wire rope bunnings made in china

2023-05-21 21:22:12

Shandong Bangyi Metal Products Co., Ltd. is located in Shuiwan Town, Wudi County, Binzhou City, Shandong Province.We have 10 years experience of R & D and production,the plant covers 10000 square meters.Our product steel wire rope is widely used in logistics, electricity, construction,ports and one- time cable seal industry,etc. Our products are with beautiful surface, good verticality,good looseness and compactness,no burrs,and no broken rope in one reel.We are manufacturer, strict with quality and production progress. We also have a professional pre-sales and after-sales service team, to ensure the quality and services.

wire rope bunnings made in china

4Packagestainless steel wire rope for railing systems On strong wooden wheel, plastic reels ,wrapped with PP cloth, with label on the reel side and then pack by wooden pallets or wooden crates before shipping. or According to customer"s needs.

wire rope bunnings made in china

Multi-strand steel wire rope 7x19 steel wire rope, specifications: 0.3mm to 40mm stainless steel wire rope, material: 304 A2 1.4301 (optional 316 A4 1.4401) 304 stainless steel wire rope, suitable for use in outdoor environments. Strong plasticity Single soft wire can be shaped at will 304 high temperature resistance,...

In addition to the wear of the outer layer of the steel wire, the wire rope is mainly broken due to metal fatigue caused by repeated bending when bypassing the pulley and drum. Therefore, the ratio of the pulley or drum to the wire rope diameter is an important factor in determining the life of the wire rope. The...

Model NO. 304 Stainless Steel Wire Rope 7x7 6mm Surface Treatment Bright Material Stainless Steel Stainless Steel Grade 304 ( 316 Optional ) Diameter 6mm ( 0.3mm to 40mm Optional ) Finish Bright & Dry & Smooth Lay Rhrl Rhol Customized Logo Yes Customized Packaging Yes Lead Time 3 to 15 Days Packing Length 1000...

Model NO. DIN 3060 Surface Treatment Bright Trademark Tianli Transport Package Stainless Steel Wire Rope All Packed by Clean Plyw Specification 65X65X65 cm Origin China HS Code 731210 Model NO. DIN 3060 Surface Treatment Bright Trademark Tianli Transport Package Stainless Steel Wire Rope All Packed by Clean Plyw

Surface Treatment Bright Trademark Tianli Transport Package Stainless Steel Wire Rope All Packed by Clean Plyw Specification 65X65X65 cm Origin China HS Code 731210 Surface Treatment Bright Trademark Tianli Transport Package Stainless Steel Wire Rope All Packed by Clean Plyw Specification 65X65X65 cm Origin China

Model NO. SS 316 Wire Rope Surface Treatment Bright Material Stainless Steel Stainless Steel Grade 316 A4 1.4401 ( 304 A2 1.4301 Optional ) Diameter 7mm ( We Can Produce 0.3mm to 40mm ) Finish Bright & Dry & Smooth Lay Rhrl Rhol

Model NO. SS 316 Wire Rope 7x19 Surface Treatment Bright Material Stainless Steel Stainless Steel Grade 316 A4 1.4401 ( 304 A2 1.4301 Optional ) Diameter 7mm ( We Can Produce 0.3mm to 40mm ) Finish Bright & Dry & Smooth Lay Rhrl Rhol Customized Logo Yes Customized Packaging Yes Lead Time 3 to 15 Days Packing...

Model NO. SS 304 Wire Rope 7x19 Surface Treatment Bright Material Stainless Steel Stainless Steel Grade 304 A2 1.4301 ( 316 A4 1.4401 Optional ) Diameter 12mm ( We Can Produce 0.3mm to 40mm ) Finish Bright & Dry & Smooth Lay Rhrl Rhol Customized Logo Yes Customized Packaging Yes Lead Time 3 to 15 Days Packing...

Model NO. SS 304 Wire Rope Surface Treatment Bright Material Stainless Steel Stainless Steel Grade 304 A2 1.4301 ( 316 A4 1.4401 Optional ) Diameter 12mm ( We Can Produce 0.3mm to 40mm ) Finish Bright & Dry & Smooth Lay Rhrl Rhol Customized Logo Yes Customized Packaging Yes Lead Time 3 to 15 Days Packing...

Plastic-coated steel wire rope for steel structure is made of plastic-coated steel wire, plastic-coated strands twisted or plastic-coated steel wire rope, also known as plastic-coated steel wire rope. The surface of the plastic-coated steel wire rope looks more beautiful, and the structure is more stable, which can...

Stainless steel wire rope has many characteristics such as high temperature resistance, good fatigue resistance, excellent breaking force, long service life, durability, etc. It is widely used in coal, petroleum, metallurgy, chemical industry, ships, bridges, electricity, rubber, military industry, tourism, water...

wire rope bunnings made in china

Surface Treatment Bright Wire Gauge 1.2~400mm Steel Grade Ss201/304/304L/316/316L/310/321 Surface Peel,Turning,Grinding Trademark Tainli Transport Package 6m, Customizable Specification 1.2~400mm Origin Jiangsu HS Code 7222110000 Surface Treatment Bright Wire Gauge 1.2~400mm Steel Grade

wire rope bunnings made in china

The Coronavirus pandemic has created a huge demand for sneeze screens. In many offices, shops, bars, and hairdressers a hanging sneeze screen is both an economic and effective solution. We produce our own range of hanging sneeze screens. Moreover, we have assisted countless sign companies, shopfitters, and industrial curtain manufacturers with wires, fittings, and components for hanging perspex screens as well as many other ingenious designs of suspended clear plastic sneeze guards. In this case, we do not supply the plastic panels, we supply the wires and fittings to hang plastic sourced elsewhere.

Materials suspended using our fittings include rigid acrylic and polycarbonate, semi-rigid PET, and flexible screens made from PVC and other types of clear plastic. Our solutions encompass fittings to attach to the ceiling - plasterboard, ceiling grids, magnetic components, and fittings to loop over roof trusses or trunking. At the lower end of the wire, we offer an array of neat fittings, clamps, and hooks each with in-built fingertip height adjustment. In summary, in this section, you will find ways to hang sneeze screens of every type from virtually any ceiling.

Hanging wires or suspension cables, hook fittings or sign panel grippers, ceiling or bulkhead anchor points. The sign hanging hardware can be purchased in sets or as individual wire rope components for mix and match convenience.

Adjustable cables, frame hanging wire or fittings which provide for fine height adjustment are an essential feature of picture hanging systems or any poster hanging kit. Signs must be displayed dead level and poster hanging arrays must be perfectly aligned. An adjustable hook at the bottom of the wire or a cable holder incorporating a clutch mechanism mounted on the ceiling is a vital element of any hanging system.

Our wire hanging display fittings are also used for lighting systems, shopfitting, visual merchandising, art galleries, suspending cable trays, and other mechanical and electrical services.

Display fixtures and fittings for suspending signage are available as a convenient sign hanging kits or as individual components. The different sign hanging kits have been carefully assembled to suit differing circumstances: screw-to-ceiling versions, magnet attachment wire fittings, fittings to hang signs from suspended ceilings. These are also referred to as false ceilings or grid ceilings, and we have the hardware to attach easily and reliably to standard ceiling grids.

There are several ways to hang posters - the choice will depend on the size and weight of the poster and the type of ceiling. For smaller lightweight posters POS-type fittings are a perfect low-cost answer. The range of POS hanging systems includes adhesive ceiling buttons and double-ended hooks which latch onto our poster bars. Wire POS hooks can also be supplied in a style that is easily stretched to the required length (Jet Set wires).

Sign supplies for suspending signs include wire rope or cables; wipe rope accessories such as wire rope hooks and various ceiling fittings. These can be anchors which screw to the ceiling, magnetic wire end fixings and suspended ceiling fixings.

Unless the hanging signs are really heavy 1.2mm cable with 7x7 construction or a 1.5mm wire display system is perfectly adequate. Each cable and the associated wire fittings will support a weight of 10kg with a considerable margin of safety. These wires look inconspicuous but they are capable of taking a significant load. Galvanised steel wire is generally supplied but the components can equally be used with stainless steel cables. Wire end fixing points are reliably engineered.

wire rope bunnings made in china

Belief to start with, devoting about the food packaging and environmental defense for Pneumatic Terminal Crimper, Hand Crimping Tool, Wire Stripper. It really is a good way to further improve our goods and service. We constantly improve the fair and just incentive and distribution mechanism, and create a team atmosphere of unity and mutual assistance. We will serve the society with first-class product quality and "new normal" operation mode.

Since our PVC Coated Stainless Steel Bridle Crane Wire Rope Slings Cable with Hook and Loop is manufactured with precision, complete varieties and excellent quality, we have long-term cooperation with famous large-scale manufacturers at home and abroad, and are well received by customers. We have established a close cooperative relationship with our colleagues in collaborative research and development to expand the market, and we believe that we will be able to create a better future. Our company has strong technical force and long-term accumulated production management experience. Our equipment is advanced and our products are complete.

wire rope bunnings made in china

Part of the popularity of American hardware stores is the range of services they provide. Most retail outlets only sell goods, while some hardware stores custom-make or repair a large variety of household items. It is common for a hardware store in the U.S. to repair broken windows and screens, repair power equipment such as lawn mowers, re-key entry locks, make copies of house keys and car keys, re-wire lamps and vacuum cleaners, sharpen knives and cutting tools, make minor repairs to faucet and shower parts, repair kerosene heaters and cut and thread plumbing pipe to sketch.

In the United Kingdom, hardware stores can be known as DIY stores and home improvement stores. British retail chains include B&Q, Homebase, and Wickes. Australian hardware chain Bunnings opened their first shop in St Albans in February 2017 and planned to convert several other Homebase shops into pilot Bunnings shops after acquiring them in February 2016.

Indian hardware stores are similar to hardware stores around the world, offering products from several categories such as plumbing, machinery, household, gardening, manufacturing, cobbler, carpenter, and electrical. Commonly found items in a typical Indian hardware store include: PVC pipes, taps, paints, hand pump, nut, bolts, pots, broom, wiper, lock, bulb and lights, wires, paint, drums, knife, bottle, jars, plastic, rubber, thread, rope, bucket, jug, glass, tub, screw, hammer, hanger, net and door lockers.

In Australia hardware stores specialise in Home Décor and include large selections of paint. There are three major hardware companies in Australia: Bunnings Warehouse, Mitre 10, and Danks (Home Timber & Hardware). Danks is a retailers" co-operative and has many banners which store owners trade under.

Since the acquisition of Bunnings by Wesfarmers in 1994, the big-box store concept has changed how new hardware stores are built. In 2004, Mitre 10 built its first supercentre Mitre 10 "MEGA" with an average store size of 13,500 m2. These were later either closed or turned into large-concept Mitre 10 stores. In 2011 Masters Home Improvement entered the market and has since opened more than 49 stores, with an average footprint of 13,500 m2. Masters Home Improvement, which was the second-largest hardware chain in Australia, closed in December 2016.

Bunnings also operates in New Zealand, competing against Mitre 10 New Zealand and Hammer Hardware. The Australian Bunnings Warehouse and Mitre 10 Mega format have also been introduced to New Zealand.

wire rope bunnings made in china

There seems to be a theme running through a few recent posts about Bunnings ceasing to carry name brand stock. I think I"ve been subconsciously noticing it myself for some time, the larger number of cheap brands in the tools section and the gradual removal of trade quality tools.

Yesterday I was in the Nerang store and noticed all their Estwing hammers were in the remainders bin. I think there were just Prager and Trojan on the stands. I know a lot of people would prefer to staple chipboard together with air power, but somehow it just seems to me that Bunnings is doing the same thing to hardware that Coles and Woolies did to groceries. Grab the market then replace the name brand stuff you can"t buy anymore from the reduced opposition with cheap, poorer quality, no name stuff.

bunnings target group is people that are soley motivated by price and nothing else matters. That"s actually a good thing. The smaller retailer can then specialize in good quality tools and supplies. And bunnings can stick with what they do best - supporting the indian and chinese economy by selling crap. That"s what happens when you let economists decide a an organizations direction. Guess what I"m studying in uni...:doh:

Good example. I"ve been looking for a certain type of punch that are not easy find. It"s a two headed punch joined by a spring in the middle. They work so well that mine always got stolen by those that thought they needed it more than me. Bunnings of all places had them. Being one who"s suspitious of anything bunnings sells I took a good close look at it. Sure enough the package said made in India - that"s strke one. So only one thing to do - take it out of the package and have a closer look. The steel wasn"t even hardened; the tip was real easy to mushroom - strike two. Pulled the two heads apart to test the spring and guess what; the spring is also mild steel - strike three. All they were asking for it was $1. Wouldn"t even take one if they were giving them away.

I also bought some steel shelving from bunnings. Thought there shouldn"t much the chinese manufacturer could screw up. WRONG. Nothing would fit together with out significant forceful manipuation. Ended up throwing away the first box of shelving and taking back the rest. That was six months ago and I haven"t or ever plan to buy anything else from bunnings - it a glorified junk store.

Back when I last installed a watering system (remember those?), I had to get a few more fittings after the local garden centre"s hours. A trip to Bunnings was wasted...crappy brittle plastic fittings of visibly poor quality at twice the Nylex price.

Actually there was another thread about the dumming down of Bunnings... although I was talking about the dumbing down of Bunnings staff. :roll: But it just gets plain dumber!!

Okay so awhile back we noticed a dumbing down of Bunnings staff... around the country it appeared that someone had decided that Bunnings only required staff that had less than a full picnic in the top paddock and knew as little as possible about anything in store... and failed to give adequate knowledgable training when they hired them... well geez not hard to see why! :doh:

And now we find someone thinks that Bunnings is dumbing down the stock they sell... taking out the high end gear and tossing up the Indian Chingalese and Tiwanese crap... in other words moving from high cost slow moving high end gear to low cost fast moving crap that for the most part shouldnt even be sold... and we wonder why?

There is a serious movement on through various media to get EVERYONE doing their own thing with DIY programs showing how EASY simple and quick it is to DIY and how happy you will be doing such a simple thing... AND some of those shows are linked VERY heavily to Bunnings... so as these new ubeaut turned on to DIY by the idiot on the idiot box that tells them the price at Bunnings and shows them with great joy and relish how easy it is to DIY ANYTHING so Bunnings being the only hardware store name shown on the show... hell they even do the show at Bunnings every now and then!! and give prices!!

What I reckon is a hoot is the way they give say 3 prices for a different thing like say wheel barrows... to show how different the items are for a different price... ALL within Bunnings only items sold by Bunnings!... they dont compare with M10 Home hardware or any other one JUST BUNNINGS!! AFLAMINMAZING!!... comparing the range of wheel barrows and the range of price... but Bunnings only :roll:

Now thats not to say the new ubeaut DIYer is dumb... just he wants to get in and do it just like Rob did on that show the other night so they take his advice and go to... Bunnings... and shell for the stuff he quotes on his segment of the show... and so instead of say Triton which by the way Im yet to see Rob use any Triton on that show... they by Ozito GMC etc... and Bunnings moves a bunch of cheep gear to a dumb DIY (Please read uninformed) and instead of going to M10 or HH to do a comparison they THINK its already been done!! cause they did a comparison on the show didnt they? of course they did and Bunnings had the best price didnt they... and so they buy from Bunnings without even considering the others... great marketing and advertising strategy!

But back to the thing... I actually believe Bunnings serves a purpose! I do... it gives work to those without a clue about DIY (or much else) ...it supplies a growing niche market of dumb DIY (please read uninformed or biased informed misguided or whatever dont read it as an insult) and it means that for serious woodworkers or those who prefer to pay through the no... err pay a fair price for better quality it keeps them in the big box and out of our hair!! :q

This post is in no way an attempt to slur insult denigrate or cause undue stress or hardship upon anyone who actually likes Bunnings works for Bunnings or whatever... it is just my simple opinion based upon my own experiences... and I do on occasion wander in with nothing and cruise out with some cheep Chingalese Tiawanese or Indian crap... but then I KNOW its crap and have NO delusions about its quality or durability.

The head guys who run Bunnings are not stupid, they cater to the majority and not the minority. If there was a great demand for the more expensive tools and they sold quickly then of course Bunnigs would continue to stock them but in business it is not profitable to have an item sitting on your shelf for months and not.sold.

There is something wrong with this argument but I can"t quite put my finger on it. Bunnings always had a mix of cheap and better gear, but the point was there used to be a choice available. Now when I walk into Bunnings it"s feeling more and more like I"m walking in to a 2dollar shop without the expectation that a better quality alternate will also be available on the shelves.

I think the guys who are running Bunnings are changing their business strategy, as they are entitled to do, however doing it so soon after having cleaned the main opposition off the market is what I find disquieting.

I understand the arguments that carrying slower moving stock on the shelves is an overhead, however with things like sandpaper I find the cost overhead argument a bit spurious. I"ve bought my share of single use ozito"s (and had them replaced without question when they broke, what about that overhead?) but I"d happily pay the premium for decent sandpaper and other consumables every time, and I don"t think I"m alone, so why is Bunnings going down market there?

So, it is all too easy to criticise Bunnings, and I do at times, but at the end of the day they are fulfilling a demand. Most of the time I can walk in to a Bunnings store and walk out with all the items on my list, try and do the same thing in the smaller stores and you may have to visit 3 or 4 and still not have everything. On top of that Bendigo doesn"t have 3 or 4 alternatives! The only other alternative is Home Hardware, quite good, and Mitre 10, totally useless - doesn"t even stock the items in the latest brochure!

We should also not forget that Bunnings et al are not aiming at the majority of people that frequent this forum, they are aiming at the mass market DIY people that just want to hang a shelf, paint a room etc. They serve that market very well, much better than any other company has ever done. It will be interesting to see what Wesfarmers does with Coles, can only improve their market share I think.

I guess we will see in time. I won"t be surprised when the Bunnings paint section starts to look more like a Bristol paint store with the home brands out front and what"s left of the name brands in the far corner.

I"ve noticed the dumbing down as well. Such basics - I bought a Spear and Jackson backsaw from Bunnings a few months ago, and am pretty happy with it, so earlier in the month I figured I"d go and buy a crosscut handsaw to match it. No more Spear and Jackson, plenty of Trojan (and how"s that for a name?).

I was at Bunnings Canberra this morning it has a big car park and I had to drive around and wait 5 minutes to get a spot. How they keep the stock up to a huge amount of buyers I don"t know.

I thought of merbau but the sizes they had didn"t suit. Then swmbo said what about all your new gear, get some 100 X 75 mm sawn clear oregon and rip it to 10mm thick put it thru the thicknesser bingo 75 mm X 9mm and save money. Good idea, the queues were 100 deep, well at least 20 so I left without buying. I will try the local timber yard on Monday. I agree with the rest of the comments about the tools, I sold my Triton gear to a chap in Canberra and he said that Bunnings now have the WK2000 bench with winder and wheels for $450 even at that price I think they would make money for all said and done they are pressed steel and set up the jig and they pop out like sausages.

I was at Bunnings Canberra this morning it has a big car park and I had to drive around and wait 5 minutes to get a spot. How they keep the stock up to a huge amount of buyers I don"t know.

As to the rest... I agree Bunnings targets its audience very well... and I also happily own a Ozito sliding compound saw nice bit of gear other than the blade needs some tightening but thats a mere bagatell... it works does the job its intended to do and if it stuffs it then I chuck it no probs... I think what gets me most is the amount of gear that is crap thats being flogged by people who DONT have a bloody clue as great gear and better than (insert high end name brand)

I enjoy wandering around Bunnings... dont mind it at all really... just be aware that somethings are not what they say they are and some people who work there really HONESTLY dont have a damned clue about what theyre flogging... if some DIY person (of which I admit Im one) does at least a minimum of research and checking prices out they will find that Bunnings really isnt the best of places to purchase tools from... let alone paying a premium for that item.

I have also a lot of misgivings about the demise of the local hardware to the big chains... and unlike others I DONT think its a good thing or a better thing... in fact I think its a bloody bad thing all round... but hey they do hire a bunch of people who probably otherwise would be getting the dole or doing something equally useful and they do have a HECK OF A LOT OF GEAR!!... just a shame a lot of it is crap and its a shame a lot of the staff dont have a clue... but hey its all about the buck so good on Bunnings! :roll:

Bunnings is a home reno/hardware/furnishing/garden supermarket catering mainly for the DIY person. It is not really catering for tradesman or the serious hobbyist.

If you want quality tools and supplies go to the specialist suppliers and pay the going rate, instead of dropping down to Bunnings and be surprised that they don"t stock what you want.

This has been discussed many times before, and it should be recognised that Bunnings are excellent at recognising their market and establishing their competitive advantage based on carrying a large range of products at a very competitive price.

If you keep an "eye out" on TV you will notice that two of the smaller franchise hardware retailers have recognised the growing discontent of consumers towards the services and products offered by Bunnings. Both Mitre 10 and Home hardware are advertising that their point of difference is:

My position is that if you are unhappy with Bunnings then do as I do, don"t shop there - support your local hardware stores and timber suppliers which offer you quality, advice and service (who cares if your 90 degree bend pvc joint costs 50 cents extra).

Bunnings is a home reno/hardware/furnishing/garden supermarket catering mainly for the DIY person. It is not really catering for tradesman or the serious hobbyist.

If you want quality tools and supplies go to the specialist suppliers and pay the going rate, instead of dropping down to Bunnings and be surprised that they don"t stock what you want.

Excellent summary, thank you. The last sentence is a bit ambiguous, though. Are you saying that sometimes Bunnings stocks good gear like Triton, or that Triton is only DIY quality as you should expect from Bunnings?:D

Now, I understand from this thread (and others) that a few of you harbour a strong distaste for Bunnings...Well, I"m not one of them. So, bring on the vouchers.

Thing is does anyone think these types of threads are read or taken notice of by Bunnings staff or management? I think we can comfortably say that theres a few Bunnings employees here among us but what about management? and if they did read these threads would it influence the methods they use? No it wont why cause Bunnings DOESNT GIVE A CRAP about you me the bods that walk through the damned door each day just the money thats left in the till is the ONLY thing Bunnings is interested in... AND THAT is why the staff AND the merchandise are dumbing down!! no other reason.

We all use Bunnings we all go in there and yes we would all accept HAPPILY a Bunnings voucher... but what else can we do other than protest here and to the damned store manager who from my experience gives even less of a crap about what ANYONE has to say than he does to anything other than the bottom dollar.

We all use Bunnings we all go in there and yes we would all accept HAPPILY a Bunnings voucher... but what else can we do other than protest here and to the damned store manager ....

Mitre 10 tried to take on the might of Bunnings with their super sized stores that were essentially a copy of bunnings.There is one on the north side of Maroondah highway in croydon...or should I say there used to be. It was a purpose built store, and after only around two years trading, it has closed down.

Same with Bunnings, they are only responding to the buying publics spending patterns, which is, "Only spend the barest minimum needed to get the job done". So, on the strength of that, it"s only neccessary to display the stock that"s quickly marching out the door.

The other good thing about the special orders department is that they are still able to offer the normal "beat the competitors price by ten percent deal" So, if you see a kick-butt DeWalt Compound Mitre Saw for say $1485 at another store, you should be able to pick it up for $1336.50 at Bunnings. To my way of thinking nearly $150 bucks saved is not to be laughed at, chaffed at, or poked s**t at.

About the only Mitre 10 stores that I know of that do well are the Costa"s Mitre 10 stores (Hoppers Crossing, Geelong and Campbellfield). Ver professional outfits with good staff and good stock. Better than Bunnings IMHO.

Actually that was in Ringwood. Been there a few times and each time their prices were more than Bunnings, even after allowing for the 10% price match.

This typifies the essence of my original post. Bunnings now is not what it was when it took on the mantle of being the Australian HomeDepot. One can applaud their initiative and success, but as times change one is also allowed to lament the demise of what went before. Bunnings will evolve into something it wasn"t when it ran Campbells and HardwareHouse et al out of town and that"s progress. Hell will freeze over before Stanley makes type 11 castings again and that"s progress to. And hell will probably be a whole lot colder before your average tradesman or weekend warrior will care to replace an electric tool kit with hand tools.

It was interesting doing comparisons when our local Bunnings originally opened. I found most small lines were cheaper at the BigW next door but gradually as both the Bunnings and the BigW got more successful the BigW hardware range shrank and the Bunnings prices became cheaper. It was market forces sorting things out and I guess there is an MBA in it somewhere (or maybe a CEO position).

Now while HardwareHouse and Bunnings used to clearly have a sizeable trade business back then, to my eye there doesn"t seem to be as much of trade business happening at Bunnings these days . It must be saving some small and medium sized businesses somewhere. Perhaps we should be thankful.

(edit: My only remaining doubt is that Bunnings couldn"t have got to where it is now, without going through the phase of offering better quality stuff)

I thin we have only just reached this point and I suspect that the trade has not yet sufficiently patronised the replacement for the trade sections of Bunnings/HardwareHouse for them to be viable in their own right. I wonder if it goes/will go to Mitre 10/Home Hardware or to Blackwoods and similar? But there is no doubt that there is a role there and perhaps we just need a little boom in the housing market to get it going so that it will work for us too!

There is a new Bunnings under construction at the moment in Hawthorn, and I believe it is going to be a new model for them. I understand that they are going to be offering white goods and possibly other electrical goods as well as hardware. That will be more like the model that Home Depot and Lowes use in the states.

As for the stores themselves, come on...the few I know have reasonable stock of building materials for the small job tradesman, DIY and weekend warrior. Need cheep framing material, platerborads Villabord, nails, glue, screws, bolts, cheap doors, basic locks and fittings, a trow away handsaw, a sledge hammer a piece of pine board etc go to Bunnings.

You don"t go to Bunnings to buy tools if you are after top quality, and you don"t go there to buy seasoned furniture wood nor turning chisels or compass planes.

I was after a coil nail gun and found a Bostitch coil nailer for $600, yet I can buy it for $450 at a specialised tool shop like Total Tools. I ended up buying the last NV65 Hitachi that retails for $820 for $499 at a specialist tool shop http://www.unitedtools.com.au/ that moved locations and had a promotion supported by Hitatchi. Funny thing is that I needed some coils in a rush so rang Bunnings who told me over the phone they had them yet they only carry duo fast coils yet sell Bostitch guns...go figure!

Furthermore I enjoy my trips to Bunnings a lot. I particularly like to observe staff on the weekends who have mastered the art of looking the other side when they see someone approaching and looking them in the face as to ask a question...I find it truly amusing.

They moved the store about four years ago from it"s original site where they owned the premises and rented the premises out to The Warehouse because they reckoned they could make more money renting it out than they could selling hardware. They saw the writing on the wall when Bunnings took over BBC Hardware about four to five years ago.

Bunnings are a fact of life and will always market to the general public. I certainly frequent their store because it is convenient and they do have just about everything that I need and always have plenty of stock. Ihave bought GMC & Ozitso tools because they are cheap and for the use I will give them they will last the length of the warranty.

Bunnings and any other business organization changes according to what their research shows the profit is. The original thread stated that Bunnings was "dumbing down" their stock as if high quality power tools are somehow intelligent and Ozito or GMC are stupid. No such thing, the masses do not buy the high end of the market and so there is more profit at the lower end. In fact this is good, since it allows the specialized tool shop to survive. Bad service is a fact of life in Australia, or put it in another way, no one in Australia is prepared to pay for good service so we don"t get it.

Some of the answers include Mitre 10 in the good service high quality hardware. I don"t know how it is in your corner of the woods but if you come to Sydney, Mitre 10 is 10 times worst than Bunnings in quality. They are close to what Big W, Woolies and Go low carry in their so called hardware sections. In fact Mitre 10 compared to Bunnings is like a small Franklin compared to David Jones.

If Bunnings carried all the good brands and had an army of tradesman/women to service customers with high quality service, it would carry a much higher cost and when perhaps would gain back some of the trade people, it would loose the weekend warrior who buys cheap stuff to make a fly screen and would overall make less profits yet we would all be very happy. And...I dare say many of us would turn to Mitre10 or Go Low to buy junk when we need junk.

Blackwoods certainly are still there but would consider them to be a specialist engineers supplier and not even in the same class as Bunnings in the type of stock that they carry.

We also have the likes of Gasweld, Avro Distributors, Bearquip and Bearfast which carry high end types of tools and equipment that you wouldn"t ever get in Bunnings and Bunnings would never be able to force these places into liquidation.

These types of businesses mainly cater for the various trades that aren"t interested in buying the low end stuff at Bunnings although they all do frequent the place for what they want at home but not for what they want at work.

BTW Bunnings are looking for land to build a bigger and better store in Tamworth. They did have a piece of land but the backward council knocked it back because they thought it would create traffic chaos. It was out near the new equine centre they are building and that will create traffic chaos anyway.

Some time ago, someone smart said .."buyer beware"...well, here is some sound advice .....when shopping at bunnings, or elsewhere for that matter, bunnings is mainly picked on because its a large store , but believe me, there are plenty of other shonky stores around too ....keep the receipt, if the purchase does not meet the standard you were aware of when you bought it ...take it back....not only is it your right as a consumer ....but the manufacturers will eventually get sick and tired of "replacing" dud stock they will do one of two things ....1. fix the problem and put more effort into what they sell.....or ...2.make a real short warranty period on the item and clearly state "no returns"....thus making the consumer aware that the power drill for $15 for example ...with a three month warranty ....is a piece of ##$%...and if you buy it .....it probably serves for "novelty purposes only"....and not intended for the grunt you plan on using it for ....

GUess what I saw in the new bunnings the other day... That"s right; quality tools! They were selling Dewalt stuff as well as makita.........and ozito.

I"ve got to say that I haven"t had bad customer service at Bunnings. Sure, they aren"t experts in the tools or products - I don"t really expect that for a hardware supermarket - but they are always very helpful and will try to point me in the right direction.

The fact that the good tools are diminishing bites because Bunnings are convenient and SWMBO likes to go along at the same time and look at the plants. Other half decent power tool stores are a bit more of a trek and there"s no way I"d be able to rope SWMBO into coming along.

I"m not making any value statements - I shop at Bunnings for tools and supplies, then again I buy some tools from specialty shops like Fisher Discounts (luvly place!) and also from Clints (Warehouse, whatever). But Bunnings is changing - one way or another. I did a research project on Bunnings a few years back - one of their assets was that they hired former tradesmen, so you got expert advice on your purchase and your project. This was a readily advertised feature of Bunnings, and went a fair way to their successful takeover of BBC and the rest. Evolution in action?

Tools are simply a turnover problem - Bunnings dont sell enough of the more expensive ones so dont hold stock, as their are 2many other tool stores around that turnover plenty and so are getting good enough prices. i have seen quite a few deals lately where retailers are selling a tool, below cost - obviosuly with a deal from the distributor, and Bunnies gets caught with this with price matching - so better to not have the stock.

I agree that it can be annoying sometimes at Bunnings with staff who don"t know whats what or you have to wait in a long line while staff man the door to welcome people but I have got lots of real bargains from Bunnings.

Because Bunnings is so big its not a big deal for them to sell at a loss if they have sold so many of a product they are way in front but it sure is good for us if you can get something at a great price.

If you guys like wood work or just fixing things or anything related to the possible use of hardware you have a DUTY not to purchase anything from Bunnings. They are a disease in the industry.

I"ve stopped going to Bunnings....these days the only quality youll find is at the sausage stall outside the front door. I imagine eventually even the stall will start serving up Chinese made plastic sausages coated with lead paint

Still.....as long as people who dont look beyond the price of a product keep flocking to Bunnings Stores, Wesfarmers will keep making a killing and Ill hang onto my Wesfarmers shares.

I wouldn"t touch JH with a barge pole purely because of the company"s complete disregard for the health of their past employees. Wesfarmers is a bit different however. Bunnings caters for people who put price before quality of the product....like it or not a majority of Australians shop this way. Those of us who know our tools and want something that will outlast it"s warranty period generally shop elsewhere.

As for Bunnings - who I haven"t visited in quite a while, maybe 3 years - at least they keep the locals here on the Vic-NSW border looking over their shoulders.

Still.....as long as people who dont look beyond the price of a product keep flocking to Bunnings Stores, Wesfarmers will keep making a killing and Ill hang onto my Wesfarmers shares.

I respectfully suggest that this thread is not really about woodworking (as many have pointed out, Bunnings sell flowers and manure also :D) but about the economy and our way to deal with it as a society. Maybe we should move the discussion to a thread about APEC and its relevance .:)

BTW, Bunnings didnt start the chinese tool wars - China did, and GMC and others. remember when Makita would give you a 90 day warranty, and GMC came out with a 2 yr warranty - cant see how a bit of healthy competition can possibly be bad for consumers. this can be seen with branded tools now, coming down in price at a rapid rate of knots - competition is good - cosy profit gauging is bad.

Perhaps we must remind ourselves that tools, like any other merchandise are the result of a market and that the market is created by offer and demand. "Good" Australian made or US made or European made or Japanese made as opposed to "bad" Chinese made is a strange view of things. Manufacturers produce quality only if they have a market for it and produce junk when they have a demand for it. To think in Makita as an inspiring good grandpa who delights in producing quality and in Ozito as a devious Chinese who desires only evil and destruction is real funny, and so is thinking in a "bad" Bunnings and "good" Gasweld, Total Tools, Glenford tools or whoever you classify as "good".

Buy what you need, when you need it, from who is offering it and forget all those sentimentalism of the good old days. There is a market for high quality and you have access to it despite Bunnings. There is a growing market for middle of the road and low quality, there is ample access to it and this should not offend you. After all what do you care what others buy? Are you also offended by Daewoo cars?

OK I am off to Bunnings to buy some battenscrews made in China. I will buy a couple extra in case one brakes.:B....Oops! I just noticed that my wok is from Ikea :2tsup:

The difference between the way people live and work in Europe as oppsosed to America is vast. Yet "globalisation" suggests that the American/Chinese model is the correct one to follow. I do not believe this.

Bunnings is what is known as a "category buster". This is essentially a store that runs everyone else out of town and then has a near enough monopoly within their chosen market. Some may think that laudable as prices drop, but therein lays the problem. They achieve their aim then find that they cannot lift their net earnings due to the limitation of the local market. Their choices are to broaden that market or lower their internal overheads, at that point the customer starts to suffer and they are most probably at that point now.

Every time we go into Bunnings and take advantage of their offer to shoot another retailer via the 10% offer we effectively are cutting our own throat in regards to future viable shopping options. Now some may see this as a valid method of marketing and some may not, it is your choice, but be aware of what is happening and what you are doing.

I wonder how long it will be before Bunnings goes online in a big way and using the savings there, starts to go upmarket offering stuff they can"t do within their retail network due to overheads. This will have two effects, they will do the same thing as they have done in the retail street sector and they will blow every other online retailer out of the market and some will say we are better off. We live in the world we create, it is our choice entirely.

Peter, this is not hijacking the trend. From the very beginning (post 2) it was clear that the reasons why Bunnings or other big retailers choose a certain product range are dictated by marketing strategies of a global nature, not just by local shop choices. As I already said at post 77, though, we all know that this thread has nothing to do with woodwork specifically, it just stays here obviously because there is a wide audience and we are all touched by these issues in one way or another.

Discussions on what the Media feeds us by way of alledged news and discussions on global warming has no relevance as to Bunnings chosing or changing their product range or marketing strategies, unless it can be shown that those things has influenced them.

Bunnings moved into town across the road from another hardware store. The manager of the new Bunnings walked into the hardware store and announced to all and sundry that if they wanted a job to come over the road as in six months time they wouldn"t have one, their employer would be closed. There is no sentiment there!

Bunnings is successful for the same reason Cheap as Chips is a raging success. People these days shop purely based on price...quality of the product is irrelevant. Its not Bunnings that have dumbed down...its the general public who have dumbed down.

Bunnings is a business... its in the business of making money and it does it famously... but we are the customers IF we the customers who spend the money that Bunnings makes were to stand up and bloody well say something show them the shyte attitudes of staff the crap stuff theyre selling etc change would have a hope of happening... but we dont as a rule we dont want to cause a ruckus or make a noise

Am I dumb because I bought some clothes from Kmart that are made in China rather than buying hand-stitched clothes made in Aus, US, or Western Europe?

Hats off to the people who call GMC-buyers and Bunnings shoppers dumb. I am amazed at the fact that you don"t buy clothes, cars, bikes, homewares or anything else made somewhere other than Aus, North America, Western Europe or Japan. I applaud you for never shopping at the supermarket, but instead buying all your food from the local farmer. I wish I too had enough money to do so.

Am I dumb because I bought some clothes from Kmart that are made in China rather than buying hand-stitched clothes made in Aus, US, or Western Europe?

Now were getting there!! Now Ive gone back over the thread from the first post to here... and you know what I found? Nowhere did anyone say "Jonathon is dumb yeah him an all his mates are just plain dumb" nope no one said that... so what I guess we could say NOW is that because Jonathon (thats you) has taken the generalizations used by some targetted at Bunnings and somehow extrapolated to mean Jonathon and his mates which I must have missed somehow :doh:

Now now Jonathon... settle down mate no ones puttin on airs an graces here mate were just discussin the situashun thats all... heck if you or anyone else wants to buy tools and other stuff from Bunnings time and again you go for it!!... your money your time... But... and you knew there would come a but didnt you?... BUT! When those cheep chingalese or tiawanese router bits suddenly sheer of as your coving a peice of wood the damned peice of INCREADIBLY FAST MOVING metal whizzes (hopefully) past your head missing your kids on its way to the neighbors 3 houses down the street when the cheep shyte metal blade you put in your circular saw suddenly cracks and breaks sending INCREADIBLY FAST MOVING metal past your groin and slamming into the wall of the shed behind you... THEN MAYBE YOU WILL STOP BEING DUMB and buy good quality machinery and the parts for them.

Its always said here and Im often one of those saying it... buy what you can afford and upgrade as you can afford... and its good advice and by gawd I stand by that!! If the best that you can afford at this time is something from Bunnings then so be it buy it and get into it!... But as your finances allow UPGRADE with better quality.

Ahem now weve had that wee yarn Jonno ol mate... what I said about the blades and bits? Its true... seriously scared the living shyte out of me when the router bit missed my head by a ticks phart a thin run of blood down the forehead and on the forearm half a dozen laps of the shed and a large bang and embedded in the back wall... THANK GOD IT DIDNT HIT ME!!... the blade was a 10in bought in Bunnings cause I was in a hurry and didnt have a spare... sheered of halfway through a rip of a length of HARD Jarrah... not a good feeling seeing a sudden shaft of light in the side wall of the shed at sons head level... Sure Ive said I go there and graze and I also generally walk out with some crap or other but NEVER sharp stuff for machines... twice bitten means I will NEVER go there again... first I like breathing life is good second I love my son and that was just way to close.

So go for it... theres many others that spend hours shopping and grazing in Bunnings here some admit it some dont... theres also some who work there again some admit it some dont... whatever! Just be aware and be BLOODY CAREFULL when you do buy something... especially sharp whirrling blade type somethings :roll:

We have what was originally a Hardware house which became Bunnings. Not long after a Mitre 10 mega store and then a Magnet Mart opens next to each other 1 km from Bunnings.

Seeing the fall off a lot of the staff try to go back to Bunnings to get their old jobs but Bunnings have hired new staff and a lot of them have now had to go and find other jobs.

Neally all the stock in the two other stores is more expensive ( forget the tools ) just the normal things taps and tap washers, power points virtually everything. I went in 2 weeks ago to Magnet Mart as it was close to where I was working to get a tap for a toilet cistern only had one size the wrong thread dia to the one I wanted so its over to Bunnings where both were in stock

For what ever reason people like Bunnings better, obviously price has something to do with it but I thinks its also stock, the Mitre 10 didn"t have any 100mm plastic pipe in stock largest is 90mm so I find it a fruitless exercise going to either of the two.

I hope I"m not hijacking the thread here but as an extra, I just went to our local tip. A young guy was throwing out a pair of the Bunnings $35 folding saw horses they have. I"m sure you all know them, he bought them to do a bit of DIY and as he had finished the job was dumping them. Also the wife noticed the number of things such as baby prams/strollers and push bikes plus just about everything else which were more than usuable if not next to brand new also dumped. It seems the younger generation has no quarms about getting rid of aything regardless of its price if they no longer need it.

Maybe Bunnings has noticed this trend and what we are seeing is the way modern youth do things. Buy whatever, use it for the job then toss it. No point in buying an expensive brand just buy cheap, it will probably do the job if not the guarantee will get you out of trouble, finished with it dump it.

wire rope bunnings made in china

Hot-dip galvanized steel wire rope is a market trend and will become the first choice for users of galvanized steel wire rope. Because hot-dip galvanized steel wire rope has a super high cost performance. The steel wire of the hot-dip galvanized steel wire rope forms a coating by physical thermal diffusion. First, an...

In dynamic systems, steel wire ropes are widely used in the lifting of cranes and elevators, the transmission of mechanical power, the control of automobile cockpit levers, the operation of aircraft control systems, etc. Steel wire ropes are also widely used in various industries such as the design of new railings....

7 x 7- Excellent abrasion resistance 7 x 19- Great fatigue resistance 19 x 7- Good resistance to rotation 8x19S IWRC- Flexible eight strand Rotation Resistant steel wire rope 6x36WS- Excellent resistance to crushing and abrasion, Superior bending fatigue life We produce stainless steel wire rope per customer design...

Company Show Jiangsu Yasheng Metal Products Co.,Ltd was established in 1996,located in the Chinese well-known township of stainless steel-Dainan town.The company is one of the largest manufacturers and exporters for stainless steel wire ropes and riggings in China.We can produce AISI304 and AISI316 stainless steel...

We produce stainless steel wire rope since 1996. Cross Laid Wire Rope When the ropes have to bend a lot around the drum or pulley, fatigued from primary and secondary bending, wires are easy to fail (break) due to fatigue and shear. P

wire rope bunnings made in china

You Might Also Be Interested In