wedge socket for wire rope pricelist

Also known as open wedge sockets, these end fittings require only a torque wrench to install. To install, wrap the wire rope around the removable wedge before securing it inside the body. A wire rope clamp attached through the top hole in the wedge secures the short (dead) end.

Two additional holes at the bottom of the wedge can be used as a "go/no go" gauge to determine the proper rope size. The wire rope should pass through the "go" hole and not through the "no go" hole.

Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.

When you hum “Santa Claus is coming to town”, do you start thinking of Christmas trees, gift boxes, or maybe the red-and-green-colored table runner? When these big celebrations come around, small pieces of decorations can boost the festive atmosphere. We are quite happy that we provide wholesalers with an extensive wire rope wedge products that may grace hundreds of thousands of festival celebrations. Try to start your shopping by typing in words such as Christmas table runners, Halloween table runners, Valentine’s table runners, and other related terms.

In terms of materials, you can select cotton, polyester, burlap, or plastic. For those families with kids, waterproof table runners are good choices. For those who like to change their table cloths now and then, the polyester ones are cost-effective. Whatever your customers need, you can get the right products here at Alibaba.com.

Are table runners only used in long or square tables? Of course not. We also offer products designed for round tables or smaller ones such as coffee tables. You can try coffee table runners, wide table runners, round table runners. Since our customers will need help in making decisions, it is better to make ourselves well prepared. Our wire rope wedge section is a good starting point. You can search for plaid table runners, beaded table runners, lace table runners or other items from your shopping list.

Wedge Sockets are a high strength, cast alloy steel. Each socket accepts at least two different ductile iron wedges. This allows the socket to be used with more than one rope size. Together, wedge and body act as a viseread more...

Our company has earned accolades for providing Wedge Sockets to the clients. Offered range is available in a plethora of sizes dimensions and finishes to suit variegated requirements of the customers. These products are available in different sizes, designs and specifications to meet our client’s diverse requirements. Wedgeread more...

CERTEX specializes in lifting technology and load securing. Whatever the lifting process in industry, ports, construction sites, mining or many other industries, CERTEX offers the right products and services. With a large product range of more than 10.000 items and access to the warehouses of our worldwide suppliers, knowledge about the wire rope and all other areas of lifting technology, we can solve your problem.

The customisation options provided are so broad that Straightpoint (SP) are also able to produce customised load pins for even ‘Utility Wedge’ and ‘Open Spelter’ type sockets.These types of sockets are often used in conjunction with several wire rope setups including:

Usually made from cast steel, these sockets are designed to be attachment points for wire ropes made of steel. When attached correctly, they are regarded as the strongest fitting types you can use to match the maximum load capacity of the cable. They are also beneficial as an on-site attachment that allows the user to make link connections efficiently. It is usually recommended that an anti-rotation wire rope is used when connecting it to a socket in order to maintain stability of the load whilst attached to the socket. The wire rope’s termination broom is usually held into place inside the spelter socket’s cone with a strong hardening gel. When terminating into a wedge socket, the end of the wire rope is threaded through the cone, bent back around the internal wedge and then gripped into place via a seizing clip.

For flexibility to match a wide variety of requirements, we are able to provide either wireless/radio telemetry (up to 700m remote monitoring) or cabled load pin types (for subsea applications). Both types can be fitted easily and without further modification to the socket. The connection to our hand held monitoring displays (HHP/SW-HHP) is also very simple saving you more time to ensure a safe lift/pull.

Usually made from cast steel, these sockets are designed to be attachment points for wire ropes made of steel. When attached correctly, they are regarded as the strongest fitting types you can use to match the maximum load capacity of the cable. They are also beneficial as an on-site attachment that allows the user to make link connections efficiently. It is usually recommended that an anti-rotation wire rope is used when connecting it to a socket in order to maintain stability of the load whilst attached to the socket. The wire rope’s termination broom is usually held into place inside the spelter socket’s cone with a strong hardening gel. When terminating into a wedge socket, the end of the wire rope is threaded through the cone, bent back around the internal wedge and then gripped into place via a seizing clip.

For flexibility to match a wide variety of requirements, we are able to provide either wireless/radio telemetry (up to 700m remote monitoring) or cabled load pin types (for subsea applications). Both types can be fitted easily and without further modification to the socket. The connection to our hand held monitoring displays (HHP/SW-HHP) is also very simple saving you more time to ensure a safe lift/pull.

• Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXI wire rope. • Meets or exceeds all requirements of ASME B30.26 including identification, ductilit, design factor, proof load and temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. • Type Approval certification in accordance with ABS RULES FOR CONDITIONS OF CLASSIFICAION, PART 1 2017 STEEL VESSELS AND ABS GUIDE FOR CERTIFICATION OF LIFTING APPLIANCES 2017 available. Certificates available when requested at time of order and may include additional charges • Basket is cast steel and individually magnetic particle inspected. • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge. • Eliminates the need for an extra piece of rope, and is easily installed. • The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. • The tail, which is secured by the base of the clip and the wedge, is left undeformed. • Incorporates Crosby"s patented QUIC-CHECK® “Go” and “No-Go” feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) The wire rope should pass thru the “Go” hole in the wedge. 2) The wire rope should NOT pass thru the “No-Go” hole in the wedge. • Utilizes standard Crosby Red-U-Bolt® wire rope clip. • The 3/8 through 1-1/8 standard S-421 wedge socket can be retrofitted with the new style TERMINATOR wedge. • Available with Bolt, Nut, and Cotter Pin. • U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents. • Meets the performance requirements of EN 13411-6. • Available with API-2C certification upon request SEE APPLICATION AND WARNING INFORMATION Page 58 Para Espanol: www.thecrosbygroup.com S-421T WEDGE SOCKETS (Assembly includes Socket, Wedge, Pin and Wire Rope Clip) * Nominal NOTE: For intermediate wire rope sizes, use next larger size socket. The S-423T Super TERMINATOR wedge is designed to be assembled only into the Crosby S-421T TERMINATOR socket body. IMPORTANT: The S-423TW for sizes 5/8” through 1-1/8” (14mm through 28mm) will fit respective size standard Crosby S-421T basket. The 1-1/4” (30-32mm) S-423TW will only fit the Crosby S-421T 1-1/4” basket marked with TERMINATOR. Copyright © 2019 The Crosby Group LLC

These Crosby Terminator Wedge Socket assemblies include the socket, wedge, pin, and wire rope clip. There are 6 options available and these sockets are made in the USA.

The Green Pin® Open Wedge Socket CP is an open wedge socket with a cotter (split) pin. The socket is made from high tensile steel, while galvanization ensures its long-term durability. Green Pin® Open Wedge Socket CP is available for wire rope with a diameter from 7-8 up to 81-86 mm.

Make allowance for the wedge socket grip efficiency. The grip efficiency can reduce wire rope breaking strength by up to 20%. After installation of the wire rope and wedge, seat the wedge by anchoring the wedge socket and applying the maximum allowable line pull to the wire rope live end.

A sudden jolt or impact may unseat the wedge. Therefore, the dead or short end of the wire rope shall be clipped with a U-bolt or otherwise made secure.

Wire rope clips used in conjunction with wedge sockets shall be attached only to the unloaded dead end of the wire rope. When a wire rope clip or other device is attached to the dead end of the wire rope, the spacing between the wedge socket and other device shall be in accordance with Gunnebo Johnson Corporation requirements. Where it is desirable to restrain the dead end of the wire rope, it is allowable to have a loop, keeper, or other device around the live end of the wire rope provided it neither restrains nor constrains the live end. Check frequently to re-tighten or re-position wire rope clips as necessary.

Each wedge socket body adapts to two or more wire rope sizes by using a specified wedge for each wire rope size. Use of any wedge other than the specified wedge will result in an improper and unsafe grip.

NOTE: Refer to the Gunnebo Johnson Corp. General Catalog for complete safety recommendations, product specifications, working load limits, ratings, and sling configurations. For additional information or questions, call: 1-800-331-5460