workover rig derrick hand free sample

Listened to mud pumps and check regularly for vibration and other problems, in order to ensure that rig pumps and drilling mud systems are working properly.

Inspect all rigging equipment prior to use. Tag and remove from service any damaged cables, wire ropes, shackles, chains, slings, hooks and other equipment not meeting inspection criteria.

Description :Verified correct valve alignment prior to transferring and receiving large quantities of drilling fluids and dry powder products from supply boats and on the rig.

Summary :To ensure personnel keep hands and fingers out from between equipment when guiding, aligning or assembling. Taglines, boards, or rods should be used to position equipment.

Listened to mud pumps and check regularly for vibration and other problems, in order to ensure that rig pumps and drilling mud systems are working properly.

Objective :Seeking a position in a progressive company with room for advancement. Operate drill floor equipment, handle tubular and handling tools on the rigs floor for the purpose of supporting drilling operations

Summary :Experienced directional drilling superintendent capable of organization and management of crews, rig drilling production, daily reporting on projects, designing and implementing budgets, acquiring materials and supplies, and monitoring performances.

Implemented all directional drilling plans and procedures according to the company plan and oversee all drilling operations of rig site and ensure compliance to all drilling objectives.

Here"s how flow lines is used on derrick hand resumes:Worked in the derrick latching pipe and pulled rods in the rod basket Serviced well heads and flow lines

Rules and regulation set by a company that reflect the company"s code of conduct are called company policies. These rules apply to people anywhere in the company. The policies may apply inside and outside of the workplace. Company policies are mentioned in an organization"s handbook.

Here"s how company policies is used on derrick hand resumes:Maintained and carried out all company policies and procedures to stay in accordance with all safety regulations and compliance.

Here"s how heavy equipment is used on derrick hand resumes:Worked on the Rig Floor with heavy equipment in a four man crew working using tongs to connect drill pipe.

Here"s how drill pipe is used on derrick hand resumes:Mixed sack chemicals, ran casting, tagged casing through V-door and unhooked cables from casing, tubing and drill pipes.

Zippia allows you to choose from different easy-to-use Derrick Hand templates, and provides you with expert advice. Using the templates, you can rest assured that the structure and format of your Derrick Hand resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Here"s how h2s is used on derrick hand resumes:Attended a H2S Safety Course and a safety course through West Texas Safety Training Center for Chevron petroleum.

Here"s how mud pumps is used on derrick hand resumes:Maintained all safety policies and procedures-Worked in the derricks-Assisted driller as needed-Relief drilling-Maintained mud pumps and equipment-Maintained drilling fluids per mud program

Assist in rig moves: help with rig-up / rig-down, nipple up and down blowout preventers, assist with general assembly and maintenance and help prepare new…

The Floorhand performs the duties of general manual labor on the rig and supports and assists other members of the drilling crew during all rig operations.

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry or construction is beneficial.

Assist in rig moves: help with rig-up / rig-down, nipple up and down blowout preventers, assist with general assembly and maintenance and help prepare new…

Must have reliable transportation to and from the rig. Nabors Alaska Drilling operates in the State of Alaska with some of the most versatile oil and gas…

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry or construction is beneficial.

Assist in rig moves: help with rig-up / rig-down, nipple up and down blowout preventers, assist with general assembly and maintenance and help prepare new…

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry, or construction is beneficial.

Develops an understanding of all major rig components and the necessary servicing. Prior experience in oil field, heavy industry or construction is beneficial.

Now accepting applications for the following full-time positions: *. *Floor Hands - *minimum experience required 6 months. Medical, Dental, and Life Insurance.

Are you looking to begin your career as a Floorhand, a Roughneck on an oil and gas drilling rig? Reliable means of transportation to and from rig site.

Assists to install and services all rig motors, rotary drives, air compressors and forklifts. Knows the proper oils, oil levels and service schedules, e.g.…

n: a record made each day of the operations on a working drilling rig and, traditionally, phoned, faxed, emailed, or radioed in to the office of the drilling company and possibly the operator every morning.

(pronounced "tower") n: in areas where three eight-hour tours are worked, the shift of duty on a drilling rig that starts at or about daylight. Compare evening tour, morning (graveyard) tour.

(pronounced "tower") n: in areas where two 12-hour tours are worked, a period of 12 hours, usually during daylight, worked by a drilling or workover crew when equipment is being run around the clock.

n: a large load-bearing structure, usually of bolted construction. In drilling, the standard derrick has four legs standing at the corners of the substructure and reaching to the crown block. The substructure is an assembly of heavy beams used to elevate the derrick and provide space to install blowout preventers, casingheads, and so forth.

n: the crew member who handles the upper end of the drill string as it is being hoisted out of or lowered into the hole. On a drilling rig, he or she may be responsible for the circulating machinery and the conditioning of the drilling or workover fluid.

n: a high-compression, internal-combustion engine used extensively for powering drilling rigs. In a diesel engine, air is drawn into the cylinders and compressed to very high pressures; ignition occurs as fuel is injected into the compressed and heated air. Combustion takes place within the cylinder above the piston, and expansion of the combustion products imparts power to the piston.

n: the employee normally in charge of a specific (tour) drilling or workover crew. The driller’s main duty is operation of the drilling and hoisting equipment, but this person may also be responsible for downhole condition of the well, operation of downhole tools, and pipe measurements.

n: an internal-combustion engine used to power a drilling rig. These engines are used on a rotary rig and are usually fueled by diesel fuel, although liquefied petroleum gas, natural gas, and, very rarely, gasoline can also be used.

n: a type of portable service or workover rig that is self-propelled, using power from the hoisting engines. The driver"s cab and steering wheel are mounted on the same end as the mast support; thus the unit can be driven straight ahead to reach the wellhead.

Roughneck is a term for a person whose occupation is hard manual labor. The term applies across a number of industries, but is most commonly associated with the workers on a drilling rig. The ideal of the hard-working, tough roughneck has been adopted by several sports teams who use the phrase as part of their name or logo.

Originally the term was used in the traveling carnivals of 19th-century United States, almost interchangeably with roustabout. By the 1930s the terms had transferred to the oil drilling industry. In the United Kingdom"s oil industry starting in the 1970s, roughneck specifically meant those who worked on the drill floor of a drilling rig handling specialised drilling equipment for drilling and pressure controls. In practice, these workers ranged from unskilled to highly skilled, depending subjectively on the individual worker"s aptitude and experience. By contrast, a roustabout would perform general labor, such as loading and unloading cargo from crane baskets and assisting welders, mechanics, electricians and other skilled workers. The word roughneck was in use in the U.S. oil drilling industry even earlier and had a similar meaning.

In oil fields, a roughneck"s duties can include anything involved with connecting pipe down the well bore, as well as general work around a rig. The crew of a land-based oil rig can be further divided into several positions:

Derrickhand (derrick-man): Responsible for the drilling mud, the mud pits where drilling fluids are circulated around the system, and the mud pumps, as well as being the hand up in the derrick manipulating stands into and out of the fingers during tripping operations. Acting as a lead for the driller who is mostly restricted to the rig floor. In many cases the derrickman is exclusively responsible for work in the derrick during "tripping" pipe in and out of the hole.

Motorman (motorhand): Responsible for maintenance of various engines, water pumps, water lines, steam lines, boilers and various other machinery incorporated into the rig on a daily basis. Also responsible for movement of equipment on site. On a four-man drilling crew the motorman is also the chainhand.

Boilerman: Though this position is now obsolete, before the mid-20th century, when most rigs were steam-powered, the boilerman was responsible for the boilers. The boilerman also functioned as the laundryman, steam-cleaning the last crew"s greasy work clothes in the "blow barrel" and then hanging them up to dry in the warm air near the boilers.

Chainhand (Floorhand): This position is given to a floorhand that can also throw the chain that helps spin up the connections, but as of 2013automated on the drilling rigs is pretty much just another floorhand that watches out for the worm and does not get as filthy.

Leadhand/Floorhand ("worm"): Usually the lowest member of the drilling crew, those in this position are often nicknamed "worm", because this hand has the dirtiest and most physically demanding position. The floorhand works primarily on the rig floor where he is the one actually operating the tongs, iron roughneck, tugger, and catwalk, and doing pretty much any other job which is asked of him.

Roustabout (leasehand): On bigger rigs and offshore rigs, a roustabout does most of the painting and cleaning so roughnecks can take care of other work.

The Edmonton Oilers of the National Hockey League used to use an oil rigging roughneck with an ice hockey stick as one of their secondary logos. The roughneck, as a symbol of hard work and fortitude, was the inspiration for the Calgary Roughnecks lacrosse team, as well as the Tulsa Roughnecks of the North American Soccer League, the Tulsa Roughnecks of the United Soccer Leagues, and the Tulsa Roughnecks FC of the USL. The West Texas Roughnecks of the Indoor Football League also use this nickname. In the BAFA National Leagues, the Aberdeen Roughnecks have also adopted the nickname. In the AUDL (American Ultimate Disc League) the Dallas team is also the Roughnecks. One of the inaugural teams of the revamped XFL was the Houston Roughnecks

These workers often climb on elevated equipment such as drilling and service rigs. That’s why fall protection is required to protect workers in these situations.

A derrickhand is one of those employees who needs to work from heights. And it’s one of the highest risk jobs for experiencing a fall. Derrickhands guide stands of drill pipe into the equipment’s fingers. They do this while tripping out the hole, or removing the drill string. This is done from an elevated position on the derrick. Not an easy job. And not the safest either.

Let’s say one of your workers was assigned to work as a derrickhand. When he gets to the jobsite, will there be fall protection equipment available to him? Does he know how to use it? Does he knowwhyhe needs to use it? These are the questions you should be asking yourself.

First, the hand must climb the derrick ladder. These ladders can be anywhere from 30 to 100 feet long. The ladders can be slippery, as they are often covered in grease, snow, or ice. Ladders are usually offset. This means the worker must transition from one ladder to the next. So climbing the derrick ladder is a hazard itself.

The employee faces even more fall hazards when he reaches the platform. The walkways up there have several gaps in the flooring. And they can be slippery, too. Handrails aren’t always present, and even if they are, much of the area remains exposed.

In 2012,on an employee who died after falling 90 feet from the derrick to the rig floor. The employee was not wearing fall protection. The sad truth is that his death could have been easily avoided.

A derrickhand must follow the ABC’s of fall protection equipment: Anchor, Body Harness, and Connector. This equipment needs to be readily available to the employee. It could literally save his life.

Body Harness-A full body harnessmust be provided to employees who wear fall protection equipment. Derrickhands, in particular, need a special type of harness. 3M and

Positioning lanyardsare also considered to be a connector. However, they serve a slightly different purpose. Instead of arresting a worker after a fall, a positioning lanyard prevents employees from ever experiencing a fall. Derrickhands should wear both a fall arrest lanyard and a positioning lanyard.

A second SRL should be located on the platform, ready for the employee to use. After stepping onto the platform, the employee should connect to this new lanyard. This is done while still keeping the original SRL connected.Note:There should be a brief period in time where the worker is connected to both SRL’s. This ensures 100% tie-off, and that the employee will never be without protection. Once connected to the second SRL, he can (and should) disconnect the first one.

So, when your employees are working on derricks, make sure they are tied off properly. Train them on the hazards of the job. Train them how to use the fall protection equipment. Most importantly, train them to never take risks when it comes to fall protection safety.

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in the United States and one of the leading onshore, rig-based well servicing contractors in the world.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in theUnited Statesand one of the leading onshore, rig-based well servicing contractors in the world.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.

Floorhands & Derrickhands are primarily responsible for performing various manual labor tasks throughout the rig site, including rig up and down activities, general equipment repairs and maintenance on rig components, conducting assigned activities on the rig floor or derrick, assisting with mud-mixing duties, and other various duties. The Floorhand & Derrickhand are responsible for performing these duties safely and efficiently under the direct supervision of the driller or the assistant driller.

Major Duties:Performs rig up, down, and operating activities for up to 12+ hours per day.  Based on experience, this position includes catching samples, using of the tongs, slips, and chain  -  connecting and disconnecting drilling pipe, tubular and drilling bits or tools, and checking hoist lines and ropes for blocks.

This is a real resume for a Derrickhand in Achille, Oklahoma with experience working for such companies as Nomac Drilling Llc, Goober Drilling, Keen Energy Services. This is one of the hundreds of Derrickhand resumes available on our site for free. Use these resumes as templates to get help creating the best Derrickhand resume.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The Yard Hand is responsible for keeping the yard location and shop clean, picked up and clear of safety hazards. It is necessary that every hand be mentally alert and physically fit during the workday. The Yard Hand will assist in sorting and staking incoming and outgoing materials and inventory. Responsibilities include assisting welders, mechanics, and/or electricians. General assembly of drilling equipment is required along with minor sandblasting and painting. Driving a Fork Lift (after receiving Fork Lift Training Classes) will be included in the general duties. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 50 times in a 12 hour period. The ability to lift items weighing 50lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 25lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 50 lbs. The work performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

There are two floor hand positions: Floor Hand and Lead Tong Hand. Each must daily inspect the tongs, breakout line, snub lines, and tong dies for damage, excessive wear, fraying oil soaks, etc. and keep them safe and in good repair. During normal drilling operations duties include washing, cleaning, mechanical repairs, digging ditches, drill pipe connections, drill pipe trips and other manual handling and/or maintenance activities as required by operational needs. While tripping (adding additional pipe to the stand), the Lead Tong Hand must pull and install the busing assembly. This activity will include lifting the tongs and lateral movement of the tongs to attach them to the drill pipe. The tongs are on counterweights and the exertion required to lift them would vary, but is estimated to be similar to lifting weights between 10-30 pounds. The lifting range up or down is 1-2 feet, in the area of the waist. This activity is repeated and could be performed as many as 175 times in a 12-hour Shift. Another activity conducted between tong usages is “pulling the slips.” This activity is performed by 2 or 3 men (depending on crew size) and could be conducted as many as 175 times per a 12-hour shift. The slips weigh between 100 and 175 pounds and the weight would be distributed between the 2 or 3 employees. The slips are located at floor level and would be lifted a distance of 18-24 inches. Racking pipe is another function performed by one of the Floor Hands during a drill pipe trip and involves manually pushing a suspended length of pipe to the area where it is racked. The reverse activity involves restraining the suspended pipe and guiding it across the rig floor. This activity is performed in the standing position and could be performed as many as 100 times per a 12-hour shift. Tripping the pipe string is an operation which involves removing all of the pipe from the well bore and racking it in the derrick. The pipe may be removed for various reasons, but usually is done to replace a drill bit on the end of the drill string. After the operation is complete, the pipe is “tripped” back into the well bore. The tripping operations vary depending on the depth of the well and other factors. Employees may be involved in the tripping operation for the full 12 hours of their work shift. The Floor Hand is responsible for catching and cleaning samples of formation cuttings while drilling. If drilling in gas, he must keep the flare bucket burning. At times it is necessary for the Floor Hand to climb up in the derrick and assist the derrick hand such as bridling up or bridling down. He must also be able to go up and grease the traveling blocks and bridle line sheaves. All hands working together must keep the rig clean, picked up and free of safety hazards. It is necessary that every hand be mentally alert and physically fit during his tour. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectoralis, and Hand Grip.

The motorman’s primary responsibility is to take care of all the motors on the rig. He must have a mechanical mind and the ability to trouble shoot and identify and repair minor problems that arise. He is responsible for checking the oil, oil pressure, temperature, fuel pressure and radiator water level and to record his findings in the daily engine report during his tour. He must be mentally alert and physically fit during his tour. Other responsibilities include racking pipe on the racking board when coming out of the hole and fill pipe when going in the hole. He is responsible for operation of the closing unit when shutting the well. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 150 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 80% of the time. The ability to kneel up to 15% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Derrick Hand is the crew member whose work station is in the derrick while drill pipe is being hoisted or lowered in the hole. He attaches the elevators to the stands of drill pipe while the pipe is being lowered into the hole and detaches the elevators and racks the pipe while the pipe is being hoisted out of the hole. Both operations involve the use of the arms and upper body to hold or pull the pipe. This operation could be repeated as many as 80 to 100 times during a 12-hour shift. He is responsible for greasing and inspecting the crown and all sheaves in the derrick. He must be mentally alert and physically fit while on duty. Other responsibilities of the Derrick Hand include mixing chemicals. The chemicals are packaged in paper bags and plastic buckets. The packages vary in weight from 20 to 80 pounds. Lifting and carrying is required to get the materials from the storage area to mixing areas. Manual handling of the packages or bags could require lifting from floor level to levels between 36 and 42 inches high. Unusual circumstances might require the lifting of numerous bags during a 12-hour shift. He is also responsible for watching the mud pits for an increase or decrease of mud volume, mud weight, and changes in funnel viscosity and gas cut mud. He must also watch and listen to the mud pumps to know when there is a problem. Activities will be as follows: The ability to push/pull items weighing 50lbs 20 to 175 times in a 12 hour period. The ability to lift items weighing 100lbs from the floor to 42" 10 to 20 times a day for a 12 hour period. The ability to carry items weighing 100lbs 10 to 20 times a day for a 12 hour period. The ability to stand up to 99% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

The Driller (crew foreman) is directly responsible for the rig crew during normal operations. He must be able to perform any job on the rig required of his hands, in order to instruct his crew on the “how to” procedure or to fill in as a Floor Hand as necessary. Refer to Job & Task Descriptions forms on Floor Hand, Motor Hand, and Derrick Hand for position requirements. He must know the safe operating limits of the rig and keep within those bounds. He is responsible for the operation of drilling and hoisting equipment. Actual rig operations involve the use of both hands and feet to operate controls. The Driller must be able to see gauges and dials at distances between 1 to 10 feet. He must be able to see the Derrick Hand at a distance of 60 to 90 feet away. He must be physically fit and mentally alert at all times to the operations taking place and crew participation. Activities will be as follows: The ability to lift items weighing 100lbs from the floor to the waist 8 to 10 times a day for a 12 hour period. The ability to carry items weighing 100lbs 8 to 10 times a day for a 12 hour period. The ability to stand up to 100% of the time. The ability to climb up to 35% of the time 20 to 50 steps. (Up and Down @ 12 times per shift) Primary Duties of this position require maximum level of physical activity. The employee must be able to tolerate 12 hours of standing, climbing, lifting, pulling, pushing, and carrying weights of up to 100 lbs. The work is performed outside with prolonged exposure to the environment, both hot and cold. Operations could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet. Muscle groups include: Quadriceps, Low Back Extensors, Hip Extensors, Abdominal, Latissimus Dorsi, Deltoid, Pectorals, and Hand Grip.

Mechanics and Techs are responsible for repairing and rebuilding equipment used on conventional and advanced drilling rigs. Employees will be trained on the job to service TOP DRIVES, MUD PUMPS, DRAWWORKS, IRON ROUGHNECKS, HYDRAULIC UNITS along with CONTROLS and INSTRUMENTATION for electronic drilling rigs. Mechanics and Techs must be mechanically inclined, work safely, able to work long hours, self-motivated, and proficient with various tools. It is necessary that every hand be mentally alert and physically fit during the workday. Also, employees must have a clean driving record and available to be “on-call”. Activities include: The ability to work and communicate with a team of people, the ability to push/pull/lift items weighing 80lbs repeatedly; the ability to climb up 20 to 50 steps, and the ability to exert a maximum level of physical activity. The majority of work will be performed outside with prolonged exposure to the environment, both hot and cold. Service calls could also involve prolonged exposure to wet or damp conditions, i.e. working in rain, snow, and sleet.