wire rope lubricant oil price

Schaeffer’s 199 Silver Streak® Wire Rope Lubricant (40 Lbs) is a robust, heavy-duty lubricant that extends the service life of wire ropes. Silver Streak® Wire Rope is made with high viscosity index paraffin base oils, synthetic base oils and penetrating oils. This unique blend allows Silver Streak® Wire Rope to retain consistency in extreme temperature changes. Silver Streak® Wire Rope rapidly penetrates the inner wire rope core to reduce friction and wear between the wire rope (cable) strands, and the sheaves and drums. Silver Streak® Wire Rope can be used on all types of wire ropes (cables) common to mining, construction, and the marine industry.

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

Companies that recognize the importance of proper wire rope lubrication and adopt best practices gain a huge advantage in the marketplace. For example, they can lengthen wire rope life, eliminate costly replacements, and improve safety. Factors that influence wire rope life and performance include type of operation, care, and environment. Two problems include wear and corrosion.

Stress-loading; shock-loading; heavy, jerking loads; or rapid acceleration or deceleration all contribute to wire rope wear. Similarly, fumes, acids, salt brines, sulfur, gases, salt air, and humidity all contribute to corrosion. Moreover, high temperatures can amplify the effects of these environmental conditions. The right type and quantity of lubricant will protect the wire rope from degradation, regardless of cause.

Key performance attributes to look for in a wire rope lubricant are wear resistance and corrosion prevention. For wear resistance, look for products with anti-wear additives and proven results in the field. For strong corrosion protection in extreme environments, look for wire rope lubricants with salt spray resistance value above 60 hours and humidity cabinet values of more than 60 days. LE lubricants have been designed specifically to meet or exceed a variety of requirements, depending on the application and operating environment. Check with your LE consultant for specific recommendations.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. We recommend a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface.

For maximum core penetration and coating, we advise the use of an automatic lubrication system. Further, this system should include a cleaning component, as cleaning wire rope prior to lubricant application is critical. Contamination buildup acts as an abrasive and accelerates wire rope wear. In addition, the buildup keeps in water and increases the rate of corrosion. Contamination buildup also interferes with visual inspections.

Lubricating wire rope can be difficult. It is frequently done by hand, which is time-consuming and can create a safety hazard. Likewise, it can be messy and create housekeeping challenges. To properly lubricate, it is important the lubricant makes its way to the core of the wire rope, something that is difficult to achieve with hand application.

Eliminate messy, time-consuming hand application with an efficient automatic lubrication system. We recommend the Viper MKII system. With one pass, it injects the perfect amount of lubricant to protect the rope, getting it into the core.

Abrasive wear can occur on the inside and outside of the rope, depending on the operating environment. Abrasive wear usually reduces rope diameter and can result in core failure and internal wire breakage. Therefore, picking the correct heavy-duty industrial wire lubricant is critical to prolonging wire rope life.

Wire rope lubricants have three principal functions. First, they reduce the friction as individual wires move over each other. Second, they provide corrosion protection in the core, inside wires, and exterior surfaces. Third, they prevent abrasive wear.

We formulated a line of penetrating and coating wire rope lubricants to meet the challenges of friction, corrosion, and abrasion. When you properly apply them to wire rope, their outstanding adhesive strength helps them remain on the rope and maintain a strong lubricating film between wires and strands. Additionally, they resist oxidation, water and contaminants, all while remaining pliable in use.

Wire ropes are working pieces of equipment that are normally exposed to air, water and soil. Today, some industries are required to conform to certain environmental standards, such as the EPA VGP for the marine industry. Other industries, including forestry and logging, are seeking to implement their own green initiatives.

LE offers lubricants – including an EAL grease – formulated to minimize environmental impact if accidentally released into soil or aquatic environments.

In conclusion, Lubrication Engineers can help put together a lubrication reliability program for your wire rope applications to help them last longer, subsequently eliminating downtime and reducing maintenance costs.

Bio-E.P.™ Wire Rope Lubricants are ultimately biodegradable vegetable oils formulated with antiwear, extreme pressure (EP), antirust, oxidation inhibitors, and a tackifier. They provide a light waxy-tacky coating, and are recommended for lubricating multi-strand cables and wire rope wound around central cores of steel or fiber, which are subject to heavy loading and/or shock loading. These biobased products provide improved fire resistance over equal viscosity petroleum products and contain no chlorine, zinc, or heavy metals. Performance is enhanced by use of the Stabilized HOBS’s natural vegetable oil composition, which provides an oily boundary film. In addition, this oily film has a natural polarity to metal surfaces and helps clean and then penetrates deep into the inner core of the cable preventing rust and wear. The super high viscosity index of the Stabilized HOBS adds additional lubrication qualities to this high performance lubricant. Laboratory and field tests have shown that the products provide exceptional protection with excellent low temperature pumpability.View More Products

Jet Lube® WLD™ aerosol is highly tenacious, adhesive lubricant containing both molybdenum-disulfide and graphite and is specially formulated for use on wire lines, cable and open roller chains. WLD™ aerosol penetrates the outer strands of wire rope and cable, displacing moisture and permeating to the core of the rope or cable, lubricating and protecting each strand. As the LVP solvent coupled with acetone and the propellant of WLD™ aerosol evaporates quickly while providing as low as feasible VOC content. A thin, flexible film of lubricant is formed. This barrier film prevents the incursion of moisture and dirt between the strands and contains rust and corrosion inhibitors to prevent both abrasive and corrosive wear, significantly prolonging the life of cable and wire rope. The barrier film of WLD™ aerosol protects against the formation of rust and prevents "rust binding", which reduces cable flexibility and life, increasing friction and wear. The barrier also offers protection against corrosion, preventing pitting of wire strands that can cause fatigue failure in the cable or rope. WLD™ aerosol also performs effectively in the presence of high humidity or salt water. WLD™ aerosol resists being thrown and dripping off the cable or rope even at the highest operating speeds. Because it is a "thin film" lubricant, constant replenishment of the lubricant is not required, thus reducing the cost of lubricant application.Does not attract dirt or dust

Prolongs the life of wire rope, sheaves, pulleys, drums, guides, pins and rollers in a variety of applications, including cranes, hoists, marine tow and mooring lines, dockside cables, aerial tramways, dredges, draglines, mining, elevators and many other applications in construction, mining, transportation and manufacturing.

Crosby’s Vitalife®products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope.Available in a variety of container sizes.

Whitmore’s Wire Rope Lubricant products also coat these strands to prevent friction and wear. This results in longer wire rope life, less downtime for rope changes and more production.

Whitmore’s Wire Rope Lubricant is easily pumpable at temperatures down to -25°F (-35°C). Its nondrying film remains flexible in the most extreme weather conditions, which eliminates flaking and peeling.Whitmore’s Wire Rope Lubricant can be used to lubricate all sizes of wire rope, as well as chains, leaf springs and other applications where penetrating oil is needed. It may be applied by hand or automatic lube system.