steel wire rope for cranes for sale

Search from thousands of crane listings for new and used cranes updated daily from hundreds of dealers. Buy high quality used cranes from our network of worldwide locations for used cranes and quality lift equipment.

Crane wire ropes play an important role in ensuring a smooth conduct of work processes in harbors, off-shore platforms or various other applications where cranes are needed. Whether you need tower crane ropes or offshore crane ropes, galvanized or stainless steel ropes, you will find the optimal solution in our company.

When you are picking up crane wire ropes, make sure that the breaking strength of new wire ropes is five times the sizes of the largest load for lifting applications and three times for pulling applications.

Steel Wire rope is a very complex machinery element which primary function is the transmission of tensile forces. Its basic constructional design allows repeated changes in the direction of pull through reeving systems incorporating drums and sheaves. General purpose wire ropeshave been developed and standardized in national and international standards . However the increasing demand for higher breaking strength, greater flexibility, better rotation resistance , and extended rope life cannot be met by such general purpose steel wire ropeconstructions. Horizon Cable is a stocking distributor for Python Wire Rope, which through research, development and engineering over many years has developed rope constructions that have significantly improved operating life. There are vast array of applications that Python Wire Rope can be installed by Horizon Cable Service in Oklahoma, Texas, Wyoming, Kansas, North Dakota and New Mexico to improve service life. Below are a few of the proven applications for our high performance wire ropes:

One benefit to High Performance Wire Rope is the increased breaking strength over standard wire ropes. This is achieved in the manufacturing process by compaction processes. Standard ropes are drawn which create a round outer circumference, but compacted ropes have flat outer service. The two types of compaction are STRAND COMPACTION and SWAGE COMPACTION. Strand compaction is the most popular, in this process the compaction is applied to the individual wires, where the swage compaction is applied to the entire wire rope itself. Both have their advantages for particular applications.

Rotation resistant ropes can fall under three different classes Spin Resistant, Rotation Resistant, and Non Rotating. In all of these types of wire ropes the outer layer is twisted opposite for the inner layers. Rotation resistant and spin resistant ropes will have one inner layer, while non-rotating lines will have multiple inner strands rotating a different direction from the outers.

6 strand high strength swage compacted rope that is perfect for applications that require a crush resistant rope to be used in multi-layer winding systems; e.g. boom hoist on lattice boom mobile and tower cranes

Python Compac 18 is recommended for bot multipart load and single part applications where medium rotational stability is needed. Use as main and auxiliary hoist line on Grove, link belt, Manitowoc, Terex and other us made mobile and truck cranes. Also used very successfully as a pulling rope on underground cable pulling winches.

Main and auxiliary hoist line for European type mobile and for all types of construction tower cranes which require a high strength rotation resistant rope construction. Excellent rotation resistant properties make this rope the preferred choice for all single and multiple line reeving systems.

Stock up on every variety of steel wire rods at the Alibaba metalworking store. Our listings feature wholesale steel rods from a network of dependable Chinese manufacturing partners. If you need to source steel rods for construction projects, you"ll find products that are robust and durable. And if you need welding rods, they are easy to find via our search engine. Track down the steel wire rope for crane you need at affordable prices at Alibaba.com.

What can you do with the steel wire rods available from Alibaba"s wholesale store? One common use for steel rods is in the welding sector. Steel works well as a welding rod material thanks to its high ductility, meaning that welds are relatively strong and long-lasting. Choose a low carbon rod and you"ll be all set for successful welds in industrial settings and workshops alike. However, steel wire also has applications beyond welding. You can use it as wiring in electronic circuits and power distribution systems and it works especially well in high temperature settings as armored cabling. Find the ideal steel wire rope for crane for every industrial use at Alibaba.com.

Steel wire rods also have applications in everyday life. For example, you can use coils of steel wire to construct fences and barriers both inside and outside homes. It"s a common material in agricultural businesses thanks to its toughness and resistance to oxidation. Use it to create reinforcement cages, enclosures for equipment, or add it to concrete to add extra strength where it really matters. From welding to concrete reinforcement, steel wire rope for crane will always find a use. And whether you need small batches or huge bulk orders, our metallic materials catalog is the ideal place to look.

What are cranes wire used for? Crane wire is used in the cables of our customers, to manufacture cranes wire for gains. These types of crane wire are used to manufacture cranes wire for the cables of various types. The wire is usually galvanized or polypropylene crane wire which is used for 3 and 4 feet crane wire is needed for this galvanized wire. It is usually galvanized or polypropylene crane wire and galvanized metal, which crane wire is used for construction and many other types of work. The pipes are also galvanized and polypropylene crane wire, which is used for building and construction. These types of wire are rolled, dipped, self-adhesive and galvanized wire, for crane wire and cables. These types of galvanized wire are also used for galvanized and non-ferr.

Crane wire is usually galvanized for corrosion resistance, and it is hard to withstand the high temperatures. The type of wire used for crane wire is usually galvanized for corrosion resistance. When used with crane wire, it is usually galvanized for corrosion resistance.

Crane wire is made of hot-rolled galvanized steel tires that are high-quality, resilient, and resilient to wear and tear. Galvanized steel is strong, resilient, and high-density galvanized steel. Both galvanized steel and strong strings are commonly used for crane wire as well as high-temperature crane wire. Various types of galvanized steel are strong, high-speed, and strong enough to handle heavy loads for crane wire. Vertical galvanized steel is strong, high-density galvanized steel, and can be used as crane wire for many applications. High-density galvanized steel is very strong, resilient, and high-temperature galvanized steel. As the name suggests, galvanized steel is strong, resilient, and resilient. galvanized steel has strong str.

Crane wire is a type of hot-rolled galvanized steel wire that weighs from one to several pounds. Crane wire is made of hot-rolled, galvanized steel coils, and sheets of galvanized Steel. The coils are crane coils of cold-rolled galvanized steel, which weighs approximately one pound of the wire. Crane wire is coated with high-strength galvanized steel coils, etc. , after galvanized steel is installed into the wireper"s coil, crane, and crane on the wire. Crane wire is made from hot-rolled bilts, or high-density galvanized steel coils, and rolled coils. Crane wire is coated of high-strength, galvanized steel, and coils. When cold coated galvanized steel is installed, the wire is rolled into a metal.

Crane Wire is a wire of mesh used for fence cranes made of steel wire. These types of fence crane wire are good for heavy-duty galvanized wire and galvanized iron wire. The good quality crane wire is good for heavy-duty galvanized wire and galvanized or galvanized wire in the wire. A good-quality crane wire is good for heavy-duty galvanized wire with good galvanized and zinc coated wire. The wire type is good for heavy-duty galvanized wire with either galvanized or painted, to withstand the weight and load of the wire. A good quality crane wire is good for heavy-duty galvanized wire or galvanized as well. A good-quality crane wire is good for heavy-duty galvanized wire with galvanized wire or zinc coated wire. A good quality crane wire is used for p.

Years of continuously setting incredible standards in the manufacturing of rotation resistant and non-rotation crane ropes in various construction and engineering sectors has given SWR & Teufelberger a real cutting edge when providing customers with solutions to their steel wire rope requirements.

With over 130 years’ experience in the manufacturing of steel wire ropes Teufelberger strive to continuously maintain and improve quality by using only the highest quality of raw materials, professional quality inspections and modern state of the art manufacturing facilities when producing their SUPERFILL® and PLASTFILL® multi-strand steel wire ropes.

Each single strand of wire that is used in the manufacturing process of Teufelbergers ropes is used with purpose. From the core out to the exterior of all wire ropes they are designed with sophisticated engineering by professional bodies to provide innovative and tailor-made solutions.

Offering worldwide availability for both parts and wire rope along with the latest SUPERFILL® and PLASTFILL® rope technologies Teufelberger guarantee the highest of safety for your daily operations along with extremely high breaking forces and high resistance to challenging conditions.

All materials are fully certified and have full traceability in line with our ISO9001 procedures. All ropes are manufactured to the European standard EN 10204 3.1/LR

Years of continuously setting incredible standards in the manufacturing of rotation resistant and non-rotation crane ropes in various construction and engineering sectors has given SWR & Teufelberger a real cutting edge when providing customers with solutions to their steel wire rope requirements.

With over 130 years’ experience in the manufacturing of steel wire ropes Teufelberger strive to continuously maintain and improve quality by using only the highest quality of raw materials, professional quality inspections and modern state of the art manufacturing facilities when producing their SUPERFILL® and PLASTFILL® multi-strand steel wire ropes.

Each single strand of wire that is used in the manufacturing process of Teufelbergers ropes is used with purpose. From the core out to the exterior of all wire ropes they are designed with sophisticated engineering by professional bodies to provide innovative and tailor-made solutions.

Offering worldwide availability for both parts and wire rope along with the latest SUPERFILL® and PLASTFILL® rope technologies Teufelberger guarantee the highest of safety for your daily operations along with extremely high breaking forces and high resistance to challenging conditions.

All materials are fully certified and have full traceability in line with our ISO9001 procedures. All ropes are manufactured to the European standard EN 10204 3.1/LR

Where required crane ropes can be supplied with anti-spin / rotation proof properties as well as other key elements such as bend fatigue and abrasion resistance. For more information on the products and services we supply, email RSD today or call 01384 78004 to discuss your current requirements.

There are many types of cranes which require the use ropes and cables, there are also many types of rope constructions with varying properties, which means there are many things to consider when purchasing new crane ropes.

Overhead cranes, mobile cranes, all terrain cranes, crawler cranes, tower cranes, gantry cranes, off-shore pedestal cranes, dredger cranes, piling cranes, harbour cranes, and container cranes all use wire crane ropes, some cranes use more than one. You can find some helpful information on thesafe use of cranes here.

Crane ropes can be used for main hoist rope, boom rope, derrick rope & closing rope. Grab rope, hoist rope, tower erection rope, boom rope and trolley rope are other examples. Matching the ideal rope for your type of crane and application is not so easy. This is because no single rope will fit all requirements. For example no one rope is fatigue resistant, crush resistant, abrasion resistant and rotation resistant. Nor have the necessary breaking strength, rope diameter and/or rope structure stability. So choosing the right rope may require a little research.

Good examples are: boom hoists should be crush resistant. Clam shell closing lines must be resistant to bend fatigue, whilst overhead crane hoist rope requires strength and stability. For a container crane hoist rope or trolley rope the rope will need to be a combination of resistance to bending and abrasion as well as fatigue resistance. Tower erection rope should be rotation resistant. Trolley rope needs low elongation properties and boom hoist rope needs high flexibility and breaking load strength.

It is usually recommended to choose a crane wire rope that is an exact or close match to the original rope supplied with the crane by the manufacturer, or else choose more superior crane ropes.

A crane ropes strength is generally referred to as the minimum breaking load or force (MBL). It is possible to increase the MBL for most rope diameters in two ways:

By increasing the tensile strength of the actual wire used during the manufacturing process the MBL will increase. 1770N/mm², 1960N/mm² & 2160N/mm² are common wire tensile grades used in crane ropes. It is also feasible to raise the steel fill factor of the rope to increase its strength further. The fill factor measures cross sectional areas of the rope.

A more effective way of increasing the strength of a rope is to compact them. The individual strands may be compacted which reduces the number of voids throughout the rope. It also increases the surface contact area. This type of compacted wire rope has many other benefits which are discussed on our compacted wire rope page. Lower stress levels take place when conventional ropes are changed for compacted wire ropes. Frequently resulting in easier operation and longer working life. This is why the majority of our crane ropes are compacted.

The correct diameter is crucial to performance on a crane. A wire rope which is too big or too small for the drum and sheaves will increase wear and fatigue. This could cause premature rope failure. Additionally it is crucial that you make sure the diameter is consistent over the length of the rope. Inconsistency could cause wire breaks and shorten the ropes life. The use of compacted rope enables the same strength as a standard rope of the same construction but with a smaller diameter. It is always wise to select a rope with the same diameter as the original.

When choosing a crane rope, a wire core as opposed to a fibre core will improve its resistance to crushing. This is important when sheaves and drum winding is used.

This is the capability of the rope to tolerate repetitive bending under constant or variable loads. This is possibly one of the most important properties of a crane rope due to its use with sheaves. As loads increase when a reeving system is used the fatigue rate will also increase.

Non-rotating wire rope is an ordinary or reverse lay rope and possesses qualities so that each wire rope structure will possess natural torque properties. This is where both ends of the rope are secured and an applied force will create torque on the fixing points. The torque produced will depend on the scale of the force applied as well as on the construction of the crane ropes.

It is important to note that single layer Langs lay ropes possess dreadful rotational properties. And so should only be utilised where both ends are firmly fixed.

The primary reason for abrasive wear on crane ropes is brought on by other apparatus like winding drums and sheaves. This is because the rope wears between adjoining laps when wound on or off the drum. Selecting compacted rope may minimise this kind of wear and tear.

Whilst selecting crane wire rope, keep in mind that the bigger the outer wires the better resistance to wear and abrasion. Therefore ropes with the lower the number i.e. 6x19 will be better than a higher number i.e. 6x36 when utilised where wear and abrasion are the key reason for rope deterioration as opposed to bend fatigue.

Again a compacted rope with its smoother surface will offer a wider bearing surface to conventional rope, this leads to improved resistance to wear and abrasion.

If crane ropes are going to be utilised in a place where corrosive substances are used then it’s best to select a rope which has a galvanized finish. A ‘P.I.R.’ or plastic impregnated wire ropes are most suitable for severe craning operations, or plastic coated wire rope will also help to avoid corrosion.

When lubricating your rope with a high performance lubricant has a major effect regarding the life of the rope, especially in relation to bend resistance. Lubricating the wire rope additionally minimizes abrasive wear and extends fatigue life

Rope Services Direct can fit most fittings to your crane rope, having our own press facilities, we are are also able to supply a range of lifting gear and accessories to work well with cranes. From slings and shackles to chain blocks and trolleys.

Application: For general purpose overhead lifting, suspension, skidding, and drag lines - Used as boom hoist ropes for cranes. Ideal for rigging, mining, construction, logging, oilfield, machine moving, and aerospace

Description: Manufactured by Wire Rope Industries, these Surelift lines are tested and designed for superior quality and value. This well proven design provides the best performance and strength combination to ensure good wear resistance and fatigue life. The EIPS construction provides the necessary strength to meet increasing equipment demands. An Independent Wire Rope Core (IWRC) provides enhanced strand support, greater diameter consistency, and reduced stretch resulting in improved performance and security.

Wire Rope Material: Made from independent wire rope core (IWRC). Offering less stretch and resistance to crushing while maintaining rope flexibility. Fabricated from extra improved plow steel (EIPS).

Empire Crane Company was founded by Paul & Luke Lonergan in 2002. Empire Crane is an authorized dealer for Tadano ATF All Terrain Cranes, Tadano GR Rough Terrain Cranes, Demag Tadano Group, Tadano Mantis, Kobelco Crawler Cranes, Manitex Boom Trucks, Broderson, Magni Telehandlers, and Wolffkran Tower Cranes. Empire Crane offers sales, parts, service and rentals at their offices in Syracuse NY, Bridgewater NJ, and Boston MA. For more information, please visit: www.EmpireCrane.com

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Wire rope and strand is the core of the wire rope world. We carry standard stainless steel construction and specialty construction. We also carry specialty wire rope configurations like millimeter, from compacted wire rope to rotation resistant crane ropes and galvanized wire rope iwrc to fiber core wire rope. Import and USA-made available.

A: We are wire rope & steel cable factory and manufacturer.Our main products are galvanized steel wire rope,plastic coated steel cable and iron steel strand,etc.

A: We are factory,so sufficient stock,diversified and professional export package and content methods let our wire ropes have shorter delivery time,more excellent service for pre-sale & on-sale,and make “LKS” wire ropes more suitable for long time transportation.

Generally it is 1-3 days if our wire ropes are in stock. Or it is 15-20 days if wire ropes you want to purchase are not in stock.It is according to your order quantity.

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.But we will return this freight charge to you when next time your order quantity is up to our MOQ.

A: Yes. We are a professional manufacturer of steel cable & wire rope with 40+ years producing experience in China .We have always been cooperating with domestic and overseas customers and partners with the first- class quality and service to make great achievements. If this is your first time to contact us, please trust us, we’ll not let you down.

Wire rope has numerous applications for countless industries. Applications include the use of galvanized wire rope and wire rope accessories for latching, tie down, support as well as lifting. Wire rope is used in elevators, mining operations, oil and gas exploration, building construction tower cranes, bridge support, and in heavy-lift crane operations. Our wire rope products meet Federal spec. RR - W410D.

Steel wires for wire ropes are normally made of non - alloy carbon steel with a carbon content of 0.4 to 0.95%. The very high strength of the rope wires enables wire ropes to support large tensile forces. Some of Samco’s wire rope accessories include aluminum duplex sleeves, zinc plated cooper sleeves, stainless steel oval sleeves, cooper sleeves, button stops, ratchet load binder and cable cutters and hand swagers.

Bridon provides solutions to the most arduous and technically demanding challenges. Bridon products are used extensively in construction, mining, oil & gas extraction, telecommunications, and other specialized areas of engineering. For markets where there can be no compromise over product performance and integrity, choose Bridon.

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller"s listing for full details.See all condition definitionsopens in a new window or tab

Bridon-Bekaert steel wire rope specialists for many years have worked globally together with the major crane manufacturers (OEM) to develop a range of cost-effective ropes for the demanding environments in which today"s construction cranes operate. Our specialists are available to assist users in obtaining maximum performance and reliability from a wide range of globally available Bridon-Bekaert crane ropes.

Bayou City Wire Rope is an American owned and operated company based out of Humble, Texas. Bayou City Wire Rope is proud to distribute some of the industries most reliable specialty wire ropes for virtually every application. We distribute high-quality specialty wire ropes in the North American marketplace for construction, marine, oilfield and other diversified markets across the continent. Our high-performance steel wire ropes are used for Tower Cranes, Crawler Cranes, Truck Mounted Cranes, Foundation Cranes, Telescopic Mobile Cranes, Overhead Cranes, Still Mill Cranes, Gantry Cranes, as well as Ship Deck Cranes. With our location in Southeast Texas, we’re able to service the entire continent with the quickest delivery time possible. Bayou City Wire Rope is dedicated to delivering a quality product with efficient and effective service. “Quality Ropes Provided with Integrity”

Traditional steel ropes are extremely heavy in large quantities, which reduces the maximum lifting capacity for any crane. Ropes with Dyneema® are incredibly lightweight – 80% lighter than steel wire rope at the same strength – which give cranes the potential to handle higher payloads. Ropes with Dyneema® have a longer service life so fewer rope changes are needed. Furthermore ropes with Dyneema® show no stretch during lifting, are torque free, and require no lubrication or produce ‘fishhooks’ like steel wire rope.