wire rope crimping tool screwfix supplier

Crimping tools are used to join two pieces of metal or components by pressing them together to create a crimp or seal. They resemble a traditional pair of pliers, with clamps with a ridge on one side and a notch on the other. A cable crimper is commonly used by electrical engineers to attach connectors to the end of electrical cables. Easily portable, they come in a range of sizes and styles including crimping pliers, modular crimpers and crimping tool sets. They usually have hardened or carbon steel jaws and some are also designed for bending, cutting and stripping cable.

I bought a cheaper crimper online but it was poorly made and the ratchet mech packed in after 5mins. So invested in this crimper hoping for better quality. Definitely feels better made. Crimper works well. Cutter and stripper do not work. Truth is you can’t use a stripper on cat5e cables as you need to make sure no wires are scored. Ironically I am now using both tools. Bad crimper to cut and this tool for the crimping. Used in conjunction with the remote cable tester which I highly recommend. Can’t do this job without it.

I bought this for a one of use to put new terminals on my batteries & starter motor wireing. I really needed one that did 12mm cable. It was difficult to close but with the help of a lump hammer it did the job and survived perfectly intact. The rachet did stick, but as it was being used on a larger size I expected it to . No problem, just push in the rachet lever between the hadles to free it, or remove the teeth (2 screws). Excellent value. Can"t fault

Set containing professional, multifunction crimping tool with slots for crimping red, blue and yellow terminals and cutters for bolts and wire. Includes 120 terminals of varying types coloured red and blue. Supplied in a Teng Tools TC tray with removable hinged click and lock lid. Can be used as part of the Teng Tools TC controls system.

Buy Essentials Crimping Tools at Screwfix.com. Free next day delivery available. The UK’s leading retailer of trade tools and hardware. 60 days free credit available. Pay your way. PayPal accepted online. Apple Pay accepted in store.

Automatic crimping pliers with hex crimping, which can eliminate unnecessary cable and wire-end sleeve waste. With a wide crimping range between 0.08 and 16mm², they conveniently combine 2 crimping pliers in a single tool. The hexagonal crimping prevents small wire-end sleeves from snagging. The feed also provides process safety by preventing the plastic cover from being crimped. Suitable for empty sleeves up to 16mm² and twin sleeves up to 10mm². Elastic, impact-cushioning plastic handles for comfortable, fatigue-free work. An integrated lever ensures that the crimping process can be stopped manually at any time.

Crimps both 6 and 8-position modular connectors (including RJ11 and RJ45). Cuts and strips CAT3, CAT5e and flat cables. Heavy duty carbon steel body for strength and durability. Precision-engineered crimping ensures secure termination. Compact ergonomic design for convenient storage and easy handling.

Automatic crimping pliers with hex crimping, which can eliminate unnecessary cable and wire-end sleeve waste. With a wide crimping range between 0.08 and 16mm², they conveniently combine 2 crimping pliers in a single tool. The hexagonal crimping prevents small wire-end sleeves from snagging. The feed also provides process safety by preventing the plastic cover from being crimped. Suitable for empty sleeves up to 16mm² and twin sleeves up to 10mm². Elastic, impact-cushioning plastic handles for comfortable, fatigue-free work. An integrated lever ensures that the crimping process can be stopped manually at any time.

Compact, ergonomic design for a natural, single-hand operation and easy storage. Heavy-duty ratchet ensures complete termination. Direct lateral crimp action provides more even, precise contact termination across all pins. All inclusive tool cuts, strips and crimps data and voice cables. Cuts and strips CAT6, CAT5e, CAT3 and flat-satin voice cables. Crimps 6 and 8 position modular connectors (RJ11, RJ12, RJ45). Quick reference connector wiring diagrams provided on the tool and downloadable to a mobile device.

is essential for reliable terminations, and getting the right crimp requires the right tool. While this may sound simple enough, there several important things to keep in mind when selecting from the myriad ofon the market.

The first factor to consider is the volume of your operation. While high-volume operations will generally turn to automatic tooling, such as a hydraulic or pneumatic press, many production lines still utilize hand-crimping.

Standard field-repair quality crimpers are ideal for shops that do lower to medium volumes of crimping and have simpler needs. For shops like this, affordable multi-purpose models with swappable dies, such as thefrom Waytek (crimp tool frame and 7-die set), eliminate the need for multiple hand crimpers.

Other good choices for all-in-one crimping tools include the All-in-One Crimping Tool by Eclipse Tools, the,and the. These relatively inexpensive tools work well for in-the-field use and repairs, can be used in confined spaces, and enable wire cutting and stripping as well as crimping of terminals.

Wire gauge is another top consideration. Crimping tools are sized according to the wire gauge they can accept using American Wire Gauge (AWG). Also important is the type of terminal being crimped because each type of terminal has a specific crimp profile.

Terminals typically come in two main types—open barrel or closed barrel. Closed barrels are the most common type seen in the wire terminal market. They come in insulated and non-insulated varieties, quick connections, and many shapes and sizes. Oval or hexagon stye crimps are typically used for closed terminals.

Open barrel styles, in contrast, provide the best resistance to vibration and corrosion and are commonly used in automotive wire harnesses and high-volume applications. The most common crimp style of an open barrel is an “F” crimp (see chart below).

Most terminal manufacturers specify what type of crimper needs to be used, so be sure to refer to the manufacturer’s technical specifications. If you must comply with UL or other guidelines, it is especially important to adhere to manufacturer crimp tool specifications. A multipurpose crimper will typically not be acceptable.

It is important to check the warranty requirements of your terminal. While many brands will simply list specifications for a crimping tool, some warranties may go so far as to dictate that only their brand of crimper be used with their branded terminal. Failure to abide by these mandates may void your warranty, so it pays to be sure you are following their guidelines.

As you can see, there"s a surprising amount of variety in crimping and a good approach is to have a few sets of crimpers handy to perform different jobs. To get the gear you need for your perfect crimp, view ourand

Peter White lists two tools for crimping connectors onto wires. The price of the Knipex 97 52 14 makes the eyes water. The other one looks overpriced for what it is too.

I like good tools and sometimes pay for them, but these seem overkill for a home mechanic. (Or are they, considering I install lights at least once a year? I prefer not to have them on the bicycle in the summer.)

I bought a proper ratchet crimping tool, and it was £30 or £40 which I thought very reasonable. I think it was either Elliot Lucas or Facom - both excellent brands. I would definitely reccomend the ratchet type over the crappy on. TBH I"d prefer to make to with a mole grip than the crappy type. A lifetime"s supply of fittings in an assorter box was maybe a tenner

Good crimp tools are expensive because they are good. You can make adequate crimp joints using a tool which costs £1 but proper crimp joints (made with a good tool) are better for sure.

I remember once being shown around the RAF apprentice school in Halton in the early 1980s and being introduced to a crimping tool that cost £600 back then.

The argument was that the wiring on a high performance jet was all worked out exactly to minimise weight and that single nick in a wire could produce a hot spot leading to a fire so each crimp had to be perfect and inspected.

I do have some obsolete specific use (ratchet) crimping tools from BT and they are nice examples of quality precision kit, that were probably not cheap.

Screwfix:- https://www.screwfix.com/p/ratchet-crimping-tool-1-0-10mm/96561toolbase have a similar offering. I use CMP5 which can be found for about £20, very nice it is.

CPC have a fantastic range of all manner of tools, electronics, cables, ad infinitum. I"ve used them for about 20+yrs before they became a subsidiary of farnell( it now a subsidiary of avnet access IIRC ). For Samuel D I"d imagine he needs a company that can ship to france which I think CPC/Farnell amongst others definitely do.

Good crimp tools are expensive because they are good. You can make adequate crimp joints using a tool which costs £1 but proper crimp joints (made with a good tool) are better for sure.

You can get soldering irons and solder for less than a fiver from fleabay, these have multiple uses beyond dynamo wiring. soldering wires is not difficult, bit of practise and ensureing joints are clean and prepped correctly is usually sufficient. A useful lifetime skill to be learned.

Re soldering : whilst it is a relatively easy skill, albeit not trivial, it is extremely tricky to solder aluminium to copper - at least I don"t know how to do it, so soldering a wire to a crimp fitting is beyond me.

I reccomend one of those gas soldering irons asnit"s much handier than a leci one. You don"t have the weight of the cable dragging it off the bench and you don"t accidentally solder through the cable. Also comes with a jet for heat shrinking, direct (small) flame and for cutting rope / plastic. An all round great too. Maybe £30

I havent really noticed that many aluminium crimp terminals. I think that all of the ones that I have done have been copper-based, sometimes tinned making them silver. Same for the wires.

profpointy wrote:I bought a proper ratchet crimping tool, and it was £30 or £40 which I thought very reasonable. I think it was either Elliot Lucas or Facom - both excellent brands. I would definitely reccomend the ratchet type over the crappy on. TBH I"d prefer to make to with a mole grip than the crappy type.

There are so many different types of crimps out there that I’m concerned I’ll end up with an incompatible tool. I’m trying to crimp things that look like the “spade connectors” at the right of this image. They have a U-shaped channel into which the wire is laid.

Will this tool suggested by old_windbag work with those connectors? I ask because Screwfix tries to sell me “copper tube lugs” when I add it to my cart.

meic wrote:I havent really noticed that many aluminium crimp terminals. I think that all of the ones that I have done have been copper-based, sometimes tinned making them silver. Same for the wires.

Ratchet is in the handle and prevents the tool being released accidentally until the whole crimp process has been completed. Meaning it is less likely to make a mess of the job. A ratchet tool does not automatically cost 100s, CMP5 is about £20. Now you have a part number you might find a supplier in France.

The Screwfix type will probably be fine, under Q&A it says it works with uninsulated as well as insulated. It has no ratchet. I would prefer a tool specifically for uninsulated so there is no doubt about getting a good joint. Having said that, I spent many years doing the job adequately with pliers and mole grips.

By way of an update I have ordered from Ebay and the seller Handy Straps who seemed to be pretty much best price; 4 Stainless Steel (316 grade) Duplex Wire Rope Clamps and 4 of the Stainless Steel (316 grade) Thimbles ends/heads. I thought it better to spend a little more on the 316 grade steel rather than the cheaper Zinc plated options.

Get industry-standard wire connectors for the job from the wholesale wire crimp head variety at Alibaba.com. Each terminal connector is made of 99.9% pure copper that effectively prevents rust, anti-oxidation, and electrical sparks. After uniform heat, this heat shrink connector with adhesive coated emits hot melt adhesive, instantly shrinks and adheres to the wire"s insulation. This way, you’ll create a completely waterproof and wear-resistant environmental seal. You can use this unit for terminal wiring of professional equipment like batteries, distribution boxes, cables, etc. Browse wire crimp head at Alibaba.com and get your pick today.

The success rate of connecting your wires depends on the standard of your terminal. Not to worry - you can choose your wire terminal or screw terminal from the wire crimp head variety from Alibaba.com for your needs. This wire crimp head is a time saver - all you need is a heat gun to finish the joint, and you’re good to go! Notably, the spade connector follows the universal size and is therefore, versatile to use. Plus, its well-designed high-standard flared opening promotes easy wire insertion that allows easy operation during heavy-duty applications. All these advantages are in the wholesale wire crimp head varieties at Alibaba.com.

Need a speaker terminal? This terminal is designed to fit narrow and confined spaces - can bend after a connection and no need to solder or crimp in the confined area. You simply need to control the temperature through your heat gun. And since each lug has a specification mark, you can quickly find the right terminal and make your connections quicker and easier. This electrical terminal can suit nearly all types of wiring needs, from simple wire splices to heavy-duty vibration applications. Browse wire crimp head at Alibaba.com and choose from the multiple choices today.

A crimping tool joins two components by compressing them, typically electrical cables. They are often found in the toolboxes of electricians, electrical engineers or cable assembly and repair technicians. What Are the Different Types of Crimping Tools?

Several models have wire strippers or cutters built-in, making them multi-purpose tools. While you can get electric, hydraulic and benchtop crimp tools, the most common are manual hand tools. Handheld crimping tools resemble a set of pliers. Some have a ratcheting or semi-ratchet mechanism for crimping copper tube lugs and connectors.

At Toolstation, you’ll find various crimping tools, including wire crimpers, bootlace crimping tools, heavy-duty semi-ratchet crimping tools and multifunctional modular crimping tools. We offer high-quality, affordable hand tools from leading brands such as Minotaur, PRO and Copper.

Our wire balustrade is simply the best on the market, versatile and hard-wearing, delivering you outstanding quality. All wire balustrade and hardware is engineered and manufactured in the UK to highest specifications.

Applications include: interior and exterior decking cables, pergolas, trellising, boundary fencing wires, vineyard wires, wire suspension installations, simply decorative and so much more...

Our DIY wire balustrade kits are designed for quick and easy installation, simply choose from either Flat Surface or Tube Mount fixing. Kits supplied in a choice of 1m, 2m, 3m, 5m, 7.5m, 10m and 12.5m kits ready to cut to size.

Our made to measure wire balustrade is manufactured to your exact dimensions, with pre-swaged end fittings to your balustrade wire, the ideal choice for any bespoke balustrade project, available for Flat Mount or Tube Mount.