stainless wire rope strength price

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire rope. The 6x19 Class wire rope is the most common class due to its good combination of flexibility and resistance to wear-and-tear. This diversity makes this wire rope suited for many different kinds of machinery or equipment. We also carry coils of wire rope in 2500" and 5000" lengths. Quantity ordered will be in a continuous roll. Specific lengths can be ordered for additional charges. Please call our sales team for pricing and availability. Check our Rigging Supplies and Marine Hardware category for a full line of rigging equipment such as shackles, wire rope, wire rope clips, etc.

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire r...

Stainless steel wire rope, sometimes called corrosion resistant, is generally used in applications that may degrade a bright wire or galvanized wire rope. The 6x19 Class wire rope is the most common class due to its good combination of flexibility and resistance to wear-and-tear. This diversity makes this wire rope suited for many different kinds of machinery or equipment. We also carry coils of wire rope in 2500" and 5000" lengths. Quantity ordered will be in a continuous roll. Specific lengths can be ordered for additional charges. Please call our sales team for pricing and availability. Check our Rigging Supplies and Marine Hardware category for a full line of rigging equipment such as shackles, wire rope, wire rope clips, etc.

1/2" wire rope is a solid choice for many rigging applications. With break strengths ranging between 10.3 tons (26,600 lbs.) and 14.6 tons (29,200 lbs.), this diameter of rope can be counted on to provide the high level of performance you require.

The standard finish has a lubricant coating to reduce friction and provide some protection from corrosion. The galvanized and stainless steel finishes provide additional corrosion-resistance.

The spin-resistant rope has an innovative design to help keep the cable from rotating while under a load. The inner strands are spun in the opposite direction as the outer strands.

US Cargo Control offers a full line of rigging supplies so you can find the perfect solution. Our selection includes additional wire rope options (ranging in diameter from 1/8" to 2-1/2"), guy wire, wire rope fittings, and general rigging hardware.

High-quality, durable product. I purchased this cable to use in a Warn 2500 lbs Winch on my Honda Foreman 500TRX. I was getting tired of replacing rusted fraying cables and wanted to go to stainless steel. I use my winch for both work and play. I tested this stainless cable pulling my machine out of mud holes as well as pulling trees and logs out of the bush to cut for firewood. So far it has exceeded my expectations. At 250 feet per roll, I can get 4-5 winch rope replacements at a fraction of the OEM cost.PROTIP: When cutting stainless cable use a grinder and a zipdisk to make a clean cut; using a shear or cable clipper will make an unnecessary mess and crush the strands.

Type 304 stainless steel is the standard alloy for use in wire rope and cable. It has about the same strength as galvanized rope or cable but is much more corrosion resistant. It can be used in most industrial atmospheres and has acceptable corrosion resistance when used in marine and salt water.

Type 316 stainless steel is the standard high corrosion resistant steel for rope and cable. It is resistant to many chemicals in the pulp and paper, photographic, food processing and textile industries. It has the best pitting resistance in marine and salt water and can be used in temperatures up to 480ºC (900ºF).

Semi-soft stainless steel cable for climbing aids, in various diameters, complete with inner strand made of stainless steel 1.4401 (AISI 316 - "marine grade / seawater resistant"), highly alloyed, A4. 7x7 wire strands rolled blank ("glitter`effect), without plastic coating. High "work-hardening" (via cold-working) of the individual wires.1.8 mm of cable: yield strength 90 kg (0.9 kN), ultimate strength 180 kg (1.8 kN),3 mm of rope: yield strength 250 kg (2.5 kN), ultimate strength 500 kg (5 kN),4 mm of rope: yield strength 500 kg (5.0 kN), ultimate strength 1,000 kg (10 kN).

sold by the metre (cut to length): a less expensive option as compared with reels and rolls. A roughly accurate cutting: If you enter "15 m," you"ll get a stainless steel cable between 15.01 to 15.03 m. To order several segments (e.g: 2 x 3.65 m, 3 x 1.20 m), enter the sum of all cable lengths in the shop, rounded up to the next meter. In the "comments" field, specify the individual rope lengths you desire. The cut is exact to the centimetre and does not lead to additional costs.

sold by the metre (in pre-assembled kits): here too, you will receive the quantity indicated in the parts list of the respective kit (e.g. "12 m") as one cable segment. Since each kit is packaged individually, it is also possible to cut the steel cable in several segments to the nearest centimeter. If you order additional components (mounts or extra cable for an extension piece, for example) to supplement a preassembled kit, you can write in the "comments" field at checkout that you would like to have the entire length of cable in one roll (for example, if you order a kit with a 12-metre cable and an additional 3-metre cable, we can deliver a 15-metre roll if you wish) and additionally ordered amount of rope (e.g. 3 m) should not be separate, but delivered attached to the standard length in the kit. We would then deliver 15 m as one length of rope, rather than 12m + 3m.

Installation instructions are available under each respective cable system. The final cutting of your cables is done during installation; special cable cutters can be purchased here. The stainless steel wire ropes are about four times harder than simple construction steel; cutting with bolt or side-cutters is extremely difficult if possible... a hacksaw or grinder (wrap insulating tape around the cut-off end, to prevent cable unravelling) can work. Caution: flying sparks when cutting may cause loss of resistance to corrosion and then cause rust at the meeting point with other stainless steel parts, such as wall brackets, etc.-- inviting rust! Each cable termination should project by about 10 cm (together with relevant elements-- end sleeves.) So with 1.8 mm rope, an overhang of 5 cm is sufficient.

Stock up on every variety of steel wire rods at the Alibaba metalworking store. Our listings feature wholesale steel rods from a network of dependable Chinese manufacturing partners. If you need to source steel rods for construction projects, you"ll find products that are robust and durable. And if you need welding rods, they are easy to find via our search engine. Track down the steel wire rope price you need at affordable prices at Alibaba.com.

What can you do with the steel wire rods available from Alibaba"s wholesale store? One common use for steel rods is in the welding sector. Steel works well as a welding rod material thanks to its high ductility, meaning that welds are relatively strong and long-lasting. Choose a low carbon rod and you"ll be all set for successful welds in industrial settings and workshops alike. However, steel wire also has applications beyond welding. You can use it as wiring in electronic circuits and power distribution systems and it works especially well in high temperature settings as armored cabling. Find the ideal steel wire rope price for every industrial use at Alibaba.com.

Steel wire rods also have applications in everyday life. For example, you can use coils of steel wire to construct fences and barriers both inside and outside homes. It"s a common material in agricultural businesses thanks to its toughness and resistance to oxidation. Use it to create reinforcement cages, enclosures for equipment, or add it to concrete to add extra strength where it really matters. From welding to concrete reinforcement, steel wire rope price will always find a use. And whether you need small batches or huge bulk orders, our metallic materials catalog is the ideal place to look.

Our stainless-steel aircraft cable consists of thin steel wires that are stranded together to give the cable a combination of flexibility and strength. Although the largest diameter of aircraft cable available at Tyler Madison maxes out at a ¼”, it is lightweight and strong enough to meet special airline safety standards.

Commercial quality "aircraft grade" cable is made from galvanized steel wire or stainless steel wire. Galvanized aircraft cable provides high tensile strength and adequate corrosion resistance for most commercial applications. Stainless steel cable provides slightly lower tensile strength, but greater resistance to corrosion. We also offer aircraft cable fitting services.

Cable or wire rope is fabricated from individual wires put together in a uniform helical arrangement to form what is called a strand. A strand typically contains 7 wires (1 x 7) or 19 wires (1 x 19), although others are available. Cable or wire rope contains a varying number of these strands such as 7 x 7 and 7 x 19 (number of strands x wire per strand). The more strands and more wires per strand, the more flexible the cable and the higher the cost. The greater the cable diameter, the greater the diameter of each wire and the greater the breaking strength.

Airplane cable is used for more than just aircraft applications. It’s strength and flexibility make aircraft braided steel cable perfect for numerous commercial and industrial uses. Stainless steel aircraft cable is typically used in areas where the components are exposed to oxidative chemicals such as salt, and the ability to resist corrosion is crucial. Galvanized aircraft cable is a more affordable solution, but it does not resist corrosion as well.

At Tyler Madison Inc., aircraft cable assemblies are just one of the many quality wire rope products that we manufacture for our industrial and commercial customers . We have the ability to create fully customized cable assemblies with standard or custom aircraft cable fittings. With skilled labor and precise advanced equipment, we are able to manufacture quality aircraft wire ropes and high-strength cables at an affordable price. Along the way, we can help you design and engineer aircraft cable fittings for your application. If you have an idea of what kind of aviation cable assembly or wire rope you need, but aren"t sure how to make it a reality, just contact Tyler Madison today and we will be ready to help!

No matter how customized the cable, wire rope or aircraft cable fittings for your application needs to be, we are more than capable of helping you get the job done!

For more information or inquiries about our wire rope or aircraft cable fittings, get in touch with us today. Our team of experts are here to answer any of your questions. We look forward to hearing from you!