steel wire rope lubricant supplier

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Wire Rope Lubricant quickly penetrates to the core. This ensures that the rope is lubricated throughout while providing a nondrying, nontacky film on the outside of the rope which protects outer strands from corrosion as well as lubricating the wire rope drums and sheaves.

Distributor of wire rope and cable lubricants. Lubricants come in multiple forms and are frequently used to reduce friction, prevent thread locking and provide chemical resistance.

Manufacturer of heavy duty lubricants for chain, wire rope and cable applications. Available in 16 oz. capacity and 900 degrees F operating temperature. Protects from corrosion and rust. Provides non-gumming protective film. Serves the marine, heavy equipment repair, mining, power generation, wastewater treatment and chemical industries.

Distributor of wire and cable drawing and pulling lubricants. Value added services include assembly, barcoding, bin stocking, bonded inventory, consignment inventor, consolidated billing, dock-to-stock, drop ship, EDI, electronic funds, JIT, Kanban, kitting, long term pricing, one-stop, quality control, rebates, schedule sharing, vendor inventory, and more.

Manufacturer of wire rope & cable lubricants. Products include coating grease, penetrating lubricants, coating lubricants & synthetic coating lubricants. Services include equipment reliability assessment, oil analysis, lubricant storage, handling & transfer, contamination exclusion, contamination removal, education & training & design, implementation & support.

Manufacturer of non-staining and slow-drying foam and synthetic wax wire/cable pulling lubricants. Available in aerosol cans, squeeze bottles and buckets. Working temperature ranges from 20 to 122 degrees F. Suitable for electrical and utility applications. Meets ANSI, ASTM and OSHA standards. CSA approved. cUL listed. Made in the USA.

Manufacturer and distributor of multi-purpose and heavy duty aerosol grease chain/cable lubricants. Available in 16 oz. capacity. Contains molybdenum disulfide. Suitable for chain saw, hinge, hoist, conveyor, wire rope and cable, roller chain and sprocket applications. Meets NFPA standards.

Manufacturer of lubricants including oils and grease for oven, conveyor chains, wire ropes and cables applications. Features include biodegradability, temperature and mechanical stability, non-toxic, resistance to rust or corrosion. Extremely high temperature working grease is also offered. Packaged in pails, drums, cans and tote. Serves the construction, agriculture, energy, government, rail, mining, oil and gas industries. NSF H1 Certified. USDA, FM and FDA approved.

Manufacturer and distributor of wire pulling cable lubricants for industrial applications. Available in pails, bottles and drums with an operating temperature from 30 degrees F to 120 degrees F and 6 pH to 8 pH solution. Various features include cling characteristics, translucent, non-staining, non-toxic and non-corrosive. Lubricant gels are suitable for reducing friction. Meets ASTM-D1693 and IEEE-1210-1996 standards. UL listed. On-time delivery.

ISO 9001:2000 certified woman-owned manufacturer of standard & custom wire drawing, wire pulling, wire rope, cable & chain lubricants including molybdenum disulfide aerosol lubricants. Features include anti-friction & anti-wear properties. Aerosol lubricants range in operating temperatures from -300 degrees F to plus 750 degrees F with molybdenum disulfide concentration of 5 percent . Made in the USA.

Distributor of cable and wire rope lubricants. Features include semi-synthetic and polymer base formulations and high temperature stabilities. Suitable for use with wire or cable insulated with rubber, neoprene, nylon and PVC plastics , hypalon, high density polyethylene and cross linked polyethylene (XLP). Serves the chemical, civil, food, mining, oil, gas, power generation, paper, OEM and wastewater industries.

Manufacturer of wire rope and cable lubricants. Contains organic molybdenum and anti-wear additives. Resistant to corrosion, water wash-off, high-temperature sling off and friction. Used in meat and poultry plants. Can withstand temperatures up to 350 degrees F. Offered in 16 oz. aerosol containers and 5 gal. and 55 gal. drums. Markets served include food and beverage, marine, oil and gas, automotive, utility, commercial and institutional. On-time delivery available.

Distributor of lubricants for industrial and commercial applications. Products include greases, engine and compressor oils, transmission fluids, fuels, oil additives, hand and industrial cleaners. Types of lubricants include wire rope/chain, cable, gear, food-grade and industrial spray. Other services such as diagnostic, preventive maintenance, monitoring, testing and evaluation. Serves the heavy construction, mining, manufacturing, marine, transportation, agri-business, concrete, sand and gravel industries.

ISO 9001:2000 certified manufacturer & distributor of lubricant products including chain, wire rope & cable lubricants. Services include analysis & consultation, operation & plant surveys & fuel & oil analysis.

Manufacturer of a complete line of specialty lubricants, anti-seize, and dry film lubricants available in aerosol & bulk. Lubricant applications used for cable, chain, extreme pressure, friction & wear, high pressure, high temperature, industrial process, low temperature, rope, water repellent, and belting. Contract packaging & custom formulations.

Manufacturer of lubricants for the industrial manufacturing and plastics industries. Available lubricant types include oils, greases, and fluids. Other products include wax, fuels, chemicals, and motor oils. Serves industries such as aviation, commercial vehicle, marine, and automotive.

Private-label & contract packaging manufacturer of custom wire, wire rope & cable pulling lubricants. Types of lubricants include vegetable based lubricants, metal drawing lubricants, stamping lubricants, extrusion lubricants, mold release lubricants & conveyor lubricants. Other products such as degreasers, hand soaps, cleaners, coatings, detergents, automotive cleaning products, food service cleaning products & commercial laundry products are also available. Services include contract packaging & private labeling.

Molybdenum disulfide (moly) & graphite dry lubricants with rust & corrosion inhibitors for outdoor applications & as protective coating for wire rope & cable, crane booms & mine shaft cables.

Distributor of industrial lubricants for wire ropes, gears, and bearings. Available in 20 L pails and 205 L drums with aluminum, lithium, and PTFE thickener, non-melting, and rust and wear protection features. Suitable for high and low temperature and wet applications. Serves the power generation market.

Distributor of lubricants & cleaners for chains, wire ropes & cables. Specifications of lubricants include flash point of more than -17 degrees C temperature, 360 degrees C auto ignition temperature, 60.5 degrees C boiling point, 3.0 vapor density, 47 kPa vapor pressure, 0.74 & 0.76 specific gravity, viscosity more than 14 sq. mm/second & 45 percent VOC content.

Manufacturer of petroleum based lubricants including wire rope & cable lubricants in black color. Lubricants are available with flash point greater than 400 degrees F and 0.91 specific gravity. Custom formulations available.

Phillips 66® Cable Lube is a heavy-duty lubricant developed for the lubrication and preservation of wire ropes and cables. It is formulated with a heavy residual base oil along with special rust and corrosion inhibitors and is cut back with a volatile, non-chlorinated solvent for ease of application without heating. Its low viscosity and special wetting properties permit penetration to the core of the wire rope or cable. The solvent then evaporates, leaving a tough, semi-fluid lubricant in the core and on each wire strand.

A specially formulated penetrating lubricant for wire ropes. Can be applied directly onto wet ropes while providing excellent adhesive properties, reducing consumption. Prevents inner strand corrosion and rubbing wear. It is an all-season product that does not require change of grades as temperatures fluctuate. Applicable manually or through most automatic lube systems. Useful temperature range -46°C to 60°C (-50°F to 140°F).

The Kirkpatrick Group, Inc. has been the Original Equipment Manufacturer of Dynagard™ Environmental Lubricants and Wire Rope Lubrication equipment for over 30 years. We developed the first successful Wire Rope Lubrication System

Specialises in:Air Lubrication Systems, Environmentally Acceptable Lubricants (EAL), Environmentally Safe Lubricants, Lubrication Equipment and Wire Rope Maintenance Equipment

Developed as a service tool, the Lincoln Wire Rope Lubricator is attached periodically to equipment on a monthly, quarterly or other cycle to lubricate wire ropes. Lubrication intervals should be determined according to rope manufacturer specifications. The life cycle of a steel wire rope that has been periodically lubricated is approximately six to eight times longer than a wire rope that has not been lubricated. Specifically for Wire Rope Lubricator applications a biodegradable grease LGTE 2 is available. The grease is environmentally acceptable and certified with Ecolabel.

Also, lubricating a wire rope while in service helps to prevent corrosion of the wires. Corrosion can be internal and external, and it often is caused by acids, alkaline waters, salt air, humidity, fumes, and abrasive and industrial environments in general.

Wire rope forms an important part of many machines and structures. There are many kinds of wire rope designed for different applications. The wire rope’s performance is influenced by several factors, including type of operation and environment which can accelerate corrosion, oxidation, and wear. Hence, proper, and adequate lubricant application in the field is paramount. Essentially, wire rope lubricants have three principal functions, and it is to reduce friction, provide wear protection and corrosion protection.

We offer both standard and customized solutions for Wire Rope Lubricant to Cranes, Offshore, Onshore, Oil & Gas, Marine, Port, Ship Management, Construction, Transportation, Steel, Industrial and EPC Contractors. We are serving Worldwide Clients based in Dubai, United Arab Emirates UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Iraq, Kurdistan, Yemen, Lebanon, Jordan, Sudan, Egypt, Nigeria, Algeria, Angola, Kenya, Tanzania, South Africa, Morocco, Libya, Kazakhstan, Armenia, Azerbaijan, Turkmenistan, Tunisia, Ghana, Tanzania, Uzbekistan. We are Looking forward to fulfilling your expectations with the best of our product range. Our Excellent Logistics setup supports shipping of goods to major Cities Such As Dubai, Abu Dhabi, Al Ain, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Doha, Muscat, Kuwait, Riyadh, Jeddah, Dhahran, Jubail And Yanbu, Baghdad, Basra, Mosul, Erbil, Sulaymaniyah, Manama, Beirut, Amman, Sanaa, Aden, Mukalla, Khartoum, Abuja, Algiers, Luanda, Nairobi, Dar es salaam, cape town, Durban, Johannesburg, Rabat, Tripoli, Benghazi, Misrata, Ashgabat, Almaty, Aktau, Yerevan, Baku, Accra, Lagos, Port Harcourt, Port Sudan, Tunis, Port of Mombasa, Dodoma, Dar Es Salaam, Aktobe, Tashkent, Balkanabat, Turkmenbashi, Kirkuk. We will be pleased to serve your requirements with the best of our products.

Wire rope forms an important part of many machines and structures. It is comprised of continuous wire strands wound around a central core. There are many kinds of wire rope designed for different applications. Most of them are steel wires made into strands wound with each other. The core can be made of steel, rope or even plastics.

Wire ropes (cables) are identified by several parameters including size, grade of steel used, whether or not it is preformed, by its lay, the number of strands and the number of wires in each strand.

A typical strand and wire designation is 6x19. This denotes a rope made up of six strands with 19 wires in each strand. Different strand sizes and arrangements allow for varying degrees of rope flexibility and resistance to crushing and abrasion. Small wires are better suited to being bent sharply over small sheaves (pulleys). Large outer wires are preferred when the cable will be rubbed or dragged through abrasives.

There are three types of cores. An independent wire rope core (IWRC) is normally a 6x7 wire rope with a 1x7 wire strand core resulting in a 7x7 wire rope. IWRCs have a higher tensile and bending breaking strength than a fiber core rope and a high resistance to crushing and deformation.

A wire strand core (WSC) rope has a single wire strand as its core instead of a multistrand wire rope core. WSC ropes are high strength and are mostly used as static or standing ropes.

Wire ropes also have fiber cores. Fiber core ropes were traditionally made with sisal rope, but may also use plastic materials. The fiber core ropes have less strength than steel core ropes. Fiber core ropes are quite flexible and are used in many overhead crane applications.

The lay of a wire rope is the direction that the wire strands and the strands in the cable twist. There are four common lays: right lay, left lay, regular lay and lang lay. In a right lay rope the strands twist to the right as it winds away from the observer. A left lay twists to the left. A regular lay rope has the wires in the strands twisted in the opposite direction from the strands of the cable. In a lang lay rope, the twist of the strands and the wires in the strands are both twisted the same way. Lang lay ropes are said to have better fatigue resistance due to the flatter exposure of the wires.

Wire ropes are made mostly from high carbon steel for strength, versatility, resilience and availability and for cost consideration. Wire ropes can be uncoated or galvanized. Several grades of steel are used and are described in Table 1.

Steel cable wire is stiff and springy. In nonpreformed rope construction, broken or cut wires will straighten and stick out of the rope as a burr, posing a safety hazard. A preformed cable is made of wires that are shaped so that they lie naturally in their position in the strand, preventing the wires from protruding and potentially causing injury. Preformed wire ropes also have better fatigue resistance than nonpreformed ropes and are ideal for working over small sheaves and around sharp angles.

Lubricating wire ropes is a difficult proposition, regardless of the construction and composition. Ropes with fiber cores are somewhat easier to lubricate than those made exclusively from steel materials. For this reason, it is important to carefully consider the issue of field relubrication when selecting rope for an application.

There are two types of wire rope lubricants, penetrating and coating. Penetrating lubricants contain a petroleum solvent that carries the lubricant into the core of the wire rope then evaporates, leaving behind a heavy lubricating film to protect and lubricate each strand (Figure 2). Coating lubricants penetrate slightly, sealing the outside of the cable from moisture and reducing wear and fretting corrosion from contact with external bodies.

Both types of wire rope lubricants are used. But because most wire ropes fail from the inside, it is important to make sure that the center core receives sufficient lubricant. A combination approach in which a penetrating lubricant is used to saturate the core, followed with a coating to seal and protect the outer surface, is recommended. Wire rope lubricants can be petrolatum, asphaltic, grease, petroleum oils or vegetable oil-based (Figure 3).

Petrolatum compounds, with the proper additives, provide excellent corrosion and water resistance. In addition, petrolatum compounds are translucent, allowing the technician to perform visible inspection. Petrolatum lubricants can drip off at higher temperatures but maintain their consistency well under cold temperature conditions.

Various types of greases are used for wire rope lubrication. These are the coating types that penetrate partially but usually do not saturate the rope core. Common grease thickeners include sodium, lithium, lithium complex and aluminum complex soaps. Greases used for this application generally have a soft semifluid consistency. They coat and achieve partial penetration if applied with pressure lubricators.

Petroleum and vegetable oils penetrate best and are the easiest to apply because proper additive design of these penetrating types gives them excellent wear and corrosion resistance. The fluid property of oil type lubricants helps to wash the rope to remove abrasive external contaminants.

Wire ropes are lubricated during the manufacturing process. If the rope has a fiber core center, the fiber will be lubricated with a mineral oil or petrolatum type lubricant. The core will absorb the lubricant and function as a reservoir for prolonged lubrication while in service.

If the rope has a steel core, the lubricant (both oil and grease type) is pumped in a stream just ahead of the die that twists the wires into a strand. This allows complete coverage of all wires.

After the cable is put into service, relubrication is required due to loss of the original lubricant from loading, bending and stretching of the cable. The fiber core cables dry out over time due to heat from evaporation, and often absorb moisture. Field relubrication is necessary to minimize corrosion, protect and preserve the rope core and wires, and thus extend the service life of the wire rope.

If a cable is dirty or has accumulated layers of hardened lubricant or other contaminants, it must be cleaned with a wire brush and petroleum solvent, compressed air or steam cleaner before relubrication. The wire rope must then be dried and lubricated immediately to prevent rusting. Field lubricants can be applied by spray, brush, dip, drip or pressure boot. Lubricants are best applied at a drum or sheave where the rope strands have a tendency to separate slightly due to bending to facilitate maximum penetration to the core. If a pressure boot application is used, the lubricant is applied to the rope under slight tension in a straight condition. Excessive lubricant application should be avoided to prevent safety hazards.

Some key performance attributes to look for in a wire rope lubricant are wear resistance and corrosion prevention. Some useful performance benchmarks include high four-ball EP test values, such as a weld point (ASTM D2783) of above 350 kg and a load wear index of above 50. For corrosion protection, look for wire rope lubricants with salt spray (ASTM B117) resistance values above 60 hours and humidity cabinet (ASTM D1748) values of more than 60 days. Most manufacturers provide this type of data on product data sheets.

Cable life cycle and performance are influenced by several factors, including type of operation, care and environment. Cables can be damaged by worn sheaves, improper winding and splicing practices, and improper storage. High stress loading, shock loading, jerking heavy loads or rapid acceleration or deceleration (speed of the cable stopping and starting) will accelerate the wear rate.

Corrosion can cause shortened rope life due to metal loss, pitting and stress risers from pitting. If a machine is to be shut down for an extended period, the cables should be removed, cleaned, lubricated and properly stored. In service, corrosion and oxidation are caused by fumes, acids, salt brines, sulfur, gases, salt air, humidity and are accelerated by elevated temperatures. Proper and adequate lubricant application in the field can reduce corrosive attack of the cable.

Abrasive wear occurs on the inside and outside of wire ropes. Individual strands inside the rope move and rub against one another during normal operation, creating internal two-body abrasive wear. The outside of the cable accumulates dirt and contaminants from sheaves and drums. This causes three-body abrasive wear, which erodes the outer wires and strands. Abrasive wear usually reduces rope diameter and can result in core failure and internal wire breakage. Penetrating wire rope lubricants reduce abrasive wear inside the rope and also wash off the external surfaces to remove contaminants and dirt.

Many types of machines and structures use wire ropes, including draglines, cranes, elevators, shovels, drilling rigs, suspension bridges and cable-stayed towers. Each application has specific needs for the type and size of wire rope required. All wire ropes, regardless of the application, will perform at a higher level, last longer and provide greater user benefits when properly maintained.

Lubrication Engineers, Inc. has found through years of field experience, that longer wire rope life can be obtained through the use of penetrating lubricants, either alone or when used in conjunction with a coating lubricant. Practical experience at a South African mine suggests that life cycles may be doubled with this approach. At one mine site, the replacement rate for four 44-mm ropes was extended from an average 18.5 months to 43 months. At another mine, life cycles of four 43-mm x 2073 meter ropes were extended from an average 8 months to 12 months.

In another study involving 5-ton and 10-ton overhead cranes in the United States that used 3/8-inch and 5/8-inch diameter ropes, the average life of the ropes was doubled. The authors attribute this increased performance to the ability of the penetrating lubricant to displace water and contaminants while replacing them with oil, which reduces the wear and corrosion occurring throughout the rope. A good spray with penetrating wire rope lubricant effectively acts as an oil change for wire ropes.

In these examples, the savings in wire rope replacement costs (downtime, labor and capital costs) were substantial and dwarfed the cost of the lubricants. Companies who have realized the importance of proper wire rope lubrication have gained a huge advantage over those who purchase the lowest priced lubricant, or no lubricant at all, while replacing ropes on a much more frequent basis.

Usha Lubes Pvt. Ltd. has been manufacturing wire-rope lubricants for over 30 years. The lubricant used in the manufacturing process of a wire-rope is critical to the rope’s usage life and overall performance. Our products are designed keeping in mind our customer’s needs, thus ensuring the products they are suppliedwhich perform exactly as technically desired.

These lubricants are used in the manufacturing / servicing of wire-ropes meant for a wide variety of industries, such as – engineering, mining, haulage, elevator, fishing, thermal power plants, project & engineering, etc. Special colored lubricants used for strand identification in wire-ropes – these are also manufactured and supplied against special orders.

All lubricants manufactured by our company conform to specifications laid down by Bureau of Indian Standards (BIS). Our most popular wire-rope lubricant products (WRL-8 & WRL-55) meet and exceed both the Indian as well as international quality specifications laid down for such lubricants.

We also manufacture a REACH compliant version of our product range for customers in Europe. To know more about REACH regulations, please visit the following link (http://ec.europa.eu/environment/chemicals/reach/reach_en.htm)

Silver Streak Wire Rope Lubricant is a robust, heavy-duty lubricant that extends service life of wire ropes – even when operating in high or low ambient temperatures.

Silver Streak® Wire Rope Lubricant is made with a high viscosity index paraffin base oils, synthetic base oil and penetrating oils. This unique blends allows Silver Streak® Wire Rope Lubricant to retain consistency in extreme temperature changes. Silver Streak® Wire Rope Lubricant rapidly penetrates the inner wire rope core to thoroughly cover vital parts and provide increased wear protection. Silver Streak® Wire Rope Lubricant forms a non-tacky surface that resists dirt and abrasives, providing strong rust and corrosion protection.

Wire ropes are integral components for many buildings, machines, and structures. This material is comprised of contiguous wire strands that are wrapped around a centralized core. It is important to lubricate wire ropes in order to limit friction and prevent corrosion.

There are two main types of wire rope lubricants: penetrating and coating. A penetrating lubricant contains a solvent that transports the lubricant into the core of the wire. Once on the core, it evaporates and leaves behind a heavy, lubricating film that is capable of protecting each strand. A coating lubricant penetrates the wire slightly, and protects the outside of the cable from moisture, wear, fretting and corrosion.

Both of these lubrications are used on wire ropes, but since most failures come from the inside of the wire rope, it is most important to thoroughly saturate the core with lubrication.

Most lubricators are a made up of a mixture between petroleum and other compounds. The petroleum provides excellent corrosion and water resistance, which helps to extend the life of the wire. In addition to petroleum lubricants, grease and vegetable oils are also uses to coat the wires. These mixtures penetrate the core and are easily applied. Most cables are lubricated before they are used, but it is important to re-lubricated wires habitually.