workover rig floorhand brands

2+ years previous oilfield and/or workover rig experience preferred. Work on floors or derricks on the rig as needed. May offer relocation package DOE.

Manages tools on the workover rig floor and assists in daily maintenance. Must have a minimum of 1 year of experience as a workover rig floorhand to be…

The Crew Worker, under the direction of the Rig Operator, performs activities and operates hand and power tools to perform maintenance and repairs to oil or gas…

Looking for experienced Floorhands for Workover Rigs in North Dakota. Full benefits, competitive pay with desirable schedule of TWO WEEKS ON / TWO WEEKS OFF.

Manages tools on the workover rig floor and assists in daily maintenance. Picks up/lays down pipe and latches tubing in elevators. This is a full-time position.

 Minimum 5 years production rig workover experience. Rig workover: 5 years (Preferred). The Gorilla Jack is designed as a supplement to workover rigs and is…

Crew Member positions include Rig Trainee (no experience required), and Floor hand, Derrick hand, Relief Crew Chief, and Crew Chief, which are experience…

The successful candidate will have an outstanding track record of success in workover rig experience in operating heavy equipment while ensuring communication…

As a rig hand, you will need to safely complete tasks and operations as the onsite supervisor instructs. You will be responsible for all aspects of maintaining…

Assist with mobilization and demobilization of the workover rig. Be capable of lifting/carrying 75lbs or more at times. Oil & gas: 1 year (Preferred).

Spot in, rig up, and rig down well service unit (rig). Minimum of 1 year operating rig. Workover rig experience (minimum 6 months verified experience).

Maintains tubing, rod tongs and hand tools on the rig. A minimum of one (1) year rig floor operation experience. Keeps pipe deck and main deck areas orderly.

Maintains tubing, rod tongs and hand tools on the rig. A minimum of one (1) year rig floor operation experience. Keeps pipe deck and main deck areas orderly.

May be required to work floors or operate the rig when needed. Assists in picking up or laying down tubing, manually lifting the tubing from the rack onto the…

Performs housekeeping around rig, keeping rig floor clean and clear of tools after each trip. Assists in drilling rig erection (rig up) and dismantling (rig…

Nabor Industries, a drilling rig operator headquartered in Bermuda with principal offices in Houston, ranks second with 42 active horizontal rigs. Calgary oilfield service company Ensign Energy Services ranks third with 33 horizontal drilling rigs deployed in Texas.

Combined, the three companies account for more than half the active horizontal rigs in the nation’s busiest and largest oil fields, which include the Permian Basin of West Texas, the Eagle Ford Shale of South Texas and the Haynesville Shale of East Texas.

Facing crude oil prices stuck in the mid-$50 per barrel range, the U.S. rig count has fallen to levels not seen since March 2017, when the industry was barely beginning to recover from the oil bust that began in 2014 and led companies to lay off tens of thousands of workers.

Exxon Mobil, headquartered in Irving, has 35 drilling rigs in operation across the state. Poised to become the number one driller in Texas, Exxon Mobil has filed for more than 600 drilling permits so far this year. More than 87 percent of those were for projects in the Permian Basin followed by 7 percent in the Eagle Ford, 1 percent in the Haynesville and the remainder elsewhere in the state.

Midland exploration and production company Diamondback Energy, which drills exclusively in the Permian, has 20 drilling rigs in operation. So far this year, Diamondback has filed for 377 drilling permits almost evenly split between the Midland Basin in the eastern end of the region and the Delaware Basin in the western end.

Irving exploration and production company Pioneer Natural Resources also has 20 drilling rigs in operation. The company has filed for 359 drilling permits so far this year. Only one of those permits was for an Eagle Ford project while the rest were all for wells in the Midland Basin.

The land drilling market worldwide is structured primarily as a rental market, not a sales market, where land drilling companies lease their rigs to E&P companies for an agreed period of time – weeks, months, or years – at a day-rate. The rigs are then used to drill wells and execute the E&P’s drilling programs.

Drilling opportunities are analysed and explored in order, leaving a series of dry holes, until a discovery is made. It is rare for an E&P company to actually own the rigs which they operate, but there are some exceptions such as Chesapeake, who will purchase their own fleet of rigs.

Investors require a minimum level of return for their investment dollars in drilling operations, and typically equate cost with risk. These turnkey drilling contracts may limit risk by guaranteeing a minimum number of wells that can be drilled with the rig. The contract will also outline how the rig can be used – including the pieces of equipment, when to change pieces, temperature and pressure tolerances and the weight of mud.

Nabors operates the world’s largest land drilling rig fleet, with around 500 rigs operating in over 25 countries – in almost every significant O&G basin on the planet. It also has the largest number of high-specification rigs (including new AC rigs and refurbished SCR rigs) and custom rigs, built to withstand challenging conditions such as extreme cold, desert and many complex shale plays.

Headquartered in Tulsa, Oklahoma, H&P is a global business with land operations across the US, as well as offshore operations in the Gulf of Mexico. It is engaged primarily in the drilling of O&G wells for E&P companies, and recognised for its innovative FlexRig technology.

Patterson-UTI operates land based drilling rigs, primarily in O&G producing regions of the continental US, and western Canada. The company also provides pressure pumping services to US E&P companies and specialist technology, notably pipe handling components, to drilling contractors globally.

Precision is an oilfield services company and Canada’s largest drilling rig contractor, with over 240 rigs in operation worldwide. The Company has two segments. The Contract Drilling Services segment operates its rigs in Canada, the United States and internationally. The Completion and Production Services segment provides completion and workover services and ancillary services to O&G E&P companies in Canada and the US.

Pioneer operates a modern fleet of more than 24 top performing drilling rigs throughout onshore O&G producing regions of the US and Colombia. The company also offers production services include well servicing, wireline, and coiled tubing services – supported by 100 well-servicing rigs, and more than 100 cased-hole, open-hole and offshore wireline units.

In Texas, generally considered to be the centre of US land drilling, RigData reports that there are currently 678 active rigs – split between Helmerich & Payne (160), Patterson-UTI (85), Nabors (64), Precision Drilling (39) and 77 other drillers (330).

Most new onshore rigs, both drilling and work over rigs, are built by OEMs in China. In the US, the larger vertically integrated land drillers have in-house manufacturing operations, so they will outsource some equipment construction, but assemble the new rigs at their own facilities. The leading provider of US newbuild rigs is National Oilwell Varco.

The secondary market, where existing rigs are sold, is largely auction dominated with mostly older rigs changing hands. As a rule, the big land drillers do not sell their newbuild rigs, as each has their own flagship designs.

The Floor hand is responsible for performing service rig functions to ensure continuous production in line with established standards. They work on oil and gas drilling rigs under the supervision of a driller, perform routine inspections on equipment, and conduct maintenance checks.

Also, they help in removing or installing wellhead and associated equipment and report safety hazards, accidents, or maintenance issues to the rig operator or supervisor. Additionally, they service gas and oil wells and transports rigs, and other vehicles. The floor hand also performs other tasks as assigned.

The following is a list of seasonal work gear worn by drilling rig workers. Savanna supplies rig employees with coveralls, hard hat, safety glasses & impact gloves (1 pair).

Drilling rig crews are generally made up of six (6) people: Rig Manager, Driller, Derrickhand, Motorhand, Floorhand, and Leasehand. Each crew works 12 hours shifts as the rig operates 24 hours per day, and each position is vital to the operation of the rig.

Work in the oil and gas services industry is seasonal. Because of the weight of rigs and their equipment, and the remote location of wells, these locations are often only accessible when the ground conditions can tolerate heavy loads. Therefore, wells are typically drilled and serviced in the winter when the ground is frozen solid, or in the summer, when the ground has thawed and dried sufficiently. During the spring and fall, when the ground is in a transitional state, it is too soft to move equipment on and easily damaged. For this reason, provincial governments implement “road bans” prohibiting heavy loads from operating in certain areas. During this time, rig work is slower, and many rigs are shut down and their crews sent home. Be prepared to be off for anywhere from 6 to 12 weeks without pay during this time. However, rigs that are shut down are usually in need of maintenance, and there may be opportunities for employees who would like to help in this regard. Employees may be eligible for Employment Insurance benefits during seasonal shutdowns.

To work on a drilling rig, you must be able to get to and from all of your work locations.  As drilling often occurs in remote areas, having reliable transportation is considered mandatory for non-camp locations. Drilling rigs commonly operate 24 hours per day, 7 days per week with either three crews working 8 hour shifts or two crews working 12-hour shifts. Most often day crews and night crews will alternate weekly, so each crew has a chance to work during both the day and night. Most crews will work 14 days straight with 7 days off in-between. The typical living situation while working falls into three categories: Non-Camp, Full Camp and Texas Camp.

Non-Camp: When the rig site is near a town, non-camp conditions normally apply. Crews will stay in hotel rooms and receive a per day living allowance for food and accommodation. The living allowance is paid out on your pay cheque based on days worked, therefore you will need to be able to pay for your food and accommodation out of your own pocket.

Full-Camp: When a rig site is in a remote location, crews may stay in a full camp. In a full-camp all food and full accommodation is provided. Once at the camp, the crew travels to and from the rig in the crew truck. Almost all camp work is available in the winter only.

Texas Camp: These camps are typically located nearby the rig location.  Crews are responsible for supplying their own bedding, cooking supplies, groceries and toiletries.  While staying at a texas camp, a daily allowance is provided for food and toiletries.  The living allowance is paid out on your pay cheque based on days worked, therefore you will need to be able to pay for your food and toiletries out of your own pocket.

Once you have completed your orientation, you will immediately receive any other necessary training. This involves Workplace Hazardous Materials Information System (WHMIS) and Transportation of Dangerous Goods (TDG), along with an in-depth General Safety Orientation. This training is mandatory and provided by Savanna at no cost to the employee. Job-related, hands on training is conducted in the field through Savanna’s Rig Mentoring Program.

While it is not mandatory to have this certification, each service rig crew is required to have two members who are certified in Standard First Aid with CPR level C. Therefore, obtaining a certification beforehand is a great way to improve your chances of being hired.

Job Description TheFloorhandposition is a rig crew member whose primary work station is on the rig floor, however the duties and responsibilities are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during...

16 days ago...their operational goals in a safe and efficient manner. Withexperiencein both harsh-environment regions and complex drilling situations... ...Wellbore to get the job done. Job Description TheFloorhandposition is a rig crew member whose primary work station is on...

24 days ago...practices, please refer to the Nabors Code of Conduct. Title:FloorhandOverview: The job of the Floorhand is to safely and... ...Preferred Qualifications: • High school diploma or equivalent • 7 monthsexperienceas a Floorhand for another drilling company...

9 days ago...FloorhandCompany Description Headquartered in Reno, Nevada, Ormat is a leading geothermal company and the only vertically... ...Perform other duties as directed Qualifications EDUCATION,EXPERIENCE,AND SKILLS REQUIRED The ability to understand procedures and...

a month ago...American and International marketplaces. Our workforce, like our technology, is rapidly expanding and looking for a qualified CasingFloorhand.JOB RESPONSIBILITIES Assists the Crew Pusher and/or TRS Lead in carrying out all routine, non-routine and emergency...

9 days agoLOCATIONS INCLUDE: COLORADO, WYOMING, NEW MEXICO   TheFloorhandperforms the duties of general manual labor on the rig and supports... ...command and follows through on instructions Education andExperiencePrior experience in oil field, heavy industry or...

a month ago...SafeGulf, and Well Control Must provide proof of authorization to work in the United States. Have previousexperienceworking as an DeepwaterFloorhandPossess or be willing to obtain an OGUK Medical & 10-panel drug screen. Have knowledge and the skillset...

3 days ago...JOB SUMMARY TheFloorhandsafely performs drilling, tripping, rig moving and maintenance operations as directed. ESSENTIAL FUNCTIONS... ...standards, ensures smooth operations and positive customerexperiences,builds a productive workplace, is reliable, and improves team...

more than 2 months ago...ND Energy Services is looking to hire experienced Workover RigFloorhandwith a strong work ethic and willingness to learn and grow... ...Driver"s License Class A or B CDL, preferred Education &ExperienceHigh School Diploma or equivalent Previous workover experience...

a month agoJob Description \n\n Compensation: $15.50-$17.50/hour Location: Dexter, MI Hours: Full-time, part-time \n 94% of our Care Pros say they have the tools they need to do their job well!\n\n Looking to work for a home care company that values passion and rewards......The Well ServiceFloorhandis responsible for all activities conducted on the rig work floor, operation of the mud pump, and fluid... ...Respects chain of command and follows thru on instructions Priorexperiencein oil field, heavy industry or construction is beneficial...

19 hours ago...The Well ServiceFloorhand& Derrickhand is responsible for the Rig Derrick, its security, maintenance and safety. This job is... ...Respects chain of command and follows thru on instructions Priorexperiencein oil field, heavy industry, or construction is beneficial...

Due to the technical and security risks inherent on the Internet, and because the document you access may differ from the original depending on your browser software, the information set out in this web site should not be used for the purpose of making decisions with respect to AKITA Drilling Ltd. securities. The information posted was accurate at the time of posting, but may be superseded by subsequent disclosures. If you are contemplating trading in AKITA Drilling Ltd. securities, you should contact Investor Relations to obtain printed copies of the documents you wish to review or access them through the SEDAR website at www.sedar.com.

The Workover Rig Floorhand assists the Derrickhand and Operator in a multitude of functions including: tripping pipe, handling tongs, making connections, cleaning, operating machines and maintenance of equipment used on a workover rig.