stainless steel wire rope swage fittings factory

SWR supply a wide range of stainless steel rigging components and stainless steel wire rope fittings. Within the range we offer high quality swage terminals such as swage studs, swage forks, swage eyes, swage toggles and swage rigging screws.

All fittings are manufactured to the highest standards, produced from marine grade AISI 316 and after correct installations these swage fittings maintain 90% of the breaking load of stainless steel wire ropes and strands whilst achieving aesthetically pleasing finishes.

Swage fittings are wire rope components other than swage or stop sleeves, that are attached to the wire by compressing, (swaging) the fitting on to the wire. When swaged properly, most wire rope fittings can hold up to 100% of the wire strength, thus allowing assemblies to meet the various working load limits required on assemblies that must be proof load tested. These fittings can be utilized on a wide variety of cable assemblies with many uses. Common types of swage fittings are plain balls (BAS or NAS-949 type), single shank balls, (MS20664 type), stake eyes, aircraft and marine swage eyes and fork ends (MS20668 and MS20667 type.).

Choose One#1a 1/8in Acorn/Hex/Washer/Metal Post w/ one end swaged & 1 Tensioner + 1 Terminal#1b 1/8in Acorn/Hex/Washer/Wood Post w/ one end swaged & 1 Tensioner + 1 Terminal#2a 3/16in Acorn/Hex/Washer/Metal Post w/ one end swaged & 1 Tensioner + 1 Terminal#2b 3/16in Acorn/Hex/Washer/Wood Post w/ one end swaged & 1 Tensioner + 1 Terminal#3 1/8in Quicknut/Cover w/ one end swaged & 1 Tensioner + 1 Terminal#4 3/16in Quicknut/Cover w/ one end swaged & 1 Tensioner + 1 Terminal#5a 1/8in Acorn/Hex/Washer/Metal Post w/ both ends swaged & 1 Tensioner + 1 Terminal#5b 1/8in Acorn/Hex/Washer/Wood Post w/ both ends swaged & 1 Tensioner + 1 Terminal#6a 3/16in Acorn/Hex/Washer/Metal Post w/ both ends swaged & 1 Tensioner + 1 Terminal#6b 3/16in Acorn/Hex/Washer/Wood Post w/ both ends swaged & 1 Tensioner + 1 Terminal#7 1/8in Quicknut/Cover w/ both ends swaged & 1 Tensioner + 1 Terminal#8 3/16in Quicknut/Cover w/ both ends swaged & 1 Tensioner + 1 Terminal#9a 1/8in Acorn/Hex/Washer/Metal Post w/ one end swaged & 2 Tensioners#9b 1/8in Acorn/Hex/Washer/Wood Post w/ one end swaged & 2 Tensioners#10a 3/16in Acorn/Hex/Washer/Metal Post w/ one end swaged & 2 Tensioners#10b 3/16in Acorn/Hex/Washer/Wood Post w/ one end swaged & 2 Tensioners#11 1/8in Quicknut/Cover w/ one end swaged & 2 Tensioners#12 3/16in Quicknut/Cover w/ one end swaged & 2 Tensioners#13a 1/8in Acorn/Hex/Washer/Metal Post w/ both ends swaged & 2 Tensioners#13b 1/8in Acorn/Hex/Washer/Wood Post w/ both ends swaged & 2 Tensioners#14a 3/16in Acorn/Hex/Washer/Metal Post w/ both ends swaged & 2 Tensioners#14b 3/16in Acorn/Hex/Washer/Wood Post w/ both ends swaged & 2 Tensioners#15 1/8in Quicknut/Cover w/ both ends swaged & 2 Tensioners#16 3/16in Quicknut/Cover w/ both ends swaged & 2 Tensioners

Wire rope swage sleeves and fittings are used to terminate the ends of wire ropes to prevent fraying, and to securely form lifting eyes in wire ropes. Cable swage sleeves and wire rope end fittings are very versatile and are an essential part of many wire rope rigging applications.

Here at Tri-State Rigging Equipment we pride ourselves on providing only the highest quality swage sleeves and wire rope end fittings to our customers, from only the most reputable manufacturers. We can provide you with any rigging equipment on the market, so if you cannot find what you are looking for or don’t know exactly what you need, call or email our sales team to speak with a rigging product specialist.

Wire rope swage sleeves, sometimes referred to as cable ferrules or duplex / crimp sleeves, are used to form eyes on the end of wire ropes. Wire rope swage sleeves are a more secure and more permanent alternative to wire rope clips. Cable swage fittings and sleeves are available in a variety of materials to fit any wire rope rigging application:

To properly fit and secure a cable swage sleeve, most use a hydraulic swaging press, while others can be hand crimped using a special hand swage crimping tool. Cable swage sleeves are available in bulk, but we specialize in manufacturing them into complete wire rope assemblies.

These wire rope end fittings are used to allow wire rope to be used in a large variety of rigging applications. Wire rope end fittings are available in bulk, but we specialize in manufacturing them into complete wire rope assemblies.

Tri-State Rigging Equipment is a service provider and distributor for all wire rope cable swage sleeves and wire rope end fittings for rigging and lifting serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

Sleeve steel cable fittings are a type of cable end fitting, or termination. End fittings go on the ends of wire rope cables, where they keep the rope from fraying an, allow the end of a wire rope to be terminated in a loop—which is perfect for many weigh bearing and connecting applications.

Wire rope sleeve end fittings need to be swaged on in order to function properly. Swaged fittings either connect two rope ends together or terminate your wire rope, usually allowing a connection to something else

Sleeve end fittings are unique because they allow one to create custom sized loop ends for different lifting, actuating and supporting applications. The inside of the loop can also support a protective thimble of set size if one believes the assembly will be under heavy use.

Most sleeve end fittings are composed of copper, aluminum or stainless steel. If you’re interested in a non-standard material, feel free to discuss with us!

The only way to know for sure if sleeve end fittings are right for your application is to give us a call. Our knowledgeable staff members are waiting to discuss your specifications and help you determine the proper end fitting.

With that being said, swage sleeve fittings work on all sorts of wire rope assemblies, including wire rope lanyards, security lanyards, security cables, military cables, slings and more.

Here at Tyler Madison, we know that your applications and requirements are diverse. That’s why we offer such a variety of sleeve fitting sizes. Check out the chart above to see our standard cable swage fittings and other offerings. Don’t forget, though, that we always welcome specialized requests to make sure you receive the most suitable custom wire rope assemblies for your application.

Tyler Madison is a leading American wire rope manufacturer based out of Apple Valley, Minnesota. We create high quality wire rope fittings, wire rope lanyards, cable railing, wire rope tethers, wire rope swage fittings, swage sleeves and countless standard and custom wire rope cable assemblies.

Tyler Madison is energized by challenges! We have the capabilities and the know-how to create high-stakes wire rope assemblies and swaged cable fittings. These include aircraft cable assemblies, military cables, stainless steel medical cables and push pull control cables. From start to finish, we create your wire rope assemblies and wire rope loop ends using the latest technology and the best quoting practices.

Make Suncor Stainless your one-stop-shop for all your custom wire rope assembly needs. We stock a large variety of stainless steel wire rope and swage components to provide a quick turnaround on large and small custom assemblies for architectural, marine, industrial and military applications.

Suncor offers a variety of wire rope options and swage components to fit any project. We provide these services so you don’t need to make the large invest in the machinery required. Our capabilities also include the ability to swage large wire rope diameters.

Suncor Stainless is part of an elite ranking of companies in the U.S. Government’s Quality Manufacturer’s List (QML). Suncor has invested extensively in technology, manufacturing and testing to meet the government’s quality and testing requirements for aircraft control cable terminals and assemblies and as a result we are listed in QML-6117 and QPL-781 for these specific components. The 40 qualified stainless steel swage components that are listed in QPL-781 are left hand and right hand Swage Studs (Part # MS21259), Swage Eyes (Part # MS20668), Swage Forks (Part # MS20667) and Single Shank Balls (Part # MS20664C), with sizes ranging from 1/16″ to 3/8″.

Want us to provide your full assembly? Our architectural design team will collaborate with you to understand the cable and wire rope fittings you require for your application.

Once our team have helped to define the perfect components and confirmed the lengths for your wire rope assembly, our expert manufacturing team and in-house rigging team will get to work assembling your bespoke assembly.

Need assistance in specifying your cable requirements and knowing what wire rope fittings to use? Take a look at our guide on How To Order, Measure and Specify Your Wire Rope Assembly.

Rope Services Direct supply swaged terminals which act as terminations in wire rope fittings. This is to be used in conjunction with our popular wire rope, which we can supply in a huge range of lengths and diameters. While you can purchase the rope as standalone equipment, it is rare that you should have need for this alone.

These fittings provide a secure end termination for wire ropes. We have a wide variety to choose from. To make it suitable for a number of applications. Our swaged terminals are one such type of end termination. You can find all product information and contact details for ordering below.

The fitting has a hole at its centre in which the wire rope is positioned. An industrial press machine will apply tonnes of force to create a permanent connection between the rope and terminal.

Wire ropes need permanently connected fittings for certain operations. With just the rope alone, it doesn’t serve as many wide ranging and beneficial purposes.

Rope Services Direct can professionally fit your swaged terminal. We use industrial presses to apply the many forces required for a secure end fitting. If you do it yourself or by others who don’t know what they’re doing, you can’t guarantee a permanent or safe fitting.

This equipment is used in a variety of industries including architectural, marine & oil and gas as just a few examples. There is an excellent range of terminals which we can swage onto wire rope. so please ask if you require anything specific.

We have a wide ranging number of wire rope fittings available if a swaged terminal isn’t right for you. You can see our available stock here. Terminals that have been swaged are often used with other equipment. Such as turn buckles or rigging screws. If you are unsure which is the right selection of gear for you, please find our contact details below, where we will be more than happy to assist you.

We also provide swageless terminals, which achieve the same aim, except they are manually hand-fitted rather than being machine driven liked swaged terminals. However a swageless terminal may not be as strong. Although they do allow fitting whilst on site.

Swaged terminals require the work of professionals to ensure that only the most secure and permanent swaged fittings are created. We have our own wire rope riggers and all the right tools to complete any task. Our fittings come with a great choice of sizes. Our Wire ropes do too which ensures a perfect assembly.

Call Rope Services Direct on 01384 78004 and rely on us for the supply of the highest quality equipment and wire rope fittings. Alternatively, please find a full list of all of our contact details here.

Terminals are types of wire rope fittings which must be fitted to a wire-rope by a professional as specialist machinery is required. A terminal is machine pressed onto the very end of a wire-rope using many tonnes of pressure to ensure a professional and secure connection. Terminals are used for the connection of wire rope to a fixing point for securing, and are commonly utilised together with turn-buckles and rigging screws.Available from 3mm to 10mm in stainless or 3mm to 20mm in machined mild steel all of which can be pressed by our skilled team on our own presses.

Terminals are types of wire rope fittings which must be fitted to a wire-rope by a professional as specialist machinery is required. A terminal is machine pressed onto the very end of a wire-rope using many tonnes of pressure to ensure a professional and secure connection. Terminals are used for the connection of wire rope to a fixing point for securing, and are commonly utilised together with turn-buckles and rigging screws.Available from 3mm to 10mm in stainless or 3mm to 20mm in machined mild steel all of which can be pressed by our skilled team on our own presses.