wire rope and rigging consultants price

A portion of our work involves performing testing and accident investigation for numerous clients. When we have needed special wire rope fabrication and proof or ultimate break testing, we have decided to call on WCWR as the provider for these operations. Whether we needed to test stainless steel, galvanized, or bright wire rope assemblies, we have willingly put our reputation on the line alongside the professional work provided by WCWR. Their investment in fabrication equipment and their exceptional attention to maintenance and quality control is among the highest in their industry. West Coast delivers on their promises and have always ensured that their technical expertise accompanies each order. Besides delivering quality assemblies, they can be counted on for immediate, quality assistance in solving field problems or unexpected challenges.

We supply all major brands while also offering non-specific vendors for price conscious programs. From meeting their timelines to providing information on our suppliers we value communication with our customers to help them make the best decisions for their safety program.

It’s never been officially chronicled, but sometime during the early 1990’s the professional work classification of “Tower Rigger” was eclipsed by “Tower Technician”, some company managers say, because the job requires a greater degree of technical knowledge to construct and maintain communications sites.

However, no matter how many newly acquired skillsets the technican has obtained, rigging knowledge is one of the most essential to ensure a safe installation of structures and equipment. Having safe, fully inspected rigging equipment is vitally as important.

C. Type 5: The endless sling is the most versatile of all nylon sling configurations. It can be used in a vertical, choker or basket hitch and the wear points can be adjusted around the circumference of the sling to increase its useful life.

F. Type 4: Twisted eye slings are similar to flat eye slings except the eyes are twisted 90 degrees to form a better choker hitch and they will nest well in a crane hook.

The same sling will have a different capacity for each hitch. The choker has the lowest capacity. The vertical hitch has an additional 25% capacity and the basket hitch is twice the vertical hitch capacity. The horizontal degree of a two-point pick will affect the load capacity of your sling

Avoid shock loading to nylon or wire rope slings when beginning your lift. The crane or hoist should be engaged slowly until the load is suspended. The speed in which you lift or lower the load should be increased or decreased gradually. Sudden starts or stops place a heavy load on the slings and load line, up to 50 times the actual weight. Once any sling has been shock loaded it must be removed from service.

Manufacturers identify their classes of wire ropes beginning with two numbers such as 6x25. The "6" means that there are 6 strands or larger wires making up the wire rope and the second number "25" means that there are 25 smaller wires laid around each other to make up each strand. The other wires in some wire ropes are called filler wire. Wire fatigue resistance will increase as the number of wires per strand increases.

Known as the industry workhorse of wire ropes, the 6x25 Filler Wire maintains a good balance between resistance to abrasion and fatigue resistance. When both abrasion resistance and fatigue resistance are  required, the 6x26 Warrington Seale is a better alternative.

Keep the wire rope lubricated so that rust and dirt will not weaken it  by acting as an abrasive on the rope as it spools through the sheaves and drums. Lubrication of the rope  allows individual wires to move and work together so that all the wires carry the load instead of just a few. Weather and other exposures can also remove

Natural and synthetic fiber rope offerings have expanded over the past years with the introduction of new materials such as Kevlar and other advancements that can provide a higher strength and a better

Recommended working loads will vary according to the rope size, type and manufacturer. Twisted rope is oftentimes has the working load listed between 10% to 15% of the tensile strength and braided rope is between 15% to 20%. Therefore, a braided rope with a listed tensile strength of 12,500 pounds might only have a safe working load of 1,850 pounds. Ropes have different qualities and you should carefully assess your rigging requirements. In example, Kevlar has a considerably higher breaking strength than most available products,

It is necessary to check with your cordage vendor to obtain the safe working load of your rope prior to purchasing it for any rigging or lifting purpose!

The working load is the maximum mass or force which any rigging product is authorized to support in general service when the pull is applied in-line, unless noted otherwise, with respect to the center line of the product. This term is used interchangeably with the following terms:

Many factors, including rope usage, load conditions and weather exposure affect the rope’s working load capabilities. You should inspect your rope daily for concentrated wear. It must be free of frayed strands and broken yarns, cuts and abrasions, burns and discoloration. If there is excessive soiling or paint buildup, place it out of service. Check for chemical or heat damage and ultraviolet deterioration. This type of degradation is indicated by discoloration and the presence of splinters and slivers on the rope surface. Do not use wire rope or V-belt sheaves for synthetic rope as the rope will be pinched inside.

Basic requirements for rigging safety can be found in OSHA standard: 29 CFR 1926.250-251, subpart H. By following the recommendations by manufacturers and being in compliance with ANSI/ASME standards you’ll provide a safe working environment.

We recommend that you contact our rigging supply companies to obtain additional information about their products and services.Many of our viewers have requested information about knot tying for rigging. Instead of duplicating the wealth of information that is already available, it"s easier to purchase one of the rigging books that are available or visit www.animatedknots.com . It provides a wealth of information with animated features and is oftentimes used by tower crews for training.

Unirope LTD. is an ISO 9001 and LEEA-Lifting Equipment Engineers Association certified company, specializing in the manufacturing, distribution, testing, certification and inspection of Lifting- and Rigging Products. Unirope is servicing the industry since 1956.

In Germany we manufacture High Performance PYTHON® Wire Rope which we stock in a wide variety of constructions for Tower Cranes, Mobile and Truck Cranes, Overhead Cranes, Gantry Cranes in Construction, Automotive and the Steel Industry. We also stock a large variety of standard and custom designed ropes meeting national and international standards.

The SLINGMAX® product line includes TWIN PATH® Slings made from high strength K-SPEC® fibres, super flexible GATOR FLEX® and TRI-FLEX® wire rope slings, and much more. We also provide a complete range of wire rope fittings, rigging hardware, magnets, clamps, hoists, synthetic ropes, and all types of lifting slings. Find Out More ›

ITI has been an innovator and pioneer in rigging training for nearly 30 years and conducts more rigging training for corporate clients in North America than any other provider due to its expertise, size of training staff, and deep course curriculum. Under the broader category of Rigging, courses are further classified into the following sub-categories:

The “meat and potatoes” of rigging training. ITI Rigging Applications courses cover the full gamut of skill and experience levels with options available for true neophytes to seasoned veterans and everyone in-between…

Removal criteria for wire rope, wire rope slings, synthetic web/round slings, chain slings, rigging hardware, and below-the-hook lifting devices is the focus here. Personnel qualification is available.

ITI endorses the national certification program offered by the National Commission for the Certification of Crane Operators (NCCCO) and provides training to prepare candidates for NCCCO written and practical exams. Exam administration with Certified Practical Examiners (ITI Instructors) is also offered.

Designed for lift planners, crane and rigging managers, and other non-engineers who conduct lift planning activities, ITI’s Fundamentals of Rigging Engineering courses are LEEA accredited and approved by ASME.

ITI offers signalperson training for personnel who use hand and voice signals in crane operations. Qualification and Certification Exams through NCCCO are offered.

Welcome back to Safety Factor. In this episode, we are talking about in-house safety programs. How you can you start one, how can you improve yours, and how can you be a better safety coordinator.

Today, we"re joined by Mazzella Companies" Kevin Paul, Director of Safety, and Alana Cohen, Safety Coordinator, to discuss how they got their start in the world of safety, how they helped develop Mazzella"s safety program, and what wisdom they"ve learned along the way.

Be an active participant in workplace safety and identify job safety hazards before they cause an accident or injury. How to Identify Workplace Hazards by Performing a Job Safety Analysis (JSA):

Five of the most common observations from the field that could prevent you from reaching 100% compliance with OSHA and ASME requirements. 5 Reasons Your Lifting & Rigging Program Isn’t OSHA/ASME Compliant

How Can Lifting and Rigging Training Help My Company Maintain OSHA Compliance? OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?

We know the importance of quality when it comes to rigging hardware. Whether you"re in the construction, logging, excavating, marine, or dredging industry, trust our rigging hardware to get the job done safely and correctly.

With teams of dedicated product and industry experts, US Cargo Control has the knowledge and resources to help you and your business grow and succeed.

Material options for rigging hardware includes galvanized steel, cast-iron, and more. For marine rigging applications, stainless steel hardware will better resist corrosion and severe weather.

Connect lifting slings, wire rope, and chain with shackles. Adjust the tension in steel cables, tie rods, and more with quality turnbuckles. Reduce required lifting force with lifting blocks and pulleys. Easily splice and seal wire rope with rigging sleeves and stops. Anchor your rigging assembly with eye bolts in a variety of styles and finishes.

Our wide selection of rigging hardware and rigging accessories also includes lifting links, wire rope clips, wire rope thimbles, lifting hooks, stainless steel nuts, and more.

CLEVELAND, OH – Mazzella Lifting Technologies, a Mazzella Company, is pleased to announce the acquisition of Denver Wire Rope & Supply. This acquisition will strengthen Mazzella’s footprint west of the Mississippi River and reinforce Mazzella’s commitment to be a one-stop resource for lifting and rigging services and solutions.

Denver Wire Rope & Supply has been in business since 1983 and services a variety of industries out of their location in Denver, CO. Denver Wire Rope & Supply is a leading supplier of rigging products, crane and hoist service, below-the-hook lifting devices, and certified rigging inspection and training. Effective immediately, Denver Wire Rope & Supply will operate as Mazzella / Denver Wire Rope. Terms of the transaction are not being disclosed.

“Denver Wire Rope & Supply will complement the wide range of products and services that Mazzella Companies offers. We are dedicated to being a single-source provider for rigging products, overhead cranes, rigging inspections, and rigging training. Both companies commit to a customer-first mentality, providing the highest-quality products, and leading by example when it comes to safety and sharing our expertise with customers and the market,” says Tony Mazzella, CEO of Mazzella Companies.

This acquisition will provide Mazzella Lifting Technologies with a western U.S. location that will allow them to grow and expand their reach past the Oklahoma City market.

“Our team and family are excited to be part of the Mazzella Companies. This acquisition strengthens our place in the market and allows our team to continue to provide excellent service and products to our valued customer base and expand our offering,” says Ken Gubanich, President of Denver Wire Rope & Supply.

“Over the years, we have had numerous companies show interest in purchasing Denver Wire Rope & Supply, none seemed to be the right fit. We are looking forward to becoming a part of an aggressive, passionate, and progressive organization. As a family business for over 36 years, it is important to us that our customers/friends, suppliers, and team members continue to be treated with first-class service, products, and employment opportunities. Again, we are very enthusiastic about our future and look forward to being a quality supplier for your crane, safety training, rigging, and hoisting needs for years to come,” says Gubanich.

“We wish Ed and Carol Gubanich all the best in their retirement. We welcome Ken and the other second and third-generation Gubanich family members, as well as the entire Denver Wire Rope Team, into the Mazzella organization,” says Mazzella.

We’ve changed our name from Denver Wire Rope to Mazzella. Aside from the new name and logo, our member experience is virtually unchanged. Here are some common questions and answers related to this change.

In 2019, Denver Wire Rope & Supply was acquired by Mazzella Companies to expand lifting and rigging products and services to the western half of the United States.

In 1954, James Mazzella founded Mazzella Wire Rope & Sling Co. in Cleveland, OH. For over 65 years, the company has grown organically by nurturing historic relationships, expanding its product offerings, and entering new markets through acquisition.

Today, Mazzella Companies is one of the largest privately held companies in the lifting and rigging industries. Since our humble beginnings, we’ve grown to over 800 employees with over 30 locations across North America. Our product offerings have expanded from basic rigging products, to include:Overhead crane fabrication

One thing that hasn’t changed is our commitment to a no-excuses, customer-first mentality that extends from the shop floor to the front office. Some of the major markets Mazzella serves are: Mining, Steel, Oil & Gas, Construction, Energy, Shipbuilding, Vehicle and Durable Goods. Mazzella’s diverse portfolio includes Sheffield Metals a manufacturer and distributor of coated bare metal products for engineered metal roof and wall systems. New Tech Machinery is a manufacturer of portable roof panel and gutter machines—recognized as the world’s finest portable rollformers.

Just the name. We want to be clear that our people, locations, products, and services have not changed. We will be moving to the Mazzella name for all rigging brands under the Mazzella Companies umbrella in order to create a better experience for our customers and employees.

With all the Mazzella rigging locations working as one team and under one name, your level of service and support will be improved exponentially. Nothing will change in terms of the local team you’re used to working with. The same people will still be here—the only thing that will be changing will be the name of the organization they work for. You now have more resources, inventory, and clearer lines of communication. Our goal is to improve your experience and instill confidence and comfort in every interaction.

Mazzella is experiencing rapid growth. With this growth, we can better serve our customers as one team under the Mazzella name, versus many companies operating independently. The only change you will experience will be better service and improved lines of communication between our people and yours.

For sure! We hope to expand our service line across the entire United States. With over 30 locations, your level of service should only be improved and lines of communication more clear.

How much does a wire rope sling cost? How much does a shackle or a web sling cost? These are legitimate questions that we hear every day from prospective customers looking to purchase rigging products for their next lifting project.

Similar to other consumer goods like cars, electronics, and appliances, there are several factors that can raise or lower the price of rigging equipment. Our intention in this article isn’t to beat around the bush, but instead we want to provide you with some practical guidelines, as well as influential factors that can affect the cost of lifting and rigging products, including:Where do you buy your rigging gear?

Like most products and services, rigging gear can be purchased from a traditional brick and mortar location, or can be purchased online through a specialty supplier or catalog and supply house with an e-commerce site. If you’ve done some research and looked at different online suppliers, you’ll notice that there can be a huge disparity in pricing between the same types of rigging products for sale online and in a physical rigging shop.

For instance, a common Eye and Eye 2” Wide, Two-Ply Web Sling (EE2-802 X 10’) had the following prices listed on three different e-commerce websites: $24.00, $32.00, and $42.00. That same web sling was being sold for $26.00 at a brick and mortar rigging shop.

Rigging shops have long been the stalwarts of the lifting and rigging industries. Rigging shops typically have a showroom or storefront with a wide selection of sling hooks, shackles, chain, synthetic slings and wire rope. They also traditionally buy the raw materials for wire rope, webbing, steel and chain and have a shop where they can make the lifting and rigging products themselves.

The variety of rigging equipment and expertise that the rigging shops offer is unparalleled as you can speak directly with a knowledgeable salesperson to get a product recommendation. They also offer added convenience—if they have the part(s) that you’re looking for in stock, you can stop in that same day and walk out the door with what you need. This also eliminates the added expense of paying for freight to ship rigging equipment that can be large and heavy.

But do they have the best prices? Sometimes they do, but most of the time they fall somewhere in the middle of the price spectrum. The same web slings we mentioned earlier had prices ranging from $24.00 to $42.00 from three e-commerce retailers. A rigging shop might fall somewhere in the middle around $26.00 for that same web sling.

Many rigging shops pride themselves on carrying product in bulk and in a full range of sizes and configurations. While this is convenient for the customer, it also increases the shop’s inventory carrying costs, which get passed on to the end-user as a premium item price increase.

If you’re looking for the added benefit and expertise of speaking with a knowledgeable salesperson, want to browse an extensive inventory, and may have an immediate need for a piece of rigging hardware, chain sling, roundsling, or wire rope, then a rigging shop might be your best bet.

More and more, it’s becoming commonplace to order rigging gear from online retailers. For those that don’t need product variety, or value in-store sales expertise, many rigging shops and industrial suppliers are offering their products for sale through their websites, as well.

A common 1/2” X 10’, 6 X 25 Wire Center, Wire Rope Sling comes in at $29.00, $43.00, and $67.00 from three different online retailers. So, why is there such a wide pricing range for what appears to be the same product?

When doing some rigging cost comparisons, you may notice that the lowest prices seem to come from the websites that only sell lifting and rigging equipment. However, these lifting and rigging websites tend to focus on the common “bread and butter” lifting and rigging equipment and may not have a large inventory of rigging products to select from. They may also make up for their low prices by bumping up the cost of their shipping and handling fees.

Online suppliers with the more expensive wire rope and web slings tend to be larger catalog and supply houses that offer an impressive array of all types of industrial products, including rigging gear. They also offer the convenience of selling items like gloves, eye protection, spray paint, etc.—an added convenience factor that allows you to buy everything that you need from one source.

Catalog supply houses may also offer prepaid freight, or have cheaper shipping rates since they move so much product in and out the door that they receive volume freight discounts that they can then pass on to the customer.

Basic lifting and rigging gear has many options and price ranges as we noted above. When you get into non-standard sizes and lengths, your choices of where to buy are reduced due to the special nature of these products, and this leads to an increase in price, as well.

Size is always a factor when it comes to the cost of lifting and rigging products. For example, a 1-ton screw pin anchor shackle can be found for around $9.00 per piece, a 9.5-ton shackle sells for around $80.00 a piece, and a 25-ton shackle can run close to $300.00 per piece. Simply put, the more steel and more material required to produce the product, the more it’s going to cost you.

This is also true for lengths of wire rope and chain. Larger diameter wire rope, and larger and longer lengths of chain and wire rope, often fall out of the “standard” product range of suppliers other than rigging shops. If a shop has to special order a piece due to a non-standard size or length, that extra time and effort to acquire the piece will get passed on to the customers as a price markup.

The complexity of the rigging products you buy also has an effect on your cost. A simple 1-ton 4’ lifting beam can be mass-produced by a supplier and can be bought in a range anywhere from $600.00 to $800.00. A beam that has to be specially-engineered due to non-standard lifting points, bail heights, load engagement requirements, etc., can easily double the price of a standard beam. The engineering of specialty items requires additional labor, and smaller raw material batch purchases, which add up to additional costs to make a small production run or fabricate a custom one-off piece.

High-performance and specialty items also cost more. For instance, 3/4″ 6 X 37 with wire center rope would cost around $2.50 per foot. A high-performance cable like a 3/4” Dyform 18 would cost about $4.50 per foot. But in the right application, the Dyform 18 will last much longer to justify the higher initial cost, and may also save labor costs because the customer won’t have to perform cable changes as frequently.

If you’re at your factory or job site and have a lifting application but don’t know how to make a lift or what to use to make the lift…what should you do? What most people do is contact their local rigging shop to speak with a lifting specialist. Hopefully, the shop’s specialists can help walk you through the solution over the phone, or they may prefer to come on-site and assess the job and recommend the best lifting solutions for your project.

However, highly-trained lifting specialists are compensated for their time and knowledge applied to a lifting project and therefore will increase the cost of your rigging solution. Unfortunately, you’re not going to solve your problem by e-mailing a catalog house or e-commerce rigging website’s customer service team. Their businesses are built to move rigging hardware, wire rope slings, chain slings, and synthetic slings out the door in a quick and efficient manner.

They’re not necessarily set up to offer support, troubleshoot, or help solve lifting challenges. Utilizing a lifting specialist might cost you more upfront, but will save you time and money in the long run by increasing your lifting efficiencies and providing a solution that will get the job done safely.

The cost of imported vs. domestic rigging products is a bit more involved and complicated. You have to determine if you are comfortable with an import product based on the country of origin and also make sure that it meets the same quality standards and specifications as its domestic counterpart.

Generally, imported products are cheaper in price, and in many cases, the quality is comparable to products made domestically. For instance, an imported 1/2” x 10’ 6 X 25 swaged wire rope sling would cost about $20.00—the same sling made by a company who manufactures their rigging gear in the United States would charge around $30.00.

For companies that import their rigging products, their business is built on offering their customers standard run-of-the-mill rigging products in the most popular sizes and configurations. Their manufacturing locations are built to churn out product in large batches and operate with little to no overhead. By doing so, an import supplier can offer their products at a discounted price. Unfortunately, they can’t offer their customers much in terms of variety or customized solutions.

The amount, or the quantity of pieces that you’re buying, can also greatly influence how much you pay for lifting and rigging equipment. If you buy from the right source, you may save more per item, or per foot, the more that you buy.

If you do a little bit of research online, you’ll see that some of the companies that sell lifting and rigging equipment offer quantity discounts and some do not. You may see some promotions like “free shipping for orders over $50.00!” If you buy rigging equipment with some regularity, then you know that $50.00 is not a high bar to reach. You may recall from earlier in this article that one 9.5-ton shackle costs around $80 per piece, so you can hit that minimum pretty easily with the purchase of only one part.

E-commerce sites that offer deals like free shipping on lifting or rigging equipment seem to target the smaller end user—mostly contractors or small construction companies that make up a large portion of the rigging buyer’s market.

The shops that are going to offer the most significant discount to their customers will be the brick-and-mortar rigging shops. They can, and will, offer substantial discounts for a large-quantity order, or for their high-volume customers.

Let’s face it, medium to large users of rigging equipment are not going to order their rigging products online—they will overwhelmingly buy from rigging shops because they can utilize their staff’s expertise, and also take advantage of rush or same-day delivery—two things that online sellers of rigging equipment and industrial equipment just can’t compete with.

If you’ve ever worked in a retail or service-based environment, you already know the typical customer response to the question, “when do you need it by?” The answers are often, “yesterday!” or “as soon as you can get it to me….today.” No matter what the answer is, the theme in the lifting and rigging industry is usually, “I need it now.”

So, now the pressure is on the seller to deliver the product within their customer’s time frame, or else risk losing the business. One thing that many people don’t understand is that it costs a company more money to structure itself to handle rush orders, same or next-day deliveries, and emergency repair or replacement for rigging equipment. Some of these added expenses include:Maintaining a large and diverse inventory to ensure product is in stock and available for fulfillment

These extra expenses to the seller may present themselves in the form of an additional fee for rush delivery and fulfillment on your order, or you may see it as a higher cost in freight. And you know what? You may be okay paying a few extra dollars for a sling from a local rigging shop if you know that they’re equipped to deliver an emergency replacement if your equipment were to break or fail.

Bottom line, rush orders increase the cost of your rigging products. However, if you have smaller quantities, know what you want and can wait a few days to receive your equipment, then the online rigging stores and catalog and supply houses are still a very viable option for you.

The least expensive option isn’t always the smartest buy. Research, due diligence, and working with industry experts will lead you to the best product for your application and ultimately, the best bang for your buck in the long run.

Benjamin Franklin once said, “An investment in knowledge pays the best interest.” Where you buy, what you buy, how much you buy, and how quickly you need it, all have a major determination on the price that you’ll pay for lifting and rigging gear. The time that you spend determining how these factors can get you the most value for your rigging dollar will be well spent.

At Mazzella, we provide ideal lifting solutions—offering all styles of lifting slings, rigging hardware, wire rope, overhead cranes and hoists, and engineered lifting devices. We also have locations all across the United States—fully stocked with different sizes and configurations of rigging products for your next project.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Olsen Chain & Cable wire rope and cable slings allow you to safely lift even the most difficult loads. Cable and wire rope slings are manufactured with various grades of wire rope with different rope lays (the direction the wires and strands are twisted). Olsen Chain & Cable also manufactures Independent Wire Rope Core (IWRC) or fiber core.

Olsen wire rope and cable slings allow you to safely lift even the most difficult loads. They are strong, safely grip and lift some hot materials, and are built to better tolerate abrasive wear. We produce various types, including:

Wire rope slings are manufactured with various grades of wire rope using different rope lays (the direction the wires and strands are twisted). Olsen Chain & Cable wire rope slings are strong, bend without distortion, safely grip and lift even hot materials and are built to handle abrasive wear. We produce various types, including Independent Wire Rope Core (IWRC) or fiber core.

If fiber core wire rope slings are exposed to temperatures above 180° F (82° C), retire these slings. For metallic core wire rope slings of any grade, follow manufacturer’s recommendations on use at temperatures above 400° F (204° C) or below minus 40° F (minus 40° C).

Most wire rope slings are made of Independent Wire Rope Core (IWRC) or fiber core. Fiber core is a bit more flexible but less resistant to environmental damage. Wire rope core has great strength and is more resistant to heat damage.

Properly match components. Ensure that the fitting is the right shape and size so it accurately seats in the hook or lifting device. For multiple-leg slings used with nonsymmetrical loads, have a qualified person do an analysis so you don’t overload any leg. Select multiple-leg slings according to OSHA guidelines for wire rope slings.

OSHA rates loads based on material strength, design factor, type of hitch, angle of loading, diameter of curvature over which the sling is used and fabrication efficiency. Never exceed the working load limit and avoid shock loads. Refer to OSHA guidelines for wire rope sling rated loads.

Properly hitch slings, pad sharp edges, balance loads, don’t drag slings, keep them free of knots or twists and don’t pull a sling from under a load when the load is on the sling.

Have each person who will use your wire rope sling know and follow its type of load, hitch and rated load capacity. Contact us for clarification. Follow other safe operation procedures, including selecting the right sling, keeping people safe distances away from the sling and its load during movement, properly rigging loads and inspecting all slings daily and according to OSHA-approved ASME guidelines.

Do not use worn or damaged slings or attachments. Discard or refurbish them. Use damaged slings only after they are reconditioned, and proof tested by the sling manufacturer or a qualified refurbishing source. Keep certificates of proof test. You may also use Olsen Chain & Cable’s lifting equipment inspection services

Miami Cordage & Florida Wire & Rigging Works is a family owned and operated manufacturer and distributor of fiber and wire rope, custom lifting and boating assemblies, rigging supplies and hardware. We originally began as a distributor of marine and industrial supplies to the Southeastern U.S. and Caribbean Basin. Over the years as both our business and market expanded, we began manufacturing fiber rope and acquired Florida Wire & Rigging Works. Today, our manufacturing capabilities continue to grow and we are now the only fiber rope manufacturer in the U.S. that creates custom-color double braid and 12-strand rope. In addition, relatively new to our product line is Dyneema SK-75 fiber rope and a 3-strand nylon rope with a specialty coating designed specifically for use with windlasses.