franks workover rig quotation

Franks Double Drum back-in Wellservice/Workover unit. Lebus Grooved for drill line & sand line w / line type weight indicator, air clutches & controls and McCormick 300,000 lb weight indicator. 10,000′ New sand line.Tongs included, no tools.

Mast:Franks 84’ 4-leg mast, 120,000 lb. Static hook load, hydraulically raised & scoped w/(2) raising rams, (5) sheaves, crown safety platform, and double tubing board, rod board, ladder, guy lines and adjustable working platform.

Carrier: All above mounted Franks tandem axle front, tandem rear carrier, Detroit 8V92 diesel engine w/ electric start, radiator, gauges, hydraulic pump, Allison 5964 6 speed transmission, single man cab, tool boxes, hydraulic reservoir, water tank, air receiver tank, (2) 100 gallon fuel tanks, (2) hydraulic leveling jacks, hydraulic winch, Hercules 118 deadline anchor, folding walkways, safety rails, stairs, 65R22.5 front tires & 12R22.5 rear tires.

Also ask me about my entire supply line of other oil patch equipment, New, Used and Surplus, Mud Systems, Vessels, Casing, Tubing, Swivel Rotary, Rods, Gas Turbines, Steel and Fiberglass Production Tanks, Backhoes, PumpJacks, Rods CNG Compression Packages, Tongs, Swivel Joints, Heavy Equipment, Drilling and Workover Rigs, Construction! Do you have any oilfield equipment that you seek to market? I Get Quality Oilfield New, Used and Surplus Equipment.

Well Service | Workover Rigs - WELL SERVICE RIG - FRANKS 1287-160-DTD-HT D/D Well Service Unit p/b DETROIT 8V-71N Diesel Eng, ALLISON CBT-4460-1 Trans. SERVICE KING 96" 180,000# Hydraulically Raised & ... More Info

Well Service | Workover Rigs - FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96’H 150,000# Tri-Scope Telescopin... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b CAT 3406 Diesel Eng, ALLISON HT-750 Trans, FRANKS 96’H 180,000# 4-Leg Telescoping Mast, Hydraulically Raised & Scoped w/4-Sheave... More Info

Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102’H 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Db... More Info

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Franks 844 TD-HT draw works with   3/4″ Tubing Line. New Air Clutches have been added to the draw works and it is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.

Franks 300 D.D. powered by a Detroit Series 60 with a HT 750 Allison transmission mounted on a Franks four axle carrier with a Franks 96 ft .. 215,000 lb. capacity derrick. This rig is equipped with an adjustable driller and work platform system up to 17 ft., hydromatic, hydraulic jacks, winch, B.O.P. controls.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Franks Double Drum back-in Wellservice/Workover unit. Lebus Grooved for drill line & sand line w / line type weight indicator, air clutches & controls and McCormick 300,000 lb weight indicator. 10,000′ New sand line.Tongs included, no tools.

Mast: Franks 84’ 4-leg mast, 120,000 lb. Static hook load, hydraulically raised & scoped w/(2) raising rams, (5) sheaves, crown safety platform, and double tubing board, rod board, ladder, guy lines and adjustable working platform.

Carrier: All above mounted Franks tandem axle front, tandem rear carrier, Detroit 8V92 diesel engine w/ electric start, radiator, gauges, hydraulic pump, Allison 5964 6 speed transmission, single man cab, tool boxes, hydraulic reservoir, water tank, air receiver tank, (2) 100 gallon fuel tanks, (2) hydraulic leveling jacks, hydraulic winch, Hercules 118 deadline anchor, folding walkways, safety rails, stairs, 65R22.5 front tires & 12R22.5 rear tires.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The concentric tubing workover rig has alleviated considerably the high cost of offshore well servicing; and dual, triple and quadruple conventional completions in upper zones can be dealt with economically. But there are a lot of problems yet to be solved, and the inventive technologist still can have his field day.The Concentric Tubing Concept Basic Technique

The offshore concentric tubing rig is a completely self-contained, highly transportable, skid-mounted workover unit that has been designed for offshore workover operations. The concentric technique calls for leaving the production string in place and running small concentric pipe inside the production tubing to perform a variety of workover operations (Fig. 1) perform a variety of workover operations (Fig. 1) requiring a circulating flow path. The primary reason for performing concentric tubing workovers is economic. Savings result from reduced workover time and reduced rig cost by avoiding the necessity to retrieve and re-run the installed well tubing and packers.Rig Equipment

A typical rig (Fig. 2) consists of drawworks, mast, two triplex plunger pumps, manifolded measuring and mixing tanks, 1-in. nominal tool-jointed pipe, blowout-preventers, and the necessary handling tools, controls and accessory equipment required for workover operations. The hook-load capacity of these rigs varies from 50,000 to 100,000 lb. The rig is broken down into small packages for fast rig-up and for offloading and onloading with small "stiff-leg" platform cranes. A rig breaks down so that it can be handled in 12 to 17 lifts with an 8,000-lb capacity crane.Evolution of Use

Concentric tubing techniques are a logical extension of wireline permanent-type completion methods, which used a tubing extension landed and retrieved by wireline. A concentric tubing set-up can be described as a tubing extension that reaches all the way to the surface. Continuous tube to the surface, and the rigs specifically designed to handle it, have resulted in the substitution of concentric tubing workovers for many potential, permanent-type well completion workovers.

After these techniques had been proved on land and in straight holes, the economics made their use in offshore directional wells especially attractive. This discussion covers Humble"s experience in Louisiana offshore operations where about four or more concentric rigs have operated continuously for over 5 years. In the past 2 years, the level of this work offshore for Humble has increased to as many as 14 rigs.Offshore ExperienceTubingless Wells and Lower Zones of Conventional Wells

Franks 1058 triple-double/triscope, Tooled Out! Engine refurbished/replaced in 2016 and was just put in 2019. Work Ready Rig! Message us below for purchasing or to schedule a site inspection