stainless steel wire rope specifications quotation

Type 304 stainless steel is the standard alloy for use in wire rope and cable. It has about the same strength as galvanized rope or cable but is much more corrosion resistant. It can be used in most industrial atmospheres and has acceptable corrosion resistance when used in marine and salt water.

Type 316 stainless steel is the standard high corrosion resistant steel for rope and cable. It is resistant to many chemicals in the pulp and paper, photographic, food processing and textile industries. It has the best pitting resistance in marine and salt water and can be used in temperatures up to 480ºC (900ºF).

stainless steel wire rope specifications quotation

An importantpoint to consider is the selection of the proper type of core needed in the rope. Wire Ropes are made with either fiber core or steel wire core.

This center is usually composed of a separate 7×7 wire rope designated as IWRC. The steel core increases the strength by 7% and the weight by 10%. These steel cores provide more substantial support than fiber cores to the outer strands during the rope’s operating life. Steel centers resist crushing, are more resistant to heat and increase the strength of the rope.

The Design Factor being both the ratio between the minimum Breaking load of the rope and the rated capacity (RC) tells at what percentage of its ultimate strength a wire rope is operating. The Design Factor takes into consideration both normal rope wear and potential stresses in various applications. The best practice in determining an adequate design factor is to analyze the specific conditions involved inn each individual installation. The following example shows how to determine the Design Factor: If a rope is working under a max. operating load of 10,000 lbs. and is having an ultimate strength of 50,000 lbs., the factor is 5 which means it is operating at 20% of its ultimate strength.

The fleet angle is the angle formed between the rope running to or from the extreme left or right of the drum and a line drawn from the center of the sheave normal to the axis of the drum. For optimum efficiency, the angle here should not exceed 1 1/2 degrees for a smooth drum, or 2 degrees for a grooved drum. If the fleet angle is larger than the recommended limits, it can cause bad winding on smooth drums and rubbing against the flanges of the grooves. Too small a fleet angle should also be avoided since it will cause the rope to pile up against the flange head.

Proper alignment of sheaves is essential. The main sheave should line up with the center of the hoisting drum, otherwise both the rope and sheave flanges will be subjected to severe and rapid deterioration will occur. If rope speeds are high, sheaves should also be balanced.

Wire rope products will break if abused, misused or overused. Regular inspection and maintenance are necessary. Consult industry recommendation and OSHA standards before using.

stainless steel wire rope specifications quotation

Suncor Stainless offers a complete line of stainless steel wire rope for marine, industrial and architectural applications. All of our stainless steel wire rope is made from 316 and 304 stainless steel. Our wire rope product line also includes both black PVC coated wire and white PVC coated wire. Suncor’s wire rope is available in a variety of diameters and three potential constructions. These diameters range from 1/16″ to 1/2″. Cable constructions are offered in 1×19, 7×7 or 7×19, where 1×19 is the strongest and most ridged and 7×19 is more flexible and stretches.

Suncor also offers a complete line of wire rope accessories including wire rope cutters, turnbuckles, clips, sleeves, swage turnbuckles and terminals.

stainless steel wire rope specifications quotation

Sta-Lok stocks a comprehensive range of stainless steel grade 1.4401 (AISI 316) wire rope on 100,200 and 300-metre reels. Conforming to international standards, all wire is certified and fully traceable, in line with our quality systems and ISO 9001 accreditation. Learn how to choose the right wire rope here: Wire Rope Properties.

stainless steel wire rope specifications quotation

Grade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to 302 stainless steel. And the 202 Stainless Steel Wire Rope has many excellent properties such as high-temperature resistance, good fatigue resistance, and long service life. Stanford Advanced Materials (SAM) has rich experience in the manufacture and sale of the 202 Stainless Steel Wire Rope and provides customers with high-quality202 Stainless Steel Wire Ropeat a competitive price.

stainless steel wire rope specifications quotation

There are a lot possibilities for every winch and every application. So feel free to ask the Gebuwin specialists for advice. Gebuwin supplies cables in a galvanised and a stainless steel version with various thicknesses and lengths. A common application is with a hook or eye. If desired, it is also possible to use the synthetic versions on your winch. In short, in most cases we can meet your requirements.

Price mentioned above is the base price for the wire rope with hook. Additonal costs per meter is €2,44. Calculate your price by multiplying the requested number of meters times the meter price + the base price.

stainless steel wire rope specifications quotation

There are a lot possibilities for every winch and every application. So feel free to ask the Gebuwin specialists for advice. Gebuwin supplies cables in a galvanised and a stainless steel version with various thicknesses and lengths. A common application is with a hook or eye. If desired, it is also possible to use the synthetic versions on your winch. In short, in most cases we can meet your requirements.

Price mentioned above is the base price for the wire rope with hook. Additonal costs per meter is €13,85. Calculate your price by multiplying the requested number of meters times the meter price + the base price.

stainless steel wire rope specifications quotation

We understand that there are many factors that go into choosing the correct sling, wire rope, rigging hardware or lifting device for a lift! Let our sales team help!

stainless steel wire rope specifications quotation

Communication Cable 1)Application: for detection of fiber optic lines, to be used in low voltage circuits. 2)Material: HDPE insulated stainless steel cables 3)Construction of inside stainless steel...

Stainless Steel Wire Rope1) Material: AISI304 AISI316 2) Construction: 7x37, 1x37, 7x19, 6x19+FE, 1x19, 7x7, 6x7+FE, 1x7. 3)Diameter 0.27mm - 30.00mm 4) Packing: on reels 5) Standard: DIN3055 ...

6x7 (6/1) - Fibre Core Wire Rope6x7 construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly referr...

Coated Galvanised and Stainless Steel Wire Ropes We supply a full range of wire rope covered in a range of coatings including PVC, Polypropylene and Nylon as well as special coatings which we can cons...

Compacted Wire Rope Compacted Wire Rope has been subject to a compacting process suchas drawing rolling or swageing where by the metalic cross-sectional area of thewires remains unaltered whereas th...

Cable Inner Wire Thisis Inner Wire, available for Cars, Motorcycle, Tricycle, Bicycle. Etc. Wecan offer all kind of Inner wire. A:Φ8×10 Head 2.0mm Cable for MotorcycleB: Φ6×11 Head 1.5mm Cable for...

7x7 (6/1) - Wire Strand Core Wire Rope6x7 construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly ...

1x19 - Marine Grade Stainless Steel Wire Rope 1x19 AISI316 (304) stainless steel strand is a very poplar stainless steel construction. Used heavily throughout the marine industry, 1x19’s ex...

6x19 (12/6/1) - Fibre Core Wire Rope6x19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7x...

stainless steel wire rope specifications quotation

Here at Murphy Industrial Products, Inc., we offer a wide range of steel wire ropes to meet your needs. The advantages include being long-lasting and being able to withstand a variety of elements.

Steel is a metal that has different elements, making it able to resist corrosion well. Wire rope might have stainless steel in them, making them long-lasting. The material in the metal allows it to withstand harsh elements, such as salt spray. You can find many configurations of the rope, and it is not hard to form it into a mesh for various openings.

Of course, compared to other forms of rope, a wire is much more durable. You do not need to worry about it wearing down because of abrasion, as you do with other types of rope. Instead, it is easy for you to reuse the same string for a range of applications. You will find the investment is worthwhile and that you are happy you spent the money.

Are you looking for the right stainless-steel wire rope for your facility? Turn to Murphy Industrial Products, Inc. today. We are more than happy to help you find the best 3/8 stainless steel cable to get the job done. Feel free to contact us today if you would like to know more about our services and how we can help you. Our specialists are here and ready to assist you in any way possible.

stainless steel wire rope specifications quotation

We are one of the leading manufacturers and exporters of Stainless Steel Wire ropes which are made of stainless steel wire 304, 316. These ropes are efficientlyread more...