wire rope crane hoist quotation

The Spacemaster® SXs’ unique hoist features include new low maintenance, sealed brakes, a two-speed hoist motor, and trolley inverter control. The standard hoist nameplate will carry a CSA c/us rating as well as a NEMA 3R rating for electrical enclosures. Two-component epoxy paint is standard. Spacemaster® SX hoists are designed to meet and exceed either …

The Spacemaster® EX electric wire rope hoist is the hazardous location version of the industry leading Spacemaster® SX hoist. An innovative design that includes a large drum diameter gives the Spacemaster® EX hoists the lowest headrooms and best wheel loads in the industry, while providing near true vertical lift with single reeving, as well as exceptional hook approaches …

Shaw-Box 800 Series Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill.

Shaw-Box 700 Series Electric Wire Rope Hoists are designed and manufactured for heavy duty service. This workhorse is built to deliver, day-in and day-out, under tough operating conditions. 700 Series hoists are built to take even the most demanding job cycles in stride, yet can be relied upon to handle your most delicate loads with …

Coffing WR Wire Rope Models incorporate high performance engineering with additional advantages of wire rope. The Coffing WR models feature: a mechanical load brake; motor brake; and overload protection as standard.

Wright® Work-Rated® Hoists offer options for hazardous locations, spark resistant and explosion resistant hoists. To receive a quote, call your ACCO Material Handling Solutions Representative today.

Hoists are one of the most essential components within an overhead crane system. After all, hoists are the devices that perform the lifting and lowering of a load. Allied Crane offers a variety of pneumatic, electric, and manual hoists to best suit the needs of your application. Whether you’re looking for a high-performance wire rope hoist or a standard chain hoist, we can assist you with finding the right hoist for every job.

When your facility needs crane and hoist equipment, the process can seem overwhelming. What exactly do you need? How much will it cost and how do you get a quote? And once you figure out what you need, how do you find a vendor that can follow through with the expertise, skill, equipment, and customer service to get everything up and running smoothly?

What type of equipment are you looking for? Brehob sells, installs, and services overhead cranes, jib cranes, gantry cranes, electric and wire rope hoists, and parts and accessories. We also do custom fabrication and installation to meet your unique needs.

With the right information, we can make sure you get a high quality product that will fulfill your requirements, without costing more than it should. At Brehob, we’re proud to offer high quality products from the industry’s best manufacturers, including Columbus McKinnon, Harrington, Gorbel, and Coffing (view our line card here)—and we can also completely design, fabricate, and install customized structural cranes and lifting fixtures to fit your exact requirements right here in our Indianapolis, IN shop. If you need something picked up a certain way for your production, give us a call and we can build a custom solution to meet your needs. (See an example of our custom work with a 100ft bridge crane here).

Electrolift is the oldest manufacturer of wire rope worm driven hoists in the world, highly innovative and a step ahead of the competition since the company was founded in 1932. Engineered and manufactured to be tough and reliable, today the product line has grown to Single Hook, Twin Hook, Base Mounted and Specialized Hoists that meet every type of application requirement. Customers who demand the very best receive a manufacturing integrity that begins with tried and true reliable designs and ends with installations that operate for decades with minimal maintenance, virtually eliminating downtime.

When getting into a higher capacity, electric wire rope hoists are your best bet. They are ideal for very fast lifting speeds, true vertical lift applications, and high cycle (H5 Duty rating) applications. Tri-State Overhead Crane offers 10 Ton, 20 Ton, 30 Ton, and 50 Ton Electric Wire Rope Hoists available from the top wire rope hoist manufacturers.

R&M Materials Handling has over 85 years of experience in the overhead manual, electric chain hoists and wire rope hoists history. Headquartered in Springfield, OH, R&M has parts and service centers located throughout North America, Central America, and South America.

Tri-State Overhead Crane is a highly trusted Yale wire rope hoist distributor and Yale hoist parts. Yale is well-known for their market-leading technology that goes into their YK, Cable King and LodeKing as well as their high safety and performance ratings.

Products under the Shaw-Box brand feature capacities ranging from a 1/2 ton wire rope hoist to a 100 ton capacity trolley/hoist. Whether the job calls for electric or air-power, indoor or outdoor duty, general or severe industrial service, a Shaw-Box hoist meets the needs of the workforce.

Harrington Hoists is recognized as an innovator and market leader in the hoist and crane industry. Harrington Hoists manufactures revolutionary manual, electric, and air chain hoists, wire rope hoists and crane products. TSOC carries a full line of Harrington Hoist world class products including the NER, NERP and SNER electric chain hoists with capacities of 1/8 Ton to 5 Ton.

Demag offers a complete line of cranes and handling technology, focusing on the benefits to their customers and providing high levels of safety, reliability and outstanding performance. Demag offers a wide range of electric hoists that include many standard features that are considered optional from other manufacturers.

Detroit hoist has been designing and manufacturing wire rope hoists since 1905. Based in Michigan, Detroit Hoist strives to be the best while delivering products on time and at competitive prices. In-house product research and development enables the company to retain the flexibility of applying standardized designs, simplicity and economies of time-proven serial components for more value and increased reliability.

STAHL Crane Systems" wire rope hoists range in capacity from 1,100 pounds to 175 tons. STAHL wire rope hoists have a compact, sturdy construction which is extremely low-maintenance. Their reliability, power and long service life are above average. The particularly smooth, precise starting and braking characteristics are common to all.

TSOC stocks several brands of electric chain hoists from CM, Coffing, Budgit, Yale, Harrington, and Demag. Typically ranging in capacity from 1/4 Ton to 5 Tons, these electric powered hoists are ideal for manufacturing and industrial facilities.

Hand chain hoists and lever hoists are the two styles of manual chain hoists that TSOC offers. These are perfect for low duty cycle applications. Another feature that makes these a good solutions is their ability to be portable. Capacities typically range from 1/8 Ton to 5 Ton, but we do offer some heavier capacities up to 25 Ton.

True vertical lift is the lack of any lateral hook drift as the hook moves vertically throughout the full range of motion. Single reeved wire rope hoists cause slight lateral movement of the hook, generally around a 1/4 of an inch lateral movement, for every 12 inches of vertical movement. For most jobs, this lateral movement will not cause a problem, but for some applications this movement can be damaging. If true vertical lift is required, a double reeved configuration will be needed. You will often pay a premium for true vertical lift at lower capacities, so it is important to understand if you really need this feature. By nature of their design, chain hoists provide true vertical lift by the nature of their design. Chain hoists for capacities up to 20 tons may be a more economical choice.

TSOC distributes wire rope hoists; serving clients from coast to coast, Canada, Mexico and especially focused in Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

Whenever you are putting a hoist on an electric travelling bridge crane 2-ton or above, you should apply a wire rope hoist unless some circumstance specifically dictates the use of chain.

Whenever you have any application requiring an electric hoist, with capacity of 5-ton or above, use wire rope unless some circumstance dictates chain. One circumstance that might dictate chain would be a requirement for hook mounting. This is not normally available for wire rope.

Use one with a rope guide if the hook block is ever allowed to rest on the floor or some other object causing slack in the cable that might cause the wire rope to jump out of the drum grooves.

Our overhead crane hoist line complies with all of the North American electrical and mechanical regulations and standards for lifting equipment. Our hoists are being actively used for a broad range of applications including but not limited to:​

Munck Cranes is committed to understanding the requirements and challenges of our customers, building insight into your hoisting and material handling requirements so that we can guide these solutions with the proper hoist configuration, capcity, rating, and duty cycle. Our technical sales engineers take pride in this process so that our customers receive the best electric trolley hoist solution that will exceed your expectations now and for years to come.

Below are some of our standard bridge & gantry hoist configurations. If you think that your application may require a low headroom hoist, our team of professionals sales engineers are eager to understand and design a solution for you.

Munck Cranes uses the double girder electric hoist trolley on our standard two-rail overhead cranes as they allow for controlled hook travel. The capacity of this standard trolley hoist line ranges from 5-100 metric tons. For applications that require a capacity over 108 tons; a custom engineered built up hoist will be designed to meet the needs of your lifting application.

The common foot mounted hoist has a basic mounting arrangement so that it can easily be affixed to an existing trolley, a raised platform, or suspended from above. With 5 different hoist drum configurations and multiple reeving configurations, the Munck foot mounted hoist offers a vast array of options for all of your height of lift requirements.

All of our monobox cranes are equipped with the monorail hoist. This series hoist can achieve a remarkable HOL (height of lift) as they have a low headroom design. The image above does not show the electrical panel however the hoist panels can be easily mounted to the trolley in a safe location that is easy to access for routine service work and inspections.

If you are looking for a hoist that has an extremely high height of lift then a twin hoist trolley may be just what you need. This style hoist line can enable true vertical lift and it can also be programmed for individual lifting or dual synchronization lifting. Our hoists are custom engineered to meet all of your material handling and lifting requirements.

Sievert Crane and Hoist is an authorized dealer of ALL the leading hoist manufacturers in the US. In addition to standard hoists we can engineer our hoists for special applications requiring variable frequency drives, spark-resistant features and weatherproofing. We have long term master dealer relationship with the leading hoist manufacturers in the US that gives us the flexibility of selecting the most optimal and reliable hoisting solution for all your lifting needs.

Read on to learn more about the various types of hoists we provide. For more information please call 1-(708) 771-1600 or request a quote today for your next hoist requirement.

Air hoists are designed for applications that require a continuous duty cycle, or infinitely variable control, or when the application is in an explosive environment. They are usually more expensive than electric hoists. The NEC (National Electric Code) for explosion proof control does not apply to air hoists because there is no electricity powering them.

The application may require the air hoist to have spark resistant features such as stainless steel hooks, stainless steel chain, and bronze trolley wheels

Hoist trolleys are used on beams to move the hoist horizontally. They can be operated manually with a push trolley, gear operated with a hand chain, or a motor driven trolley. You can use electricity or air to power motorized trolleys. Beam clamps secure the hoist in a fixed position on an I-beam or WF-beam so that there is an anchor point to attach a hoist. The trolleys and beam clamps are designed to lift the load vertically.

Winches utilize steel wire rope cable. Capstans utilize special cord rope. The winches can be powered by manual cranking, electric power, hydraulic power or battery power. The winches and capstans come with an automatic brake to help hold the loads.

Engineered Material Handling (EMH) sets the standard for wire rope hoists. EMH manufactures its own single and double girder wire rope hoists for standard industrial applications, with standard capacities of from 2 to 50 tons. The EMH wire rope hoist provides a price to performance ratio that compares favorably with the best the industry has to offer.

Standard features include two lifting and trolley speeds, two upper and one lower precision limit switches, overload limit, heavy duty wear resistant rope guide, DC rectified brakes, and lifetime lubricated bearings and gear reducers.

Sheaves facilitate the smooth and safe operation of overhead crane hoists. Damaged sheaves can wear ropes prematurely and cause other dangerous hazards, such as binding wire rope. Konecranes technicians are trained to identify and correct problems with sheaves and other parts of hoisting equipment.

Sheaves carrying ropes which can be momentarily unloaded shall be provided with close-fitting guards or other suitable devices to guide the rope back into the groove when the load is applied again.

The sheaves in the bottom block shall be equipped with close-fitting guards that will prevent ropes from becoming fouled when the block is lying on the ground with ropes loose.

In using hoisting ropes, the crane manufacturer"s recommendation shall be followed. The rated load divided by the number of parts of rope shall not exceed 20 percent of the nominal breaking strength of the rope.

Rope clips attached with U-bolts shall have the U-bolts on the dead or short end of the rope. Spacing and number of all types of clips shall be in accordance with the clip manufacturer"s recommendation. Clips shall be drop-forged steel in all sizes manufactured commercially. When a newly installed rope has been in operation for an hour, all nuts on the clip bolts shall be retightened.

Wherever exposed to temperatures, at which fiber cores would be damaged, rope having an independent wirerope or wire-strand core, or other temperature-damage resistant core shall be used.

Replacement rope shall be the same size, grade, and construction as the original rope furnished by the crane manufacturer, unless otherwise recommended by a wire rope manufacturer due to actual working condition requirements.

Konecranes wire rope inspections can help crane users extend the life of hoist ropes. Ropes, sheaves and other reeving system components are inspected for compliance with crane standards, and to determine if they have flaws that could hinder safe operation. Contact us today to schedule an assessment.

At R&M Materials Handling, we prioritize the safety of our customers and take pride in the reliability and performance of our advanced lifting technology. With over 90 years of experience in the overhead crane, electric chain hoist and wire rope hoist industries, we have the experience to help you improve the flow and productivity of your operations.

As the name suggests Electric Wire Rope Hoist utilizes Electricity to lift heavy workloads which are beyond human capacity. The Phenomenon lift loads by wrapping a cable around a grooved drum and then the load is attached to a hoist by the means of a lifting hook.

Electric Wire Rope Hoist is an invaluable asset for lifting and lowering a high amount of weight and reducing the efforts no matter what its unit is it can payback many times the investment made on it due to its efficiency for lifting purposes.

Electric Wire Rope Hoists are commonly seen at manufacturing units, large-scale factories, and construction sites. It gives workers a helping hand and makes their work hassle-free.

Electric Wire Rope Hoists shortens the Amount of work time for a certain period which takes hours and days to complete. They are simple and easy to use solution which will increase the productivity in your operation.

Electric Wire rope hoist is a fast speed lifting equipment in comparison to Electric Chain hoist. The lifting mechanism of the Electric Wire rope hoist is driven by a motor to complete the lifting action of the wire rope drum.

Electric Wire rope hoists use wire to lift which is wrapped around a grooved drum they move load slightly laterally and not precise or accurate in lifting. Although the lateral movement is negligible.

These hoists are made to carry heavy objects in a variety of conditions like heat, furnaces, and over the burners. These hoists can lift ranging from pounds to tones. But at the same time, it is required to maintain proper safety measures to ensure the safety of the Hoist, load, and the operator.

Electric Wire Rope Hoists are made using strands and wires which assures the spreading of pressure, stress, and weight on the overall length rather than being distributed on a single strand alone which decreases the chances of breaking factor.

Even if one of the strands breaks, there are chances that the lifting work will be completed without any problems. But a professional would suggest not to use the wire rope which has suffered any such issue but still the current operation can be completed irrespective of the broken strand. So always consider the rope material, wire, and strand structure as they go through more wear and tear than they are subjected to.

Electric Wire Rope hoists come with an instruction guide where you will have all the operating information. There are a few checks which are suggested to perform you put Electric Wire Rope hoist into use.

Wire Rope: – 6×37 construction which is a special flexible steel wire rope, having a safety factor of 6 for class-II and 7 for class-II duty cycle is provided on the hoist.

Rope Drum: – Main component is the rope drum which is made of sturdy seamless pipe or fabricated from steel plated and is grooved to take the full lift without over-winding.

Motor: – Motors are enclosed with half-hour rated with high starting torque, which is specially designed and built for hoist duty. The motors are provided with class-F insulation.

Limit Switch: – To avoid over winding of wire rope, limit switches are provided with each hoist, which ensures the highest and lowest position of the load hook.

Controls: – Every hoist is provided with a control panel comprising of Siemens/L&T/Schneider to make the heavy-duty, directed-on line reversing type airbrake connector, transformers, and fuses which helps in preventing an accident.

Wire rope hoist for sale. 0.5 ton -32 ton rope hoist/ wire hoist for sale. Dongqi offers types of wire rope hoists, such as, single/ double speed wire rope host, explosion proof wire rope hoist, metallurgy wire rope hoist, European FEM standard wire rope hoist, etc. Which type of wire rope hoist, do you need?

Electric wire rope hoist is a type of material handling equipment, installed on a single beam crane, linear curve strander beams or it can be used at the hoisting mechanism of double beam crane, gantry crane, overhead crane, linear crane for material handling by industrial and mining enterprises, railways, and warehouses, etc. More information, please check Dongqi wire rope hoist cast study.

Wire rope hoist basics helps you to find out how to select wire rope hoist, how to check the wire rope hoist before use, how to install and maintain your wire rope hoists, etc. As a wire rope hoist manufacturers and suppliers, Dongqi will help you to find the most suitable electric hoist design at cost-effective wire rope hoist price. Contact to get your wire rope hoist now by email to sales@cranesdq.com.

The proprietary series built, rope hoist unit would be selected from our extensive range of units which have a worldwide reputation for reliability, modern design, safety and the very latest Electric Wire Rope hoists manufacturing techniques.

The wire rope drum is mounted in maintenance free bearings located within the rope hoist bearer frame. The drum is accurately machine grooved to accommodate the rope hoisting wire rope in one layer. And is designed to leave a minimum of 3 (three) turns on the drum when maximum lift height is reached.

The wire ropes, as a matter of fact, are flexible and composed of several steel or fiber wire, the quality of which are necessary to be measured. A sample wire rope specifications are of l6×37 or 6 x19, which indicates its number of standard x number of wires per stand. In China, there are a large number of firms, factories and companies which can offer the standard electric wire rope hoist with quality wire ropes.

As a hoist manufacturer and supplier, Dongqi Hoist and Crane offers types of electric hoists for customers, mainly electric chain hoist and electric wire rope hoist, etc. Dongqi electric wire rope hoists offering includes single / double speed hoist, low headroom hoist, explosion proof hoist, safety hoist, etc. The hot electric wire rope hoists are presented for your referencef in the following:

Electric rope hoist is useful for heavy load lifting, and the electric rope hoist is a superior safe and favorable device, which offers the good investment for your business. Many electric rope hoist manufacturers in China provides many advantages for your workshops in terms of material handlings.

The conjoined wire rope hoists is often used for the simultaneous lifting of two hooks with a steel bar welded between the two wire rope hoists, which make the distance of the two hoists and lifting hooks fixed, without the function of power control and transmission.

Shared drum wire rope hoists is two wire rope hoists placed at each side of a hoist drum with two hoist hooks can be used at same time or separately. The Shared drum wire rope hoists with two hooks is for long objects handling with high lifting speed, which is more than 10 m/ m and lifting , which can be customized.

Noted: The two hooks can be used separated but when use the single hook, the other hook has be to lift up to avoid collision and accident. If the distance of two hook is narrow, please pay close attention on hoist operation to avoid twining.

Coaxial wire rope hoists with two hooks is used for long object or loads handling, whichis a new modification of two CD wire rope hosts, which is connected by the same axial to make the simultaneous movement of two hooks.

Linked axial wire rope hoists is used for the simultaneous material handling at dual speeds which is composed of two double speed MD wire rope hoists, connected by the linked axials. The distance of the two hooks is usually around 3000 mm, and widely used for the lifting up and down of small water gates.

A rope hoist is equipment which used for lifting loads from one place to another with the support of drum or lift-wheel having a wire rope around it. The load is connected to rope hoist by means of lifting hook.

Electric wire rope hoistis powered by an electric motor to make the work of lifting heavy goods easily. Moreover, it is quite safe and convenient. About 80% firms using electric wire rope hoist instead of manual rope hoist because of its convenience. . Generally, A perfect standard should like 6*37 or 6*19 this indicates its number of standard*number of wires per stand. Today, we have abundance firms which offer the standard electric wire rope hoists manufacturers in China.These types of rope hoists are beneficial for your business so, spending money on electric wire rope s is the best investment for your business.

The length of each rope hoist wire rope should be noted which will be presented on the installation lay out of the electric rope hoist . Count the number of wire ropes also is an effective way.

The diameter of the wire rope also needs your attention. There will ideally be a crosshead data plate on the top of the car which should show the diameter of the rope. Alternatively that diameter can also be measured with the help of a calliper or micrometre.

Other important factors include the stranding and construction of the wire rope. Stranding in this context considering the number of strands per wire rope and the number of wires per strand. For example if there is an 8 strand wire rope with 19 wires per strand then the wire has a 8 x 19 stranding.

Depending on the application of the electric rope hoist you may want to check the grade or tensile strength of the wire rope. The higher the strength of the wire rope, the higher the grade. High grade ones are often used on high rises. These may also be useful in high speed rope hoisting conditions.

Electric wire rope hoistare composed of a electric motors, Gearboxes, Wire rope drum with wire rope guides, electric panel and large wire wire rope connected to a hook.Electric wire rope hoistsare used to carry large objects weighing between 500 Kgs and 20 tons in various conditions like severe heat while welding, over the burners and furnaces or in acidic atmosphere. Before purchasing and using a wire rope hoist, you must get the requirement clear and place an order accordingly. Often you will need to be instructed and trained in the use of the wire rope hoistby a rope hoist provider or by someone knowledgeable about rope hoist operations.Instructions

Voltage Check: Check to make sure the voltage of the electric wire rope hoist and the motor correspond with the voltage of the power supply you plan to use. Connect the rope hoist to the power supply only if the voltage will support it. Voltage is proportional to the speed of the rope hoist. Even in case of minor difference the speed obtained will be different than mentioned in the manual.

Test buttons:Test your control switches before your electric rope hoist is carrying a load. Test your emergency stop button by pressing it, and making sure thewire rope hoistceases movement. You can release the emergency stop button by turning it to the left as shown over the switch.

Tangling of wire wire rope :Lower the wire rope all the way to make sure your wire rope is not tangled by lowering or lifting it. If the wire rope is tangled, make sure to untangle it.

Test the limit Switches:This is a very important check that need to be done. Test the rope hoist limit switch, pressing the up button all the way. The limit switch should disconnect when the hook reaches the top of the rope hoist. Repeat the test by pressing the down button.

Check Cross Travel Motion:Press the second set of arrows on your control switch to move the craneto the right or to the left. Check the cross travel limit switches working by taking the rope hoist to the extreme of the monorail or the Crane Bridge.

Check the Crane Motion:Press the third set of arrows on your control switch to move the crane horizontally. Check the cross travel limit switches working by taking the crane to the extreme of the gantry rails.

Trial run with the load:Press the down arrow in the first set of arrows on your control switch to lower the crane. When your hook has been attached to yourload, you can press the up arrow to lift the load. Use the second and third sets of arrows to direct the load to its destination.

Special care is required while unreeling the wire rope hoist; in addition to which kinking or dragging the wire rope hoist over a shape edge that can damage it, should be avoided.

Wire rope hoist for sale. 0.5 ton -32 ton rope hoist/ wire hoist for sale. Dongqi offers types of wire rope hoists, such as, single/ double speed wire rope host, explosion proof wire rope hoist, metallurgy wire rope hoist, European FEM standard wire rope hoist, etc. Which type of wire rope hoist, do you need? Contact us to get your custom wire rope hoist.

On our web, we get many wire rope hoist inquiries with daily. In the following, 5 ton wire rope hoist with 12 meters lifting height is required by a customer from Maldives is presented for your reference.

Thank you for the quotation/specifications. Further please be informed that, hoist going to use in our sand barge, which using in the sea. Therefore hoist require to withstand for the marine environment (salty atmosphere). Hence let us confirm the durability of the hoist accordingly.

With the detailed information on the wire rope hoist listed in the letters about the working condition, Dongqi Crane can choose the suitable electric hoist design for the customer ‘s unique working condition, which improves the efficiency of communication and quickens up the quotation process. Based on the information, Dongqi Crane quotes the wire rope hoist with the feature of salty-proof, water-proof and the anti-corrosion and with technical drawing.

In our requirement we no needs the sideways movement of the hoist and will be mounted in the centre of the mounting H beam in the sand barge as show in the attached picture.

Some changes on the specification of wire rope hoist and the photos of the working application have been sent to Dongqi Crane. Every detail about the wire rope hoist specifications and technical requirements has been confirmed, then waited about 2 days we have received our customer’s question:

What is the wire rope hoist weight? Quickly, our engineer estimated the weight and volume to the customer to help him to know more about our products.

Dongqi Crane always put our customer at the first place and try our best to satisfy with their demands. With our quick response, and two days later, the PO has been received. So if you need the overhead crane or electric wire rope hoist, please leave a message below.

2 tonexplosion-proof electric wire rope hoist Thailand. Explosion proof hoist is a type of wire rope hoist with high safety, used in hazardous environment. Check explosion proof wire rope electric wire rope hoist now. Dongqi explosion proof electric wire rope hoist at good price.

16 ton electric wire rope hoist Russia. Dongqi 16 ton electric wire rope hoist with 9 meter lifting height for sale Russia. Dongqi hoist and crane manufacturer offers types of cranes, i.e., overhead crane, gantry crane, jib crane, electric wire rope hoist, winch and other lifting equipment for Russia market.

Dongqi 10 ton wire rope hoist with 10 meters lifting height for sale Egypt. Dongqi Hoist and Crane offers types of cranes, i.e., overhead crane, gantry crane, jib crane and electric wire rope hoist, winch and other lifting equipment for Egypt market.

5 ton Electric wire rope hoist for sale Indonesia. As a wire rope hoist manufacturer and supplier, Dongqi Hoist and Crane offers types of hoists for customers, including single / double speed hoist, low headroom hoist, explosion proof hoist, safety hoist, etc.

45 ton electric wire rope hoist. Dongqi Hoist and Crane offers types of wire rope hoist, single/double speed wire rope hoist, fem wire rope hoist with lifting capacity up to 80 ton. Check the custom made 45 ton wire rope hoist for your reference.

Electric wire rope hoist for sale. Dongqi custom designed 5 ton wire rope hoist with 50 m lifting height for sale Pakistan. Dongqi offer types of wire rope hoists, single / double speed wire rope hoist, and explosion proof wire rope hoist, and metallurgy wire rope hoist, etc. Check custom 5 ton wire rope host project and get your individualized electric wire rope hoist now.

Rope hoist for sale Philippines.Types of customer electric wire rope hoists, electric chain hoist, electric wire rope hoists are for sale in Philippines customers from Chinese wire rope hoist suppliers and manufacturers, Dongqi Hoist and Crane.

5 ton wire rope hoist custom design with 40 meters of lifting height from Dongqi Hoist and Crane, your wire rope hoist manufacturer. Dongqi types of electric wire rope hoists for sale. Contact Dongqi as your wire rope hoists manufacturer and supplier now.

Dongqi offers types of electric wire rope hoists and cranes, such as electric chain hoist, electric wire rope hoist, workstation crane, shop crane, factory crane, and other types of cranes, etc.

Dongqi Crane offers types of overhead cranes, gantry crane, jib crane, workstation crane, shop cranes, electric wire rope hoist, winch and trolley for Hongkong market. The 5 ton single girder overhead crane case is presented for your reference.

In the above, it is some of Dongqi wire rope hoists and crane projects for your reference. If you want to know more about Dongqi"s projects around world,please contact us by email to sales@cranesdq.com.

In order to give you suitable electric hoist solution and specific electric hoist price promptly, please help our electric hoist engineer to confirm the following information as much as possible:

Leave your electric hoist requirement below, and custom electric hoist solution will be offered for free. Email: sales@cranesdq.com. Your custom designed wire rope hosit will solve your lifting problems. Free wire rope hoist consultation will be replied in 24 working hours. Contact to get your wire rope electric hoist now.