used wire rope free sample

Maintain a record for each rope that includes the date of inspection, type of inspection, the name of the person who performed the inspection, and inspection results.

Use the "rag-and-visual" method to check for external damage. Grab the rope lightly and with a rag or cotton cloth, move the rag slowly along the wire. Broken wires will often "porcupine" (stick out) and these broken wires will snag on the rag. If the cloth catches, stop and visually assess the rope. It is also important to visually inspect the wire (without a rag). Some wire breaks will not porcupine.

Measure the rope diameter. Compare the rope diameter measurements with the original diameter. If the measurements are different, this change indicates external and/or internal rope damage.

Visually check for abrasions, corrosion, pitting, and lubrication inside the rope. Insert a marlin spike beneath two strands and rotate to lift strands and open rope.

Assess the condition of the rope at the section showing the most wear. Discard a wire rope if you find any of the following conditions:In running ropes (wound on drums or passed over sheaves), 6 or more broken wires in one rope lay length; 3 or more broken wires in one strand in one rope lay. (One rope lay is the distance necessary to complete one turn of the strand around the diameter of the rope.)

Corrosion from lack of lubrication and exposure to heat or moisture (e.g., wire rope shows signs of pitting). A fibre core rope will dry out and break at temperatures above 120°C (250°F).

Kinks from the improper installation of new rope, the sudden release of a load or knots made to shorten a rope. A kink cannot be removed without creating a weak section. Discarding kinked rope is best.

Asahi Intecc started in 1976 as a manufacturer of custom stainless-steel cables solutions and monofilament stainless wire, including small wire rope, strands and cables, plastic coated miniature cable, and miniature stainless cable assemblies for both medical device and non-medical applications.

1. IWSC (Independent Wire Strand Core): The core consists of a strand made of the same material as the outside strands of the wirerope. These strands are combined in configurations such as 3x7, 7x7 and 7x19. This structure can be used universally as a mechanical element and features excellent axial rigidity and bending flexibility.

2. IWRC (Independent Wire Rope Core): The core consists of a wire rope, around which the outside strands are twisted. The core wire rope and strands are combined in configurations such as {(7x7)+(1x19)x8} and others. This structure is used for mechanical elements that require high flexibility. As durability in the original form is low due to easy deformation under contact stress, these types are usually coated with a synthetic resin such as nylon.

In order to ensure the highest quality, we draw our own wire material in-house. Besides regular SS304 and SS316, Asahi also has its proprietary WHT (high-tensile strength) stainless-steel. We also work with tungsten and nitinol.

Asahi wire rope has been specifically designed for high flexibility and high strength. Different structure options give the possibility to meet your need as closely as possible. Example applications are angulation wires in endoscopic scopes, medical robotics forceps, etc.

(1) Cable laid and 6 x 19 and 6 x 37 slings shall have a minimum clear length of wire rope 10 times the component rope diameter between splices, sleeves or end fittings.

(c) Safe Operating Temperatures. Fiber core wire rope slings of all grades shall be permanently removed from service if they are exposed to temperatures in excess of 200o F. When nonfiber core wire rope slings of any grade are used at temperatures above 400o F, or below minus 60o F, the sling manufacturer"s recommendations shall be followed.

(3) Where rope clip attachments are used, they shall be made with U-bolts on the dead or short end of the rope and the saddle on the live end. The minimum number of clips for end attachments shall be not less than indicated in manufacturer"s tables, but in no case shall be less than three for any permanent installation. Clips shall be drop-forged steel. The clips shall be spaced at a distance equal to at least six times the diameter of the rope. All clip or clamp bolts shall be kept tight after tightening while rope is under tension.

(1) Have permanently affixed and legible identification markings as prescribed by the manufacturer, and that indicate the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one; and

Nantong Fasten Metals Products Co., LTD is located in the coastal open city—Nantong which is in the lower area of the Yangtze River. We are a professional corporation which produces a variety of standards and types of galvanized steel wire rope, ungalvanized steel wire rope, steel-wire, stranded wire and spring steel wire. Our products mainly exported to Southeast Asia, the United States, Europe, the Middle East, Africa and other countries.

YuanBo Engineering Co., Ltd., Dunamis Wire Ropes Mfg. LLP, Tokyo Rope Mfg. Co., Ltd., and Guizhou Wire Rope Incorporated Company, among others, are the top players in the bright steel wire rope market.

The global bright steel wire rope market is supported largely by the steel wire rope industry, which attained a CAGR of 3.4% in the forecast period from 2022 to 2027.

Bright steel wire ropes are general wire ropes without any coating, and free from zinc, copper, and other metallic coatings. Grease is generally used to lubricate these wires, hence preventing their deterioration. The major users of bright steel wire ropes are the oil and gas industry, shipping industry, and mining industry. Ever since the crude oil crisis, bright steel wire rope producers have seen a surge in revenue generation, especially with newer ventures for oil extraction, coal mining, and other mineral and industrial drilling.

Bright steel wire rope consumption and sales have been high in the Asia Pacific region in recent years, particularly in China, Indonesia, and India. North America and Europe are the primary areas for the global market for bright steel wire rope since they are major end-users in the oil and gas industry. During the forecasted period, the Asia Pacific countries of China, India, Indonesia, Thailand, and Malaysia are predicted to have considerable growth in the bright steel wire rope sector. Over the recent decade, China"s demand for bright steel wire rope has increased significantly, possibly because of increased steel output and infrastructure investment in lift and motion applications.

YuanBo Engineering Co., Ltd. Is the biggest bright steel wire rope manufacturer in the world. The company provides technology, solutions, and service support to meet the specific needs of customers in the pharmaceutical, chemical, fire, industrial, and other industries. As the company is located close to the northern Chinese, Tianjin port, it enjoys convenience of transport, and as a result, exports are large. It covers an area of 18000 square meters and employs more than 200 people to manufacture its goods. YuanBo exports to Europe, America, Japan, the Middle East, Africa, South Korea, and Australia.

Dunamis Wire Ropes Mfg. LLP is the largest wire rope producer in India. The various ports of Mumbai offer easy transport to other countries, hence increasing their revenue. The company provides wire ropes for a wide variety of applications such as industrial and construction work, mining, oil and gas, bridges, ski lifts, and fishing and marine.

One of the biggest wire rope manufacturers in Asia, Tokyo Rope Mfg. Co., Ltd. have built a reputation for providing the best quality in their products. The seaside ports and the immense connectivity from Japan allow for exceptional transport facilities. It is engaged in the production and sale of steel cables, steel cords, developed products, and others, the real estate leasing business, as well as logistics related business and other services.

Guizhou Wire Rope Incorporated Company is one of the largest companies specialising in steel wire rope products. The enterprise has more than 5000 employees, as they strive to achieve perfect quality control. The capacity of the company is a massive 4,00,000 metric tons a year, which they export to the United States, United Kingdom, Canada, Australia, Denmark, Netherlands, Singapore, and the Middle East.