installing loop ends on a cable assembly. Wire Rope Clips are constructed for maximal holding strength. SKUWire ØReq. QtyQty/Pkg K-34-03-25K 1/16” - 3/32” 2 25

Hilifting is a professional stainless steel wire rope clips manufacturer, our simplex stainless steel  wire rope clips is simply loop, the cable clamps each side of the threaded bolt and tighten down the plate using a suitable spanner, we also have duplex wire rope clip for your option.

Wire rope clips, also called wire rope clamps, consist of a U-shaped bolt, a metal saddle piece, and two nuts. They are used in wire rope loop assemblies and are ideal for field installations. We offer several models to meet your specific needs.

Although Carl Stahl Sava Industries is known for producing the world’s tungsten, stainless steel and galvanized steel mechanical cable, exotic wire rope materials remain a less common, yet critical member of our family of cable offerings. Nitinol, titanium, Vitallium®, Inconel® and Molybdenum round out Sava’s compliment of specialty mechanical cable materials...

Type 304 stainless steel U-bolt wire rope clips are most often used in rigging applications to secure the wire rope on the turn back and are ideal for use with moderate load applications. Please refer to the instructions below for more information on wire rope clips.

Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Tighten nuts evenly, alternating from one nut to the other until reaching the recommended torque.

When two clips are required, apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten.

When three or more clips are required, space additional clips between first two—take up rope slack—tighten nuts on all clips, alternating from one nut to the other until reaching the recommended torque.

The number of clips shown is based upon using RRL or RLL wire rope, 6 x 19 or 6 x 37 Class, FC or IWRC, IPS or XIP. If Seale construction or similar outer wire type construction in the 6 x 19 Class is to be used for sizes 1″ and larger, add one additional clip The number of clips shown also applies to rotational-resistant RRL wire rope, 8 x 19 Class, IP, IIP, sizes 1-1/2″ and smaller, and to rotation-resistant RRL wire rope, 19 x 7 Class, IPS, IIP, sizes 1-1/2″ and smaller. For other classes of wire rope, additional clips may be necessary. Length of rope turn-back should be increased when more clips are used. Efficiency ratings for wire rope end terminations are based upon the breaking strength of wire rope. The efficiency rating of a properly prepared loop or thimble eye termination for clip sizes 1/8″ through 7/8″ is 80% and for sizes 1″ through 1-1/2″ is 90%. In accordance with good rigging and maintenance practices, the wire rope end termnation should be inspected periodically for wear, abuse and genera adequacy.

ODWAC-22 Drop wire clamp (ftth drop cable clamp) is a widely used fitting for drop cable in outdoor FTTH application. It is light-weighted and have compact design.

Suncor’s wire rope clips and clamps are available in sizes ranging from 1/16″ to 1-1/4″ for all projects, large or small. They are made from grade 316 or grade 304 stainless steel for corrosion resistance and durability and are ideal for marine, industrial and architectural wire rope projects.

We also offer a complete line of wire rope tools and stainless steel accessories including wire rope cutters, thimbles and turnbuckles. For more information, be sure to read our helpful Wire Rope Load Limit and Turnback Guide.

Manufacturer of wire rope clips made from stainless steel and die-cast zinc materials. Grip and U-bolt clips are offered. Available in various wire rope diameters with drop forged, hot galvanized, self-colored and zinc plated finishes. Suitable for tillers and cables. Clips are also distributed. Serves the transportation, mining, railroad, construction, architectural, fitness, automotive, marine, OEM, military, display, signage, lighting, security and recreation industries. Some clips meet military specifications and are made in the USA.

MIZKEN INC. offers an extensive range of high quality stainless steel Wire Ropes and Wire Rope Fittings with many different sizes to choose from.　Our Wire Rope connectors include various swageless terminals, clips and clamps.　You will find the exact one to fit the place and fulfill the purpose you intend to use from our wide range of our products.

They are mainly made from 304 Stainless Steel, which is the most commonly-used stainless steel.　And we also supply some products made from 316 Stainless Steel having more excellent corrosion resistance than 304 Stainless Steel.　They have high corrosion resistance and durability, so they are suitable for a wide range of industries.　We have a perfect confidence in quality of our stainless steel products.　And our products are well-known for our reliability due to its long history of achievements.

We offer 2 basic constructions of wire ropes; 7×7 construction and 7×19 construction.　7×7 construction wire rope is the most commonly-used wire rope having standard specifications.　On the other hand, 7×19 construction wire rope has more flexibility but less tensile strength compared with 7×7 construction wire rope.

When you will make an inquiry about Wire Rope, please let us know the details of your requirements including construction, diameter, length, expected load, temperature of the place where you intend to use the wire rope and so on.　It will be helpful for us to offer the suitable one for you.　And, we can process the edges of the wire ropes like eye splice processing according to your request.