steel wire rope grease supplier

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Manufacturer of chain, wire rope & cable grease. Available as coating grease. Features include soft, semifluid formulation & water-resistant. Coating grease contains a wear-reducing additive that protects against premature wear & shields metal against corrosive attack. Available in three NLGI grades in red/gold colors. Services include equipment reliability assessment, oil analysis, lubricant storage, handling & transfer, contamination exclusion, contamination removal, education & training & design, implementation & support.

Broadline distributor of electronic components, including heat sink products: aluminum heat sinks, cable & wire grease, wire rope & cable grease, fiber optics heat sinks, & printed circuit board heat sinks.

Manufacturer of biobased professional-grade greases and lubricants. Products reduce friction, heat and wear. Contain no VOCs and mix with petroleum-based greases. Non-flammable with high flash points. Non-toxic, biodegradable formulations recommended for environmentally sensitive areas near waterways. For use on chains, slides, rollers, hinges, pivot points, gears, cables, metal-to-metal contact areas, oil lubricated bearings. For industries including industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional-grade greases.

Manufacturer of wire rope and cable lubricants for marine industry. High-performance and biodegradable lubricants and water resistant and extreme-pressure greases are available. Offered in different specifications.

Manufacturer of wire rope and cable grease. Nuclear grade bearing, silicone brake and silicone dielectric greases are available. Used in cable connections, battery and parking break cables applications. Available in tubes, cartridges, pails, cans and drums. RoHS and REACH compliant. NSF, USDA, and FDA certified.

Manufacturer of wire rope and cable grease. Types include biodegradable and marine and automotive grease. Resistant to fresh and salt water. Services include designing, product development, plant surveys and lubricant inventory consolidation, lubrication maintenance, oil or fluid and grease analysis and training. Markets served include food, beverage and pharmaceutical. NSF/H-1 registered.

ISO 9001:2000, ISO 14001 & ISO/TS 16949:2002 certified custom manufacturer of a wide variety of greases. Greases are available for wide variety of mechanical & electromechanical components including ball & lead screws, rolling element bearings, powdered metal bearings, contacts in electric switches, connectors, control cables, gearing, potentiometers, sensors, optical devices, slides, cams, detents & actuators. Special greases include synthetic greases for the corrugating industry, damping greases & electrically conductive greases.

Manufacturer of synthetic multi-purpose PTFE ( lubricants & grease, low temperature torque, high temperature performance. Magnalube-G protective & lubricating film on metal parts, water resistant specialty lubricant for industrial engineers. Magnalube GX with molybdenum disulfide for extreme pressure environments. All product applications include machining, construction, gears, bearings, hydraulics & pneumatic mechanical functions.

Distributor of cable & wire rope grease. Product range includes telecom tools, batteries, digging/trenching tools, drill bits, electrical connectors, cord & terminals, fasteners/anchors, powertools, screwdrivers/nutdrivers & tool kits for telecom & cable companies.

Distributor of O-ring greases for cable, wire, chain and rope applications. Features friction, wear and corrosion-resistant properties with a variety of operating temperature ranges. Available in tubes, pails and aerosols. Also offers oil and gel lubricants. Materials worked with include PTFE and silicone.

Manufacturer and distributor of grease for chain, cable and wire rope applications. Products include conventional grease, aerosol grease, food grade aerosol grease, liquid aerosol grease, food grade white grease, biodegradable grease, bearing grease, heavy duty multipurpose grease and heavy duty aluminum complex multipurpose grease. Grease for use in asphalt plant, bottling/canning, construction, fleet maintenance, marine transport, paper/lumber mill, plastics manufacturing, power generation and printing applications are available. JIT delivery available.

Manufacturer of braided products & accessories, using synthetic yarns & wires. Products include ropes for commercial fishing, utilities, sailing & proprietary applications. Weighted, dynamic, static & float lines, shock cords, specialty & rescue lines & custom products using high-tech materials such as Kevlar®, spectra & Dyneema®.

Design & manufacture of a high efficiency grease that outperforms the others. Each Accrolube® specialty lubricant is designed for specific applications. Can also custom formulate a lubricant to fit particular need.

Manufacturer of calcium sulfonate and lithium grease for wire ropes, trolley wires, and cables. Specifications include 94 and 96 viscosity index and 9.25 and 8.29 lbs. per gal. density. Available with various features such as smooth and semi-fluid textures, oxidation and water resistance, thermal stability, and rust and corrosion protection. Also offers trailer axle, machinery, and coupling grease.

Manufacturer of cable and wire rope grease. Suitable for lubricating wire ropes, cables, flexible couplings, chains, open gears, and partly open gears. Blending, product development, packaging, transloading, warehousing, and distribution services are also available.

Manufacturer of wire rope & cable lubricants including grease. Specifications of wire rope & cable grease include pour point of minus 25 degrees F, flash point of 120 degrees F, viscosity of 3.28 at 100 degrees F & 12.8 at 40 degrees F, & specific gravity of 0.89. Wire rope & cable grease capacities include ability to penetrate wire rope, evaporate & leave a film of molybdenum disulphide in the core to lubricate each wire strand. Wire rope & cable grease can be applied by spraying, brushing or dipping in a in-line tank with no heating requirements. Grease is available in 25 lb. pail or 55 gal. drums. Compliant with ASTM standards.

Distributor of gear, wire rope and cable greases for marine industry. Other products include oils, lubricants, fluids, inhibitors, and coolants. Also offers turnkey lubricant services.

Distributor of rope grease including rust preventive products. Contains three performance rust preventives covering a range of applications including storage and inter-operational activities. Intended for protection cold-rolled sheet and coiled steel in the metal industry. Available in weight of 40.00 lbs., rope grease can be used as protective coatings for cold-rolled sheet and coiled steel, coatings for precision machined parts and instruments for storage and die lubricant in light duty pressing operations.

Manufacturer of standard and custom wire rope and cable lubricants, specifically greases. Available in silicone and non-silicone dielectric grease types with temperature ranges of -40 degrees C to 200 degrees C. Synthetic and damping greases are also offered. Other products available are silicone fluids, compounds, and grease removers. Contract packaging and filling services are also offered. Serves the automotive, electrical, medical, oil and gas, marine, and food processing industries. ISO/TS 16949:2009 certified.

Manufacturer of biodegradable and non-biodegradable corrosion resistant grease for sealing wireline, wire rope and cables. Biodegradable sealing grease is available in 235 to 314 cSt viscosity. Automotive, heavy duty fleet, off-road, aviation, environmental, extreme pressure, water resistant, high temperature and synthetic grease also available. Reduces friction and protects against corrosion from hydrogen sulfide (H2S), brine water, carbon dioxide (CO2), acids, caustics, chemicals, saltwater, drips and splatters. Suitable for food-grade, aircraft, sports, engine and drive train applications. Private labeling services and customized chemical solutions are also offered.

Distributor of abrasives & lubricants including cable, wire, rope & wire rope grease. Services include vendor managed inventory & process improvement. Markets served include electronic, foundries, aerospace, automotive, woodworking, metal working & ship repair industries.

Distributor of abrasives & lubricants including cable, wire, rope & wire rope grease. Services include vendor managed inventory & process improvement. Markets served include electronic, foundries, aerospace, automotive, woodworking, metal working & ship repair industries.

Distributor of wire rope and cable lubricants. Lubricants come in multiple forms and are frequently used to reduce friction, prevent thread locking and provide chemical resistance.

Manufacturer of heavy duty lubricants for chain, wire rope and cable applications. Available in 16 oz. capacity and 900 degrees F operating temperature. Protects from corrosion and rust. Provides non-gumming protective film. Serves the marine, heavy equipment repair, mining, power generation, wastewater treatment and chemical industries.

Distributor of wire and cable drawing and pulling lubricants. Value added services include assembly, barcoding, bin stocking, bonded inventory, consignment inventor, consolidated billing, dock-to-stock, drop ship, EDI, electronic funds, JIT, Kanban, kitting, long term pricing, one-stop, quality control, rebates, schedule sharing, vendor inventory, and more.

Manufacturer of wire rope & cable lubricants. Products include coating grease, penetrating lubricants, coating lubricants & synthetic coating lubricants. Services include equipment reliability assessment, oil analysis, lubricant storage, handling & transfer, contamination exclusion, contamination removal, education & training & design, implementation & support.

Manufacturer of non-staining and slow-drying foam and synthetic wax wire/cable pulling lubricants. Available in aerosol cans, squeeze bottles and buckets. Working temperature ranges from 20 to 122 degrees F. Suitable for electrical and utility applications. Meets ANSI, ASTM and OSHA standards. CSA approved. cUL listed. Made in the USA.

Manufacturer and distributor of multi-purpose and heavy duty aerosol grease chain/cable lubricants. Available in 16 oz. capacity. Contains molybdenum disulfide. Suitable for chain saw, hinge, hoist, conveyor, wire rope and cable, roller chain and sprocket applications. Meets NFPA standards.

Manufacturer of lubricants including oils and grease for oven, conveyor chains, wire ropes and cables applications. Features include biodegradability, temperature and mechanical stability, non-toxic, resistance to rust or corrosion. Extremely high temperature working grease is also offered. Packaged in pails, drums, cans and tote. Serves the construction, agriculture, energy, government, rail, mining, oil and gas industries. NSF H1 Certified. USDA, FM and FDA approved.

Manufacturer and distributor of wire pulling cable lubricants for industrial applications. Available in pails, bottles and drums with an operating temperature from 30 degrees F to 120 degrees F and 6 pH to 8 pH solution. Various features include cling characteristics, translucent, non-staining, non-toxic and non-corrosive. Lubricant gels are suitable for reducing friction. Meets ASTM-D1693 and IEEE-1210-1996 standards. UL listed. On-time delivery.

ISO 9001:2000 certified woman-owned manufacturer of standard & custom wire drawing, wire pulling, wire rope, cable & chain lubricants including molybdenum disulfide aerosol lubricants. Features include anti-friction & anti-wear properties. Aerosol lubricants range in operating temperatures from -300 degrees F to plus 750 degrees F with molybdenum disulfide concentration of 5 percent . Made in the USA.

Distributor of cable and wire rope lubricants. Features include semi-synthetic and polymer base formulations and high temperature stabilities. Suitable for use with wire or cable insulated with rubber, neoprene, nylon and PVC plastics , hypalon, high density polyethylene and cross linked polyethylene (XLP). Serves the chemical, civil, food, mining, oil, gas, power generation, paper, OEM and wastewater industries.

Manufacturer of wire rope and cable lubricants. Contains organic molybdenum and anti-wear additives. Resistant to corrosion, water wash-off, high-temperature sling off and friction. Used in meat and poultry plants. Can withstand temperatures up to 350 degrees F. Offered in 16 oz. aerosol containers and 5 gal. and 55 gal. drums. Markets served include food and beverage, marine, oil and gas, automotive, utility, commercial and institutional. On-time delivery available.

Distributor of lubricants for industrial and commercial applications. Products include greases, engine and compressor oils, transmission fluids, fuels, oil additives, hand and industrial cleaners. Types of lubricants include wire rope/chain, cable, gear, food-grade and industrial spray. Other services such as diagnostic, preventive maintenance, monitoring, testing and evaluation. Serves the heavy construction, mining, manufacturing, marine, transportation, agri-business, concrete, sand and gravel industries.

ISO 9001:2000 certified manufacturer & distributor of lubricant products including chain, wire rope & cable lubricants. Services include analysis & consultation, operation & plant surveys & fuel & oil analysis.

Manufacturer of a complete line of specialty lubricants, anti-seize, and dry film lubricants available in aerosol & bulk. Lubricant applications used for cable, chain, extreme pressure, friction & wear, high pressure, high temperature, industrial process, low temperature, rope, water repellent, and belting. Contract packaging & custom formulations.

Manufacturer of lubricants for the industrial manufacturing and plastics industries. Available lubricant types include oils, greases, and fluids. Other products include wax, fuels, chemicals, and motor oils. Serves industries such as aviation, commercial vehicle, marine, and automotive.

Cibus, Exxon, ExxonMobil, Flexon, Gargoyle, Mobil, Mobil 1, Mobil Almo, Mobil DTE, Mobil Delvac, Mobil EAL, Mobil Pegasus, Mobil Polyrex, Mobil Rarus, Mobil SHC, Mobil Super, Mobil Vactra, Mobil Vacuoline, Mobil Velocite, Mobilarma, Mobilfluid, Mobilgard, Mobilgear, Mobilgrease, Mobilith, Mobilmet,...

Private-label & contract packaging manufacturer of custom wire, wire rope & cable pulling lubricants. Types of lubricants include vegetable based lubricants, metal drawing lubricants, stamping lubricants, extrusion lubricants, mold release lubricants & conveyor lubricants. Other products such as degreasers, hand soaps, cleaners, coatings, detergents, automotive cleaning products, food service cleaning products & commercial laundry products are also available. Services include contract packaging & private labeling.

Molybdenum disulfide (moly) & graphite dry lubricants with rust & corrosion inhibitors for outdoor applications & as protective coating for wire rope & cable, crane booms & mine shaft cables.

Distributor of industrial lubricants for wire ropes, gears, and bearings. Available in 20 L pails and 205 L drums with aluminum, lithium, and PTFE thickener, non-melting, and rust and wear protection features. Suitable for high and low temperature and wet applications. Serves the power generation market.

Distributor of lubricants & cleaners for chains, wire ropes & cables. Specifications of lubricants include flash point of more than -17 degrees C temperature, 360 degrees C auto ignition temperature, 60.5 degrees C boiling point, 3.0 vapor density, 47 kPa vapor pressure, 0.74 & 0.76 specific gravity, viscosity more than 14 sq. mm/second & 45 percent VOC content.

Manufacturer of petroleum based lubricants including wire rope & cable lubricants in black color. Lubricants are available with flash point greater than 400 degrees F and 0.91 specific gravity. Custom formulations available.

With Alibaba.com, you can rest easy that you will be able to find the exact wholesale wire rope grease for the applications you have in mind. As one of the largest marketplaces for B2B shopping in the world, we have a huge network of wholesalers that have listed all sorts of lubricating jelly products and more.

For personal lube listings, we have a range of safe-to-use wire rope grease products. This includes pre seed lubricant options that are great for couples trying to conceive and mimics the body’s natural lubricants. For older women, we have options for menopause dryness. These vaginal moisturizers are designed specifically to prevent discomfort and add pleasure. For those with sensitive skin, we have specialist lube for sensitive skin products.

wire rope grease are also needed for home appliances and industrial lubricants. For home use, we have products for gun lubrication, sewing machine lubricants and more. These petroleum based lubricants can be used anywhere in the home where moving parts rub together. Squeaky door hinges will be a thing of the past with the options available here.

Wire Rope Lubricant quickly penetrates to the core. This ensures that the rope is lubricated throughout while providing a nondrying, nontacky film on the outside of the rope which protects outer strands from corrosion as well as lubricating the wire rope drums and sheaves.

A specially formulated penetrating lubricant for wire ropes. Can be applied directly onto wet ropes while providing excellent adhesive properties, reducing consumption. Prevents inner strand corrosion and rubbing wear. It is an all-season product that does not require change of grades as temperatures fluctuate. Applicable manually or through most automatic lube systems. Useful temperature range -46°C to 60°C (-50°F to 140°F).

High performance semi-fluid wire rope dressing grease providing excellent corrosion protection in multiple environments including saltwater and under water.

The Kirkpatrick Group, Inc. has been the Original Equipment Manufacturer of Dynagard™ Environmental Lubricants and Wire Rope Lubrication equipment for over 30 years. We developed the first successful Wire Rope Lubrication System

Specialises in:Air Lubrication Systems, Environmentally Acceptable Lubricants (EAL), Environmentally Safe Lubricants, Lubrication Equipment and Wire Rope Maintenance Equipment

Wire ropes are integral components for many buildings, machines, and structures. This material is comprised of contiguous wire strands that are wrapped around a centralized core. It is important to lubricate wire ropes in order to limit friction and prevent corrosion.

There are two main types of wire rope lubricants: penetrating and coating. A penetrating lubricant contains a solvent that transports the lubricant into the core of the wire. Once on the core, it evaporates and leaves behind a heavy, lubricating film that is capable of protecting each strand. A coating lubricant penetrates the wire slightly, and protects the outside of the cable from moisture, wear, fretting and corrosion.

Both of these lubrications are used on wire ropes, but since most failures come from the inside of the wire rope, it is most important to thoroughly saturate the core with lubrication.

Most lubricators are a made up of a mixture between petroleum and other compounds. The petroleum provides excellent corrosion and water resistance, which helps to extend the life of the wire. In addition to petroleum lubricants, grease and vegetable oils are also uses to coat the wires. These mixtures penetrate the core and are easily applied. Most cables are lubricated before they are used, but it is important to re-lubricated wires habitually.

Developed as a service tool, the Lincoln Wire Rope Lubricator is attached periodically to equipment on a monthly, quarterly or other cycle to lubricate wire ropes. Lubrication intervals should be determined according to rope manufacturer specifications. The life cycle of a steel wire rope that has been periodically lubricated is approximately six to eight times longer than a wire rope that has not been lubricated. Specifically for Wire Rope Lubricator applications a biodegradable grease LGTE 2 is available. The grease is environmentally acceptable and certified with Ecolabel.

Also, lubricating a wire rope while in service helps to prevent corrosion of the wires. Corrosion can be internal and external, and it often is caused by acids, alkaline waters, salt air, humidity, fumes, and abrasive and industrial environments in general.

Wire rope forms an important part of many machines and structures. There are many kinds of wire rope designed for different applications. The wire rope’s performance is influenced by several factors, including type of operation and environment which can accelerate corrosion, oxidation, and wear. Hence, proper, and adequate lubricant application in the field is paramount. Essentially, wire rope lubricants have three principal functions, and it is to reduce friction, provide wear protection and corrosion protection.

We offer both standard and customized solutions for Wire Rope Lubricant to Cranes, Offshore, Onshore, Oil & Gas, Marine, Port, Ship Management, Construction, Transportation, Steel, Industrial and EPC Contractors. We are serving Worldwide Clients based in Dubai, United Arab Emirates UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Iraq, Kurdistan, Yemen, Lebanon, Jordan, Sudan, Egypt, Nigeria, Algeria, Angola, Kenya, Tanzania, South Africa, Morocco, Libya, Kazakhstan, Armenia, Azerbaijan, Turkmenistan, Tunisia, Ghana, Tanzania, Uzbekistan. We are Looking forward to fulfilling your expectations with the best of our product range. Our Excellent Logistics setup supports shipping of goods to major Cities Such As Dubai, Abu Dhabi, Al Ain, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Doha, Muscat, Kuwait, Riyadh, Jeddah, Dhahran, Jubail And Yanbu, Baghdad, Basra, Mosul, Erbil, Sulaymaniyah, Manama, Beirut, Amman, Sanaa, Aden, Mukalla, Khartoum, Abuja, Algiers, Luanda, Nairobi, Dar es salaam, cape town, Durban, Johannesburg, Rabat, Tripoli, Benghazi, Misrata, Ashgabat, Almaty, Aktau, Yerevan, Baku, Accra, Lagos, Port Harcourt, Port Sudan, Tunis, Port of Mombasa, Dodoma, Dar Es Salaam, Aktobe, Tashkent, Balkanabat, Turkmenbashi, Kirkuk. We will be pleased to serve your requirements with the best of our products.

A major manufacturer of steel and wire rope creates products designed for some of the world’s most demanding applications across various industries, includingonshore and offshore oil & gas, underground and surface mining, cranes and industrial, structures, fishing and marine, cableways and forestry. They needed a powerful, durable, heavy-duty lubricant for their manufacturing facilities to ensure that their production was able to continue making the powerful products that they are known for best. This wire rope manufacturer turned to Super Lube® for our renowned lubricant known to work harder and last longer for meeting today"s most demanding requirements.

Multi-Purpose Synthetic Grease with Syncolon® (PTFE) is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased. This company relies on these powerful qualities to ensure that their products and reputation is maintained.

ASV RL1 is a highly adhesive,semi fluid extreme pressure grease for lubrication and corrosion protection of wire ropes and steel cables operating under adverse conditions of load,temperatures or environment.It penetrates rapidly through wire rope strands to leave a completely water resistant heavy duty lubricating film which provides both internal as well as external lubrication & corrosion protection.The solid lubricants prevent wearing and premature damage of internal strands and increase the life of the wire ropes.ASV RL 1 forms a protective and lubricating water proof film over the surface which does not emulsify even if submerged in water.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.