franks 300 workover rig factory

Franks 300 D.D. powered by a Detroit Series 60 with a HT 750 Allison transmission mounted on a Franks four axle carrier with a Franks 96 ft .. 215,000 lb. capacity derrick. This rig is equipped with an adjustable driller and work platform system up to 17 ft., hydromatic, hydraulic jacks, winch, B.O.P. controls.

Well Service | Workover Rigs - WELL SERVICE RIG - FRANKS 1287-160-DTD-HT D/D Well Service Unit p/b DETROIT 8V-71N Diesel Eng, ALLISON CBT-4460-1 Trans. SERVICE KING 96" 180,000# Hydraulically Raised & ... More Info

Well Service | Workover Rigs - FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96’H 150,000# Tri-Scope Telescopin... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b CAT 3406 Diesel Eng, ALLISON HT-750 Trans, FRANKS 96’H 180,000# 4-Leg Telescoping Mast, Hydraulically Raised & Scoped w/4-Sheave... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102’H 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Db... More Info

Franks Double Drum back-in Wellservice/Workover unit. Lebus Grooved for drill line & sand line w / line type weight indicator, air clutches & controls and McCormick 300,000 lb weight indicator. 10,000′ New sand line.Tongs included, no tools.

Mast:Franks 84’ 4-leg mast, 120,000 lb. Static hook load, hydraulically raised & scoped w/(2) raising rams, (5) sheaves, crown safety platform, and double tubing board, rod board, ladder, guy lines and adjustable working platform.

Carrier: All above mounted Franks tandem axle front, tandem rear carrier, Detroit 8V92 diesel engine w/ electric start, radiator, gauges, hydraulic pump, Allison 5964 6 speed transmission, single man cab, tool boxes, hydraulic reservoir, water tank, air receiver tank, (2) 100 gallon fuel tanks, (2) hydraulic leveling jacks, hydraulic winch, Hercules 118 deadline anchor, folding walkways, safety rails, stairs, 65R22.5 front tires & 12R22.5 rear tires.

Also ask me about my entire supply line of other oil patch equipment, New, Used and Surplus, Mud Systems, Vessels, Casing, Tubing, Swivel Rotary, Rods, Gas Turbines, Steel and Fiberglass Production Tanks, Backhoes, PumpJacks, Rods CNG Compression Packages, Tongs, Swivel Joints, Heavy Equipment, Drilling and Workover Rigs, Construction! Do you have any oilfield equipment that you seek to market? I Get Quality Oilfield New, Used and Surplus Equipment.

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable...

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 ...

Single drum, 10” x 13” pole, 80,000#, mounted on 1993 Mack RD6885 truck, currently in service, rig has plumbing for hydraulic tongs, has winch for raising and scoping out the pole  Price:  $92,500

RIG 123 • Safety and directional signs • Electrical Ground Bonding Equipment • FRANKS 300 EXPLORER Mobile Double Class Stretcher • Crown Saver III (4200m) • 60.3 mm, 73 mm & 88.9 mm pipe rams Rig Inventory • 1 self-retracting life lines

• Franks 300 Explorer Mobile Double Class 3 BOP Equipment• Four axle, self-propelled, double drum, back in rig • Class III• 4200 m x 73 mm tubing • Schaffer 35 Mpa annular and Dreco 35 Mpa• 12.7 liter 60 series Detroit Diesel rated at 425 hp double-gate engine • 166 liter T3 Oilco Model C1044311T3A• Allison CLT-750 five speed transmission accumulator with a pressure rating of 21Mpa,• 30.5cm x 106.5cm main drum with 38.1 cm s/n 4005260 Parkersburg hydro brake • 73 mm x 35 Mpa safety valve• 20.3cm x 106.5cm sand drum • 76.2 mm rod BOP• 31.1 Meters Franks 102-215 mast with a max • 76.2 mm x 6 m swab lubricator c/w tool trap load of 95,600 daN w/ 6 lines • 73 mm gate valve• 4200m x 73mm tubing and 3000 m sucker rods• Ideco 110 ton Shorty trave; blocks• Fluorescent lighting Pump• 1” drilling line• 4000 meters 12.7 mm swedge sand line • 2005 Capital Rig, tandem – tandem homemade• Hydraulic weight indicator rig carrier style• Dual winches • 101.6 mm x 127 mm National JWS-340 triplex with a pressure rating of 35 Mpa

Combination • Detroit Diesel 50 series rated at 350 hp engine • Allison CLT-750 5 speed transmission • 3 x 2 x 13Mission Magnum I charger pump• 9 m x 2.6 m mobile combination building • 7 valve manifold with a pressure rating of 35• 4.4 m x 2.6 m tool house / accumulator portion Mpa• John Deer 60 KW generator• 2006 Sterling Acterra (tandem drive) w/ Cat C7 300 hp engine & Allison 3500RDS transmission Mud Tank

Handling Equipment • 28 M3 mud tank c/w mud guns, mixing hopper and settling trough • 20 - 5.08 cm X 6 m line pipe and suction hose• 58-93R Foster tubing tongs • Poor boy degasser• Cavins TC 101 air slips • External Gauge• BJ, Oil Country elevators• 60.3 mm, 73 mm & 88.9 mm standard tubing sizes• 5/8” and 1” rod sizes• 2 - 8 x 42 and 2 - 6 x 16 rig mats• Catwalk & 3 sets pipe racks

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102’H 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Dbl Tubing & Triple Rod Boards, hydromatic brake, on a FRANKS 4-Axle Carrier w/ Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls & Flotation Front Tires

FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96’H 150,000# Tri-Scope Telescoping Mast, Hydraulically Raised &, Sgl Tubing & Dbl Rod Boards, Adjustable Height Work Platform, Mtd on FRANKS Explorer III 4-Axle Carrier w/Sgl-Man Cab, (2) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls & Flotation Front Tires

IDECO H35 96’ 210,000 MAST, DETROIT 60 SERIES ENGINE, ALLISON 5860 TRANSMISSION, REFURB 2005, IDECO DERRICK REPLACED WITH NATIONAL DERRICK, TUBING DRUM CONVERTED TO A RIGHT HAND LAY.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Built 2012, 42 x 12 drawworks, Cat C15 (475 hp) engine,  112’ x 300,000# derrick, mounted on 5 axle carrier.  Includes skid mounted Gardner Denver PAH mud pump with Detroit 8V92 engine (gear end is good, but needs fluid ends machined or replaced).  Package Price:  $270,000

Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles.  Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside  Price:  $645,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working  Price:  $270,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Manufactured 1980, (2) Cat C13 engines, Allison transmission on 6 axle carrier, 108" x 300,000# mast with mast lights, single 2042 drum drawworks with water cooled brake, 2 hydrraulic winches  Price:  $170,000

Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000" of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50" hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000" wells, all new hydraulics   PRICE:  $137,500

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans.  Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards.  Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires  Price:  $350,000

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Manufactured 1960, Double drum, all air operated, 7/8" drill line, 9/16" sandline, 60" single pole 10 x 13, mounted on Franks 3 axle carrier, will handle 8000" of 2-3/8" tubing or 6000" of 2-7/8" tubing, tools include tongs and handling tools, good condition  Price:  $69,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

WATSON HOPPER GXXTA(Ref#10095Ta) Built 2005, 4 axle back-in rig, GXXTA Double Drum, 10"x42" brakes. 2-hydraulic equalized brakes. Hopper 1 to 1right angle drive. Oil tight chain guards. 30" Hopper air clutches, 4 axle I beam chassis, 51,000" Eaton rear ends, 150 gal fuel tank, Allison transmission. Snow/mud combo tires. Provision for working floor. Three tool boxes, 96" - 3 piece telescoping derrick 140,000#. 12V lights top/bottom, Working ft/tong retractor/tubing board, Chrome main ram and telescoping ram. 24,000# tandem front axle with power steering. 4 hydraulic jacks - long extended. Cat diesel engine. Hydrotard brake. Located North East USA. Price: $550,000

WATSON HOPPER GXXTA(Ref#10095Tb) Built 2007, GXXTA Double drum. 10" x 42" brakes, Hydraulically equalized brakes. 2 hydraulic winches/Op. console, Hopper 1 to 1 right angle drive. Oil tight chain guards. 30" Hopper air clutches. 4 axle I beam chassis, 51,000" Eaton rear ends. 150 gal fuel tank. Hydrotard brake. Allison transmission, Provision for working floor. (2) toolboxes plus spooling box. 72" T-1 telescoping derrik 140,000#. 12v lights bottom section. Working floor / tong retractor. Chrome main ram and telescoping ram. 24,000# tandem front axle w/ power steering, 4 hydraulic jacks-long extended. Cat diesel engine. Snow/mud combo tires. Located North East USA. Price: $550,000

WATSON HOPPER GXHTA DOUBLE DRUM BACK IN WELL SERVICE RIG(Ref#10412Ta)  3 available, built 2004-2005, 9/16" sand line, Lebus Grooved for 1" tubing line, 106" x 300,000# SHL hydraulically raised and scoped mast, 3-stage raising ram, crown block, tubing board, rod basket, hinged mast base beam, mounted on 5 axle  carrier powered by Detroit 60 Series diesel engine, electric starter, radiator gauges, Allison automatic transmission, hydraulic pump, hydraulic reservoir, hydraulic utility winch, air compressor, air receiver tank, water tank, fuel tank, 4 hydraulic leveling jacks, deadline anchor, folding walkways, stairs, safety rails, 22.5 front and R24.5 rear tires, Budd wheels, McKissick 3 sheave traveling block 83A, elevator links 6", Cavins Model C tubing slips 2-3/8" and 2-7/8", BJ hydraulic power tubing tongs 2-3/8" and 2-7/8", w/air backup, BJ hydraulic power rod tongs ¾" through 1-1/4" heads and backup"s, oil saver double with hydraulic hand pump, 2-3/8" and 2-7/8" tubing elevators, rod hook rod elevators ¾" to 1-1/4", rod wrenches, weight indicator, rod fishing toosl, rod stripper with plate misc hand tools  Price:  $320,000 each

HOPPER GXXTA 550 HP DRILLING RIG(Ref#13501Ra)  7000" class double stand drill, 96" x 212,000# mast, double drum drawworks with 100 ton block on both lines, (2) 125 ton swivel, 18" rotary table, 2 catheadds, 2 hydraulic winches, new drawworks cables on both drums,

HOPPER GXXTA DOUBLE DRUM WELL SERVICE RIG  (Ref#13016Ta)  Built 1977, rebuilt in 2005 double drum back in rig, new tubing drum with 6 months work. 96" x 225,000# Hopper 4-legged derrick, mounted on 5 axle Hopper carrier, 15" Parmac Hydromatic, Detroit 8V92 engine, TC 3 speed transmission   Price:  $115,000

WATSON CORSAIR 400 WORKOVER RIG(Ref#15130T)  Manufactured 2007, double drum, 104" x 250,000# mast, Detroit 60 Series engine, mounted on 5 axle Crane Carrier, McKissick 73 150-ton blocks   Price:  $470,000

HOPPER RTA 750 WORKOVER RIG(Ref#1683Rf)  950 hp, Power- (2) Cat-3408, Transmission- (2) 5860 Allison, Mast- 120" 450,000#, 48" Drawworks, Parmac Hydromatic Brake & Hydraulic Anchor    PRICE:  $475,000

HOPPER WORKOVER RIG(Ref#3009R)  Manufactured 1979, double drum, triple double, sandline, 96" x 260,000# mast, 15" double hydromatic, 150 ton McKissick travelling block, currently drilling, available March 2015  Price:  $525,000

HOPPER WORKOVER RIG(Ref#8562Tb)  Double/Triple 96" x 225,000# derrick, 60 Series Detroit engine, mounted on 4 axle carrier, 750 Allison transmission, sandline, blocks  Price:  $72,500

HOPPER WORKOVER RIG(Ref#8232R)  Manufactured 1965, 95" x 195,000# jack knife mast, mounted on 4 axle drive in carrier, no engine (removed as per ARB regulations, 3 speed with torque convertor, approx 8000" of-1/2" sandline, 90% tires    PRICE:  $250,000

HOPPER BAILER RIG(Ref#4042Ne) Manufactured 1970"s, Natural gas Cadillac V8 engine, mounted on Hopper trailer, needs new tires, sitting long time but running when parked, includes 15 bailers and bucket  Price:  $18,500

Rotary equipment:  27-1/2" Ideco rotary table, National N69 300 ton swivel, 4-1/4" x 40"L square kelly, kelly drive bushings, OWI kelly spinner, OWI pipe spinner

Mud System:  Orbital 3000 dual linear shale shaker, Vortex 2-cone desander, Vortex 10 cone desilter, 500 bbl suction tank, 500 bbl shaker tank, (2) mud mixing and transfer tanks

Other equiment:  Catwalk, 2 Joy air tuggers, 2 pipe racks, 5 pipe tubs, rig lights, 2 pipe tongs, 250 elevators, pipe slips, drill collar slips and elevators, (25) 6-1/4" drill collars, 2012 Surveyor 31" travel trailer, plus many miscellaneous parts and tools to numerous to mentioned.

CARDWELL 500(Ref#4976T)  Manufactured 1981, double drum, new Dragon 96" x 250,000# derrick, 100 ton McKissick blocks, 8V92 Detroit engine, mounted on 5 axle carrier, back end needs repair, workable rig  Price:  $225,000

CARDWELL KB-250(Ref#660N)  Workover rig, Double drum, 96" x 215,000 hydraulically raised mast (rebuilt), Series 60 Detroit diesel engine, TC955 torque converter, TG 627 transmission, Mounted on 5 axle carrier, Leveling jacks, Racking board, Tools, Price:$120,000

CARDWELL 226 DRILLING RIG(Ref#7755T)  72" derrick, 5-10" substructure, Detroit 8V71 engine, National C150 pump with (2) Detroit 671 engines, 125 bbl mud tank, mud mixers, doghouses, light plant, catwalk, pipe tub, shale shaker, (4 loads), no pipe available, located Canada  Price:  $535,000 CAD (Approx $400,000 USD)

CARDWELL KB200 DRILL RIG(Ref#13685Td)  Double drum, air clutches, 75" mast, 28" table, Detroit diesel engine, centrifugal mud pump on deck, comes with 7-1/4 x 14 National duplex mud pump with 500 hp Cummins engine mounted on low boy trailer, 1200" of 5-1/2" Reg x 30" pipe on 40" Hobbs trailer  Price:  $190,000

CARDWELL K200C WELL SERVICE RIG(Ref#9281R)  Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200(Ref#9140R)  Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72" x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission Price: $127,500

CARDWELL K200 WORKOVER RIG(Ref#7281R)  Double drum, double pole, 9/16" x 6500" line on sandline, 7/8" tubing line, (2) – 2 Sheave McKissick block, mounted on International truck with Cummins (rebuilt) diesel engine, 145 Waukesha engine on deck, Foster 58 tongs, elevators, handles 3500" of 23/8" tubing, new brake pads on tubing drum, new PTO, new hydraulic tank, new tubing line, all new connections.  PRICE: $110,000

CARDWELL 150 DOUBLE DRUM WORKOVER RIG (Ref#8120Re)  Drum size 33", 80,000# on 1981 IHCF2574, no pole.  PRICE: $110,000  Pole available at extra cost

CARDWELL KB-150 WORKOVER RIG(Ref#8990T)  Built 1979, 72" x 150,000# sing;e/double derrick, Detroit 8V91 Turbo, Allison automatic transmission, adjustable height work platform, mast lighting with Onan 6000 RV quiet generator, new 84" elevator links, 3 sheave McKissick 75 ton blocks  Price:  $215,000

CARDWELL H(Ref#986N)  double drum workover and cable tool rig, mounted on 1999 56" tandem axle trailer (98,000# capacity), 1800" sandline with about 4,000" of new line on a spool, new block, doghouse on trailer, 6 cylinder Hercules deck engine propane, 55" pole with 3 settings 42", 48" and 55", (3) 15 ton manual jacks, 20" stem and jars, elevators, bails, boomers, tubing group slip, quick hitch block, (2) breakout tongs, tubing tong, rod wrenches, cable line cutter, 30" bailer, 2-7/8" elevators, (4) tubing slips, 2-3/8" elevatros, spudding attachment, (2) hyd jacks and (1) manual jack,  Price:  $55,000

CARDWELL WELL SERVICE RIG(Ref#8858T)  65" mast, Cat 3208 deck engine, spudding beam, 35 ton McKissick block, mounted on 1988 Ford L9000 with Cat engine  Price:  $65,000

CARDWELL WELL SERVICE RIG(Ref#10414Tc)  Detroit 8V71 engine, Allison 750 transmission, 15" double Hydromatic brake, Franks 96" x 150,000# triscope hydraulically raised and scoped mast, rod and tubing boards, 4 axle carrier, leveling jacks, utility winch, work platform, 100 ton McKissick    PRICE:  $49,500

MAINLINE36-08 WORKOVER RIG(Ref#15513Rb)  Double drum, manufactured 1981, June 2002 Recert., double single, 69" x 120,000# hydraulically raised mast, mounted on 4 axle carrier with 8V71 Detroit, 5 speed auto transmission, hydraulic outriggers, sand drum requires bearings, located Canada    PRICE:  $120,000

MAC 400 DRILLING RIG(Ref#10567R)  Rated to 8500" with 4-1/2" drill pipe, MAC 400 drawworks with hydromatic brake, catheads, p/b Cat 3408 (450 hp) with air clutch and torque converter, Gardner Denver FXN 7-1/2 x 14" duplex mud pump p/b Cat 3408, 98" x 280,000# PJ Services Mfg free standing mast, scopes with kig pin and two axle dolly, can rack 8500" of 4-1/2" drill pipe, 125 kw generator p/b Detroit 671 in steel house with all switchgear and transformer (2nd gen set inoperable and not included), steel house includes parts cabinets, work area and storage.  One piece substructure 8"H x 15"W x 34"L with 4" fold down wings, enclosed parts house and large volume tank, top dog house scopes dow into 400 bbl water tank, heater, lockers, knowledge box, 17-1/2" Brewster rotary table, 4-1/2" square kelly, 3-sheave (6 lines) hook/block grooved for 1-1/8" line, 150 TSM swivel with new wash pipe and packing, Regan 10" annular blowout preventor, Mud system with single cone desander, Mission Magnum mud mixing pump, mud stirring guns (rig uses earthen pits), lower kelly valve, inside BOP.  Kelly hose (new), vibrator hoses (3), 2500" 1-1/8" drill line (new), mouse hole, mouse hole driller, weight indicator, tong torque gage, Bear automatic driller, one-pen drill recorder, Sure Shot deviation instrument, mud gauges, 3 sets pipe racks, type C rotary tongs, lights for derrick, substructure, mud pump, generator house, drill collar slips, 2 sets drill pipe slips, Quincy 325 air compressor with electric motor, slick line wireline unit, mounted on single axle trailer. Stacked since 2010, located USA  PRICE:  $225,000

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Franks 844 TD-HT draw works with   3/4″ Tubing Line. New Air Clutches have been added to the draw works and it is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.