workover rig work brands

Manufacturer of standard & mobile rigs & carriers for oilfield applications. Includes well servicing from 14,000 ft. to 22,000 ft., workovers from 10,000 ft. to 16,000 ft. & drilling from 6000 ft. to 10,000 ft. Specifications include brakes range from 28 in. dia. x 8 in. wide to 42 in. dia. x 12 in. wide, barrels from 12 3/4 in. x 38 in. to 18 in. x 43 in., chains from 1 1/4 in. to 1 3/4 in., clutches of 24 in. with single & 2 plate air friction outboards, shafts of 5 in. dia. to 6 1/2 in. dia. & gross weights from 63,200 lbs. to 115,000 lbs. Also includes forged steel, demountable options, mufflers with spark arrestors, dry type air cleaners, transmissions with torque converters, water splash brake cooling & up to 6 axles.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Inserting and pulling up pipe tubing from oil wells is a precise and challenging job that not every rig is up for. That’s why you need a mobile workover rig from Dragon to get it done right every time. Our workover rigs are state-of-the-art and ready to tackle even the harshest conditions. A workover rig is perfect for site preparation while a standard mobile oil rig can handle a variety of piping tasks. Need workover rig parts, or service on another mobile rig? Dragon has that covered with our parts selection, too. View all of our workover rigs and other drilling rigs today.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

By connecting with the best workover rigs manufacturers and suppliers you can grow your business and satisfy your clients with top-notch products and services. At ExportHub you’ll find global workover rigs suppliers and manufacturers ready to serve your demands. Regardless of where you are located, you can get your products manufactured easily without setting foot out of your national border. As a leading B2B platform, we highlight the following attributes of the listed manufacturers and suppliers.

Their exceptional mobility, stability, and ease of operation are the outcome of our extensive experience in the design and production of mobile drilling rigs.

Belonging to the same family, Sovonex™ service rigs comprise many of the technological advantages that result in smooth operation and make the life of our customers’ easier:

Wide selection: At our production facility in China we design and develop workover rigs for service depths ranging from 1,600 m to 8,500 m (5,250 ft-27,900 ft), and workover depths from 2,000 m to 9,000 m (6,600 ft-30,000 ft) for 2 7/8” DP.

Full API coverage: The different components of our well-servicing rigs are manufactured to the following API standards:Steel structures, such as the mast: API Spec 4F

Highly maneuverable : Sovonex™ mobile drilling rigs and self-propelled workover rigs possess excellent driving properties in the desert, mountain, and other impassable terrains.

Reduced NPT: The mast is erected hydraulically to reduce time for rig up and increase safety. Likewise, all rig components have been designed to allow for fast assembly and disassembly.

With every service rig, we send technical staff to our customer to provide first-hand technical support. The engineer responsible for the rig design is always part of the service crew.

The land drilling market worldwide is structured primarily as a rental market, not a sales market, where land drilling companies lease their rigs to E&P companies for an agreed period of time – weeks, months, or years – at a day-rate. The rigs are then used to drill wells and execute the E&P’s drilling programs.

Drilling opportunities are analysed and explored in order, leaving a series of dry holes, until a discovery is made. It is rare for an E&P company to actually own the rigs which they operate, but there are some exceptions such as Chesapeake, who will purchase their own fleet of rigs.

Investors require a minimum level of return for their investment dollars in drilling operations, and typically equate cost with risk. These turnkey drilling contracts may limit risk by guaranteeing a minimum number of wells that can be drilled with the rig. The contract will also outline how the rig can be used – including the pieces of equipment, when to change pieces, temperature and pressure tolerances and the weight of mud.

Nabors operates the world’s largest land drilling rig fleet, with around 500 rigs operating in over 25 countries – in almost every significant O&G basin on the planet. It also has the largest number of high-specification rigs (including new AC rigs and refurbished SCR rigs) and custom rigs, built to withstand challenging conditions such as extreme cold, desert and many complex shale plays.

Headquartered in Tulsa, Oklahoma, H&P is a global business with land operations across the US, as well as offshore operations in the Gulf of Mexico. It is engaged primarily in the drilling of O&G wells for E&P companies, and recognised for its innovative FlexRig technology.

Patterson-UTI operates land based drilling rigs, primarily in O&G producing regions of the continental US, and western Canada. The company also provides pressure pumping services to US E&P companies and specialist technology, notably pipe handling components, to drilling contractors globally.

Precision is an oilfield services company and Canada’s largest drilling rig contractor, with over 240 rigs in operation worldwide. The Company has two segments. The Contract Drilling Services segment operates its rigs in Canada, the United States and internationally. The Completion and Production Services segment provides completion and workover services and ancillary services to O&G E&P companies in Canada and the US.

Pioneer operates a modern fleet of more than 24 top performing drilling rigs throughout onshore O&G producing regions of the US and Colombia. The company also offers production services include well servicing, wireline, and coiled tubing services – supported by 100 well-servicing rigs, and more than 100 cased-hole, open-hole and offshore wireline units.

In Texas, generally considered to be the centre of US land drilling, RigData reports that there are currently 678 active rigs – split between Helmerich & Payne (160), Patterson-UTI (85), Nabors (64), Precision Drilling (39) and 77 other drillers (330).

Most new onshore rigs, both drilling and work over rigs, are built by OEMs in China. In the US, the larger vertically integrated land drillers have in-house manufacturing operations, so they will outsource some equipment construction, but assemble the new rigs at their own facilities. The leading provider of US newbuild rigs is National Oilwell Varco.

The secondary market, where existing rigs are sold, is largely auction dominated with mostly older rigs changing hands. As a rule, the big land drillers do not sell their newbuild rigs, as each has their own flagship designs.

The 844 TD-HD Workover Rig by Franks has a 3/4″ Tubing Line, Air Clutches and is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.  The 844 TD-HD Workover Rig is in excellent working condition, has a current OK Tag and clean Title.

Franks 844 TD-HT draw works with   3/4″ Tubing Line. New Air Clutches have been added to the draw works and it is powered by a Detroit Diesel 6V71 Motor & Allison CLT 4460 transmission.

Performance proven main drum draw works assemblies are modular construction for versatile rig assembly. Designed to allow maximum parts interchangeability and easy add-on features to customize this for your specific operation.

Includes tubing tongs, elevators,  McKissick block and basic tools.  Unit is in excellent working condition, has a current Oklahoma Registration Tag and clean Title.

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Built 2012, 42 x 12 drawworks, Cat C15 (475 hp) engine,  112’ x 300,000# derrick, mounted on 5 axle carrier.  Includes skid mounted Gardner Denver PAH mud pump with Detroit 8V92 engine (gear end is good, but needs fluid ends machined or replaced).  Package Price:  $270,000

Built 2005, 104’ x 225,000# telescopic double free-standing mast, 42” x 10” drawworks, 38” x 8” sandline, Detroit Series 60 engine, Allision 5860 transmission, mounted on 5 axle carrier tandem steer/tri-drive, Level IV completed in 2014 (16,270 CAODC mast hours remaining)  Price:  $755,000 CDN (approx. $600,000 USD)

Built 1981, mounted on 5 axle carrier, Detroit 60 Series engine, 104’ x 250,000# mast, 5860 Allison 6 speed transmission, 100-ton McKissick spring loaded blocks, 2 winches, blocks, all lines, drill line, approx. 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all with current tags, currently working, excellent condition  Price:  $320,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Built 2010, Detroit 60 Series engine, 5860 Allison transmission, 103’ x 250,000# mast, double triple, 2 winches, McKissick 100-ton spring loaded blocks, all lines, drill line, approx 13,000’ of 9/16” sandline, all guy lines, load lines, belly lines, floor lines and 2 winch lines all current tags.  Excellent condition, currently working.  Price:  $420,000

Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working  Price:  $270,000

Manufactured 1981, 400 CCC drawworks, single 22” Hydromatic, 96’ x 215,000# CCC derrick (level 4 inspected 2015), mounted on 5 axle carrier, Detroit 60 Series 14 liter engine, Allison 5860-2 drop box,  1 winch, work floor, McKissick 83 block, 72” links, BJ RS tubing tong with manual backup, pad type weight indicator, 2 7/8 – 2-3/8 100 ton, 14,000’ 9/16 sandline capacity, 875’ 1” drill line,   Price:  $395,000

Rebuilt 2010 to Level IV, Double drum drawworks, Detroit 6V53 diesel engine, Allison 5860 3-speed transmission, 60’ x 100,000# stiff mast derrick, 4 lines with 4’ well spacing, 35-ton McKissick block and hook (2) 17” sheaves 7/8” wire, 75-ton elevator bails with 25-ton elevator pickup adapter, working floor, stairs, handrails, lights, 20’ lubricator, 5000 winch with hook, tandem axle single steer drive carrier, located Canada  Price:  $120,000 USD

Manufactured 2008, 72’ x 150,000# derrick, Detroit Series 60 engine, mounted on 4 axle Crane Carrier, tooled out, Guiberson T60 air slips 100 ton casing blocks, Westco power tongs, currently working   Price:  $445,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Rebuilt 2010, double/triple, 8V92 Detroit with Turbo charger and after cooler, trailer mounted, single drum drawworks, Allison transmission 588 Series, 102’ x 225,000# derrick, gooseneck 3 axle trailer

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

Manufactured 2009, 96" x 205,000# derrick, TI 260 drawworks, 48" sandrum brake, 9/16" sandline, 1" Lebus grooved tubing drum, 60" turbing drum brake size, 41,500# max single line pull Price:  $425,000 PRICE REDUCED: $389,500

FRANKS 500 WORKOVER RIG(Ref#7615Tc)  Built 1980, refurbished 2018, 102’ derrick, 150 ton blocks, 15,000’ sandline, new engine and transmission, ready to work  Price:  $430,000

FRANKS 400 WORKOVER RIG(Ref#7615Ta)  Built 1979, refurbished 2017, 102’ x 215,000# derrick, 100 ton blocks, 15,000’ sandline, 4 lines  Price:  $390,000

Built 1981, refurbished in 2018, 102’ derrick, new drilling line, no sand line, 100 ton blocks, 2 winches, has not worked since refurbishment.  Price:  $390,000

Manufactured 1982, 1287/160 DDHT, 96" x 215,000 hook load inspected mast, 122" hydromatic, Detroit 60 series engine (7500 hours), 750 5 speed Allison transmission, mounted on 4 axle carrier, 2 winches, work floor  Price:  $325,000

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Manufactured 1980, (2) Cat C13 engines, Allison transmission on 6 axle carrier, 108" x 300,000# mast with mast lights, single 2042 drum drawworks with water cooled brake, 2 hydrraulic winches  Price:  $170,000

Double drum Wilson Sr and Wilson JR drawworks, sandline capacity 10000" of 3/16", mounted on tandem axle, 1987 Freightliner tandem axle truck powered by Detroit diesel engine, 2 hydraulic leveling jacks, Detroit diesel on deck, 50" hydraulically raised mast, brand new hydraulic cylinder just replaced for lifting derrick, has pulled a minimum of 3000" wells, all new hydraulics   PRICE:  $137,500

Manufactured 1979, double drum drawworks, Lebrus grooved for 1-1/8" drill line swedged to 1", 9/16" sandlne, Totco 190,000# weight indicator, air clutches, Parmac single hydromatic brake, hydraulic and pneumatic controls, Wilson 96" x 180,000# mast hydraulically raised and scoped, 3-stage raising ram, crown safety platform, double tubing board, triple rod board, ladder, guylines, adjustable working platform.  Wilson tandem axle front, tri axle rear carrier with Detroit Series 60 diesel engine, electric start, radiator, gauges, Allison automatic transmission, air compressor, hydraulic pump, single man cab, Braden hydraulic winch, hyd reservoir, water tank, 4 hyd levleing ajcks, folding walkways, safety rails, toolboxes, McKissick 100 ton block, 84"L elevators, Foster hyd tubing tongs, Gill rod tongs, Cavins Type C tubing slips, 2-7/8" tubing elevators, 2-3/8 tubing elevators, rod elevators  Price:  $245,000

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Manufactured 1981, Double drum, 96" x 180,000# mast, drawworks brakes and swab brakes both converted to new style brake system, Detroit 60 Series with Allison 5860 tranmsision, 16" double hydromatic brake, 1-1/8" hammered drill line, 9/16" swab line, (2) 6" balls, (5) anchors, 2-1/2" wash pipe with 2" kelly hoist, Oil Country 5500 open face tongues for up to 5-1/2", good tires, mounted on 5 axle carrier  Price:$289,500

WILSON SUPER 38(Ref#3307R)  Double drum drawworks, friction clutches, Foster makeup and breakout catheads, Cummins 250 disel engine, Spicer 4 speed transmission, 70’ cantilever mast, 4-sheave crown block, racking board, mounted on 8’W x 22’L tandem axle trailer with folding walkways, mast base, 4 manual jacks, Budd wheels, National Ideal 75 ton 3-sheave block with hook, Price:  $45,000

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

42 x 10 – 38 x 8 drawworks, 96’ x 215,000# telescoping mast hydraulically raised and scoped, 60 Series Detroit diesel engine (515 hp), CLBT 4460 Allison transmission, mounted on 4 axle carrier, 4 hyd leveling jacks, 2 hyd utility hoist, new rear axles with new tires, flotation front tires  Price:  $195,000

Detroit 8V-92 Diesel Eng, Allison 750 Trans, 42X12-38x8 drawworks w/dual disc assist, 97" 200,000# telescoping mast hydraulically raised & scoped, Mtd on 4-Axle Carrier w/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, tong rack & Floatation Front Tires  Price:  $220,000

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

95’ x 212,000# Ideco telescoping derrick, 42 x 10 double drum drawworks, 100 ton McKissick block and hook, hydromatic, tubing board, monkey board, catwalks, railings, stairs, lights, ladders, mounted on 4 axle carrier, Detroit 8V71 diesel engine, Alliston CLT 5860-DB automatic transmission  Price:$137,500

69’ x 140,000# striff mast, 32 x 7 double drum drawworks, 2 aux deck winches, mounted on 4 axle carrier, Detroit 6V71 diesel engine, Allison HT750 automatic transmission, tubing board, rod basket, cat walks, railings, stairs, ladders, lights, floor, BOP controls, accumulator bottles, 6 sheave crown, 75 ton McKissick tubing block  Price:$105,000

104’ x 225,000# telescoping double derrick, 42 x 10 double drum drawworks, hydromatic, 100 ton McKissick block and hook, mounted on tandem steer/tandem drive carrier, Cat 3406T diesel engine, Allison CLBT-5860-2 automatic transmission  Price:$137,500

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

72’ x 140,000# hook load telescoping mast, single tubing, double rods, self guyed, 36” x 8” double drum drawworks, Detroit Series 60 engine, Allison 6750 transmission, Level IV in 2005  Price:  $490,000 CDN  (approx. $390,000 USD)

Built 1966, Double drum 1058 drawworks, 8500’ sandline, blocks, 96’ x 150,000# derrick, mounted on 4 axle carrier, Detroit 6V92T replaced August 2019, PTO, power steering and alternator/generator needs modifications to work with new Turbo diesel engine

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96" x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work  Price:  $94,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

Refurbished, ready to work, 10 x 8 pole hydraulically raised and scoped, Cat 3208 deck engine, auto transmission, hydraulic swamp winch with all new cable on all winches, 8” brakes with new brake bands, air clutches, hydraulic lines for tongs and air lines for slips, hydraulic jacks, mounted on 1982 Ford 8000 truck with Cat 3208, no tools.  Price:  $59,500

Double drum, double pole 8-5/8" x 7 x65", 6,000" of 2-7/8" line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, will do 6000" of 7" tubing, currently working    Price:  $89,500

Double drum, 70" pole, 4000" of new line, new power tongs, mud pump, power swivel, new 8.3L Cummins deck engine, mounted on 1979 Mack superliner with 400 Cummins engine, 13 sp transmission, completely tooled, 10 new bits, 4 drill collars, ready to work  Price:  $170,000

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Built 1966, Double drum 1058 drawworks, sandline has 5/8” line, 75 ton blocks on tubing drum, 10 x 13 single pole, 6V471 Detroit engine, standard transmission, 3 axle carrier, good tires, misc parts and accessories including chains, seals, old style oiler, sitting since 2016, running when parked, includes spare parts.   Price:  $47,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

350 GM deck engine, mounted on 1986 GMCtruck, 454 GM engine, sandline, approx 50" mast, no cathead, can pull single, ready to work  PRICE REDUCED: $29,500

We are a parts supplier for all major brands of well servicing rigs and equipment. We are an authorized distributor of quality oilfield brands such as Crosby, WPT, Kobelt, Parker and Oil Country, to name a few. With a full machine shop and fabrication capabilities, we can make hard to find parts that keep older equipment in service.

We have 6 Nos. of Mobile Work over Rigs with a capacity of 30 Tons. The following Job can be done: Setting of packer, Releasing of packer, Testing of casing, Bysetting of R3 packer, Testing of Tubing, Abandon of well by putting Cementing plug, Testing of plug, Installation of SRP, Testing of SRP, Clearing of well bore with withread more...

workover rigs without guyline are designed for small-scale and fast workover operations. Since it is not necessary to install external windload guylines, operating efficiency is greatly enhanced. They can work at 60 kn of wind in adjustment mode, and 35 kn of wind in operating mode, and are suitable for shallow wells in variousread more...

- "Service Work" consists of using a rig to pull down hole pumps, rods, and tubing from the wellbore. Other service including cleaning and swabbing a method used to remove fluid from the well bore. Well depths range from several hundred feet to 10, 000 feet belowread more...

We are one of the leading service provider for Coring, Air Drilling, Workover and Drilling Rig Services to various Oil and Gas Companies in India. Our strength is in providing complete Rig Package with all associated equipment and services to onshore Oil and Gas Industry. We currently hold wide range of Onshore Workover Rigsread more...

We are one of the leading service provider for Coring, Air Drilling, Workover and Drilling Rig Services to various Oil and Gas Companies in India. Our strength is in providing complete Rig Package with all associated equipment and services to onshore Oil and Gas Industry. We currently hold wide range of Onshore Workover Rigsread more...

The SKA is manned by a set of highly experienced global crew (India, Australia, United Kingdom, Brazil, Azerbaijan, South Africa etc) who bring significant knowledge, expertise and diversity to the rig. We continually maintain and develop an extensive network of people associated with this industry. Our long-term associationread more...

With an internationally experienced crew of drillers and technicians credited with completing complicated drilling programs in difficult and diverse terrain, Punj Lloyd Upstream has a fleet of brand new AC VFD 1500HP and 2000HP onshore rigs with a drilling capacity of 6, 000 m.

We have successfully executed numerous contracts for operation and maintenance of client owned Work Over Rigs. Amongst other esteemed contractors, we have emerged as winners in the field of Safety, Best Performance, etc. Our trained technical manpower is vigilant and extremely careful with handling the equipment. For over 15read more...

JKGIT has developed strategic tie ups with rig manufacturers in China. As a team we can manage the sourcing of various rigs and their components in a cost effective manner and serve the ever growing market of Oil & gas industry in India. We are dedicated to provide a high quality oilfield products and services forread more...

The quantum of work successfully completed in itself is testament to their abilities. SKA"s team holds the record for drilling the deepest corehole all over the world.

Dragon manufactures a full line of 300 to 1,000 HP Cooper ™ Rigs at our state-of-the-art U.S. facility and our rig team is one of the most seasoned in the industry. Whether you need a used well servicing rig, a workover rig, a drilling rig, mud pumps and systems or parts and service, Dragon has you covered.

Our expansive inventory of parts and accessories includes mud systems, mud hoppers and mud guns, agitators, pipe racks, draw works, API 4F, 4th Edition certified masts, break blocks, McKissick tubing and drilling blocks and refurbished gear boxes for most brands of well servicing units. Our rig masts have a clearance height range of 71-124′ and capacities of 150,000 lbs too 500,000 lbs.

Like all Dragon equipment our used Cooper Workover Rigs are severed duty engineered. We also have hands-on experience building to severe, cold weather specs and in compliance with the state of California’s requirements. When you buy a Cooper™ Rig from Dragon you get a custom, easy to operate, safe rig at a competitive price. Whatever mobile rig solution you need, Dragon will build it, deliver it and back it with the highest level of service and support in the industry.

About products and suppliers:Alibaba.com offers 40 750hp workover rig products. About 85% % of these are oilfield drilling rig, 12%% are mine drilling rig.

A wide variety of 750hp workover rig options are available to you, You can also choose from oil well, 750hp workover rig,As well as from energy & mining, manufacturing plant, and machinery repair shops. And whether 750hp workover rig is 5 years, {2}, or {3}.