canadian tire power tools made in china

Walter Meier AG is the company that produced the majority of the power tools sold by Canadian Tire. It includes the Mastercraft brand as well as their Mastercraft Maximum brand, and their JobMate brand. Mastercraft is the name used by stores for hardware products sold by Canadian Tire. Canadian chain of stores Canadian Tire. The brand is split into two lines: the home Mastercraft series as well as professionals Mastercraft Maximum series. Six subcategories are used to classify the products given. Stationary Power Tools, Handheld Power Tools, Hand Tools, Tools, Air Tools, Tool/Garage Organization, as well as other Hardware items, are included in the subcategories.

Maximum is generally more durable. This “Maximum” name has replaced the previous “Professional” name as the CT’s top line of tools, even though since the introduction of Maximum things have slowed down slightly (but you could say that for many tools generally Mastercraft/CT as well).

Your Mastercraft tools are covered against any defect in material or workmanship. This is why they are covered by an unconditional warranty for life. If in the event of a failure, you’re Mastercraft(r) product is damaged by normal use you must provide your receipt of purchase along with the product that is defective for an inspection and the item will be repaired free of cost with every Builders Express, Builders Warehouse or Makro retailer.

Husky and Mastercraft Tools are both excellent brands however, ensure you buy “less fancy” top-quality tools at the time they are available. Buying the right tools will help you save time and effort.

MAXIMUM 5 Drawer tool Chest is the perfect storage solution for tools, tools, materials, and other equipment. The cabinet has a 32″ (81.2 cm) wide body that has fully-length sliding drawers. Gas struts are incorporated into the lid for quick opening and closing. Durable and reliable for both DIY’ers and professionals. The latch is adjustable for all drawers. Drawer capacity: 120 lbs (54.4 kg). It is compatible with the MAXIMUM six-drawer Tool Cabinet.

Mastercraft tools are still superb, but the firm has declined. Canadian Tire’s Professional brand was the best-selling tool line until Maximum replaced it. Consequently, most tools have lost quality and that authenticity.).

Even though Menards, Inc. owns the trademark, the corporation does not actually manufacture the tools itself. Instead, they outsource out that portion of the work to tool manufacturers. All Master force hand tools like wrenches, ratchets, screwdrivers, sockets, and other similar items are manufactured in the United States. A lifetime guarantee is provided on all master force hand tools, regardless of circumstances.

The company’s initial name was Performance Products, Inc., which was subsequently changed to Performax Products Corp. In 1999, Jet purchased the business, which was then included in the WMH Tool Group, which was formed in 2002. Several well-known names in this category include Performax, Jet, Powermatic, and Wilton, to name just a few.

Furthermore, who manufactures the masterforce tools available at Menards? The Apex-made master force hand tools, as well as the Pratt-read-made screwdrivers included in the master force tools, are among the finest in the industry, according to the company. When it comes to selling master force tools, Menards is the favorite big-box hardware merchant among large-scale hardware retailers.

Begin with Matco Tools, a manufacturer, and distributor of automotive-specific tools, parts storage systems, and toolboxes. In the United States, the state of Ohio is home to their corporate headquarters, where they began their operation. Incorporated in New York City, Danaher Corporation is a Fortune 500 company. Matco is a subsidiary of this company.

Founded in 1946, they have since 1979 been selling their tools and equipment to professionals and enthusiasts, and people who put a high value on the best tool quality.

The Stanley Black & Decker Craftsman product line includes various tools, lawn and garden equipment, and clothes. Sears used to own the Stanley Black & Decker brand, which is now owned by Stanley Black & Decker.

Kobalt is the brand name for a collection of hand and mechanics’ tools and power tools and tool storage solutions owned by the American home improvement store Lowe’s.

A maximum reduction in noise and a three-times longer motor life is expected from this new design. With its powerful induction motor, this compressor can handle a broad variety of tasks, from final touches on a project to inflating tires.

Positec developed Worx and Rockwell in the 1990s when Black & Decker began manufacturing tools in Suzhou, China. During this period, Positec also produced Black & Decker products in its Chinese manufacturing sites. Positec grew up in this town and was born and reared there.

No, Since the Ridge Tool Company manufactures Ridgid tools in Elyria, Ohio, and consequently, they are totally made in this country, they are known as “Made in the USA” tools.

In addition to being based in the United States, Ridgid Tool Company and Milwaukee Electric Tool Company both manufacture high-quality tools aimed at both serious do-it-yourselfers and professional tradesmen. Each of them is also intertwined with the others in some manner as subsidiaries.

Chang Type Industrial Co. Ltd., a Taiwanese firm with its headquarters in Taipei, bought the Deltatools brand earlier this year for an undisclosed sum.

This week"s CT flyer has the "newer" 90T ratchets packaged together in a promo set of the 1/4", 3/8", and 1/2" for $50 CDN. For anyone wondering, the Maximum line is their "premium" house brand tools. The hand tools come with a lifetime warranty. The quality of these tools is usually pretty decent - nowhere near tool truck level, but a step above your standard home owner grade tools.

Fedwrench and some others also noted these look like twins of the new GearWrench 90T ratchets. From what I"ve compared that does seem to be the case, and Canadian Tire shares other tools with GearWrench.

So today I went and collected all the tools I"ll need to finish installing a few new things I"ve ordered for my Tacoma. I had a few hundred dollars in Crappy Tire gift certificates from our safety incentive program at work so I figured I"d pick up a few things. I ended up buying close to $500 dollars worth of tools (non sale prices). The thing is, by the budget I had, I should of spent over $1000. Everything I bought either has lifetime warranty or is the same brand I wanted anyways so it"s not like I cheaped out. How does Canadian Tire afford to sell stuff with so much less margin?

Every tool I wanted this time around was marked down at least 30% and often was at least that much cheaper than the same tool at another store. Somethings were closer to 50% cheaper than a NAPA, Westward, or other high end equivalent but the warranty is there so who cares if I snap one in 5 years. Canadian Tire will cover it. I"m not going to say the tools I bought are as good as the Snap On stuff we have at work but I don"t really need Snap On tools anyways for working on my truck a few times a year.

I also realise I got lucky. Sometimes I"ve walked through Canadian Tire and found nothing I wanted on sale. This time though a very good 3-ton mastercraft service jack, 3 ton double latch jack stands, a good dial torque wrench with lifetime calibration warranty for $10 extra, and a 300 + something socket set with all the fixings from Stanely"s new pro line (with, again, lifetime warranty and in powder coat black over crome) came out to just over $250. Everything I wanted was on sale by a large margin. How can they afford that? I think from now on I"m just going to pay closer attention to Crappy Tire when I need tools and buy them when they have these ridiculous sales.

Ever wonder who owns Craftsman tools? How about Milwaukee, Mac Tools, or Skilsaw? It may surprise you to know that only a handful of power tool companies own your favorite tools. That’s right, most tool brands fall under a parent company that also controls additional power tool manufacturers and brands. We break it down for you…with charts!

Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. The company owns many brands, however. Dating back to 1843 with a man named Frederick Stanley, the company quickly formed its roots. In 2010, it merged with another company that started in 1910—Black and Decker. As of 2017, the company maintains a $7.5 billion business in tools & storage alone. SBD brands include:

As it turns out, TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID* and RYOBI names for cordless power tools (Emerson owns RIDGID). TTI stands for Techtronic Industries Company Limited (TTI Group). Founded in 1985 in Hong Kong, TTI sells tools all over the world and employs over 22,000 people. TTI is listed on the Hong Kong Stock Exchange and had worldwide annual sales of over US$6 billion in 2017. Their brands include:

Not anymore. In 2017, Chervon acquired Skil Power Tool Brands from Bosch. This added two big brands to their portfolio: Skilsaw and Skil. Chervon started its power tools business unit back in 1993, launching the EGO brand of cordless outdoor power equipment in 2013. In 2018, the company rebranded Skil (including the logo) and announced new 12V and 20V cordless power tools. Today, Chervon tools and products are sold by more than 30,000 stores in 65 countries. Chervon manufactures the following brands:

First off, Bosch Tools only represents part of the Bosch Group which includes Robert Bosch GmbH and over 350 subsidiaries across 60+ countries. In 2003 Robert Bosch GmbH combined its North American power tool and power tool accessory divisions into one organization, forming Robert Bosch Tool Corporation in North America. The company designs, manufactures, and sells power tools, rotary and oscillating tools, power tool accessories, laser and optical leveling devices, and range finding tools all over the globe. Bosch also manufactures the following tools:

Husqvarna Group manufactures chainsaws, trimmers, robotic lawn mowers, and ride-on lawnmowers. The Group also makes garden watering products as well as cutting equipment and diamond tools for the construction and stone industries. They have a presence in more than 100 countries and employ over 13,000 people in 40 countries. Husqvarna Group also owns the following tools:

JPW owns several large brands including Jet, Powermatic, and Wilton. The company has its headquarters in La Vergne, Tennessee but also has operations in Switzerland, Germany, Russia, France, Taiwan, and China. They sell products in 20 countries throughout the world. Their tool brands include:

Apex Tool Group has its headquarters in Sparks, Maryland, USA and employs more than 8,000 workers. They operate in more than 30 countries throughout North and South America, Europe, Australia, and Asia. Annual revenues exceed $1.4 billion on the sale of hand tools, power tools, and electronics tools for the industrial, automotive, aerospace, and construction/DIY markets. The following tool manufacturers belong to APEX Tool Group:

Headquartered in St. Louis, Missouri (USA), Emerson controls power tool manufacturers and products in the industrial, commercial, and residential markets. While TTI licenses the RIDGID name for power tools, Emerson controls the following tools (among others):

Based in Wendlingen, Germany, TTS or Tooltechnic Systems owns Festool (electric and pneumatic tools), Tanos (not to be confused with the guy who destroyed half the universe), Narex, Sawstop, and now Shaper Tools. TTS is truly behind the scenes as it doesn’t really have appear to have its own website (at least not in the US) or an official logo. In bullet point format, its subsidiaries include:

Yamabiko Corporation started in 2008 and has three core business segments: outdoor power equipment, agricultural machinery, and industrial machinery. Based in Japan, Yamabiko is a global company with major markets in Japan and North America, and a growing presence in Europe and Asia. Tool brands include:

Founded over 100 years ago, ITW manufactures specialized industrial equipment, power tools, hand tools, and consumables. ITW operates in 57 countries with over 50,000 employees. They also have more than 17,000 granted and pending patents. ITW brands include:

Who makes Harbor Freight Power Tools remains a mystery—possibly because they may have switched suppliers in the past. Some have suggested LuTool, a company established in June 1999 supplies their power tools. LuTool has headquarters in Ningbo, China, and a North American office in Ontario, Canada. LuTool is owned by Gemay (Ningbo Gemay Industry Co Ltd) which also has its headquarters in Ningbo, China.

Not to be outdone, others have suggested Powerplus as the manufacturer behind the Drill Master, Warrior, Bauer, and Hercules lines of tools. Powerplus is a division of European company Varo with headquarters in Belgium.

Hilti and Makita are just Hilti and Makita. Hilti doesn’t have any subsidiary companies underneath them or a parent company over them. Makita, on the other hand, did acquire the Dolmar brand, bolstering its already-impressive line of outdoor power equipment tools. It’s pretty impressive the market share each of these companies enjoys!

We can’t leave out the popular house brands available at those big-box retailers and home improvement warehouses. Note that many (if not all) of the brands below represent ODM or OEM solutions. That means the tools get specified by the store but executed by another manufacturer. In other scenarios, tools are “offered” to a retailer and then manufactured in bulk upon acceptance of a buyer’s order.

While you may have thought you knew who owned all those power tool manufacturers, consolidation has changed the playing field. By far, Stanley Black & Decker demonstrates the largest buyout pattern. Companies like TTI, Apex Tool Group, ITW, and others also enjoy adding to their numbers.

In 2020, the market volume of power tools in Canada was estimated to amount to about 11.7 million units. This was the highest market volume reported between 2015 and 2020. The market volume is expected to continue increasing by 2027.Read moreMarket volume of power tools in Canada from 2015 to 2027(in million units)CharacteristicVolume in million units--

China Market Monitor. (February 28, 2021). Market volume of power tools in Canada from 2015 to 2027 (in million units) [Graph]. In Statista. Retrieved October 04, 2022, from https://www.statista.com/statistics/1229657/market-volume-power-tools-canada/

China Market Monitor. "Market volume of power tools in Canada from 2015 to 2027 (in million units)." Chart. February 28, 2021. Statista. Accessed October 04, 2022. https://www.statista.com/statistics/1229657/market-volume-power-tools-canada/

China Market Monitor. (2021). Market volume of power tools in Canada from 2015 to 2027 (in million units). Statista. Statista Inc.. Accessed: October 04, 2022. https://www.statista.com/statistics/1229657/market-volume-power-tools-canada/

China Market Monitor. "Market Volume of Power Tools in Canada from 2015 to 2027 (in Million Units)." Statista, Statista Inc., 28 Feb 2021, https://www.statista.com/statistics/1229657/market-volume-power-tools-canada/

China Market Monitor, Market volume of power tools in Canada from 2015 to 2027 (in million units) Statista, https://www.statista.com/statistics/1229657/market-volume-power-tools-canada/ (last visited October 04, 2022)

Good quality hand tools have not disappeared, but there are few to be found at your local hardware store or building supply outlet. For generations smooth planes, block planes, spoke shaves and hand saws have been  stock items waiting for the beginning boatbuilder or home handyman to purchase them to start his kit of tools. Once purchased, they conveyed to the new owner the potential of future projects waiting only for his growing expertise to unlock the promise of creativity that is in any good tool.

That promise has been broken and with few exceptions the basic hand woodworking tools listed above have disappeared from local outlets or been replaced by cheap imitations of these products which work poorly or not at all..

I called the Canadian Tire Corporation which had sold this tool under the Mastercraft label. They told me that the plane was manufactured by Footprint Tools, a company known in the past for making good tools. The president of Footprint told me with some frustration in his voice that Canadian Tire had demanded that the plane be sold to them for under $30 wholesale or they would take their business elsewhere. The only way Footprint could meet this price was to cut corners in manufacture. A further call to the head buyer for Canadian Tire produced the angry response that their stores sold only top quality tools.

On a recent visit to a Home Depot store I picked up a Buck Brothers hand saw. Buck Brothers is a firm with a history of quality.  If you find their antler logo stamped on an old chisel at a yard sale you can be sure that is a good buy. But the new saw I had in my hands was bent, its teeth had flats where points should have been, and the handle was rough and uncomfortable. No one could have used that saw to cut wood.  I was able to speak with  Buck Brothers president who was fully aware of the problem and seemed distressed by it. He told me that the Buck Brothers name had been bought by Great Neck Tools, a large manufacturer of “economy” tools. The saw I had been looking at, even though it carried the Buck Brothers name, was not made by them and they had no control over its quality.

Examples of the demise of these basic hand woodworking tools are many. Miller’s Falls has disappeared.  Record Tools was bought by Rubbermaid and has stopped production. Someone has bought Record’s name and is hoping to start again making some tools in India and some in China.  Stanley still carries a few planes made in England but the quality is variable. Students recently showed me a new Stanley spoke shave with warped blade and a block plane with its blade seat machined poorly, both preventing the tools from working.

Why has this come to pass? Partly it is the fault of our economic system which values profit above quality. Big companies buy little companies and make them more “efficient” by dropping some items and cheapening others. Power tools have played a big part in the demise of hand tools. The professional house carpenter once used hand saws extensively. He had a set of molding planes for sash and trim work and maintained a set of sharp chisels. Today, the pieces making up a house come pre-shaped and need only to  be cut to length with a Skill Saw (interesting name) or chop saw. Cabinet work is machine made by specialists.  Many professionals carry only a block plane (if any plane at all), and  perhaps an old beater of a chisel. Stationary sanders do much shaping that was formerly done by planes and spokeshaves, and the router does everything else. In most catalogs there are more pages devoted to router bits than any other type of tool. Routers have replaced draw knives, spoke shaves, rabbet planes, plow planes, molding planes, chisels, and carving tools.

Given the above it is no wonder that hardware stores have such a poor selection of hand tools. The proprietor of a building supply store in Calais, Maine told me he could special order a smooth plane but he did not stock them as “there were few fine craftsmen in the area” and he might only sell one plane a year. A generation ago he would have stocked two grades of Stanley smooth plane. Even the lower priced “Handyman”  was a good tool and most households had them.

Why do we work so hard to eliminate hand tools from our work? We use the power tool wherever we can and pick up the hand tool if we must. The professional house carpenter is trapped in a box where time equals money. If his competition gets an air nailer and eliminates enough labor to underbid him, then he must get an air nailer or find a client who will pay extra for hand work. But the amateur craftsman is not in this bind. He may tell himself that he cannot afford the time to “do it by hand” but he will miss the essence of the game. Hand tools are quieter, they make less dust, and they allow a more intimate connection between the brain, the tool, and the wood itself.

The quality of the surface left by hand tools is fundamentally different from that left by power tools. Years ago I worked for a well known yacht builder. On new construction the foreman’s rule was that we should sand until the machine marks disappeared. I still follow that rule and have come to realize that it is not the smoothing of the surface that is important, but it is the creation of a new surface made by human hands. A few missed hand tool marks made by a smooth plane, or the figure of the wood subtly showing through the paint, although not left on purpose, can add to the appeal of a project. The precise repetitive hint of surface planer marks leave a colder, less inviting surface that can be felt even from a distance.

Fortunately, some woodworking arts, boatbuilding among them, include a number of operations that are most efficiently accomplished  with hand tools. So while very little hand tool work is done in a modern cabinet maker’s shop, a visit to a shop where wooden boats are built confirms the continuing value of hand planes, spoke shaves and saws. There are now enough craftsmen building wooden boats for a living or for their own enjoyment along with others who work wood by hand, to begin to change the bleak outlook regarding hand tool availability. While it may be a long time before the chain hardware stores and building supply outlets carry good tools again, there are some new sources of excellent tools.

Lie-Neilsen , and Lee Valley (Veritas)  are makers of excellent new planes. About the only complaint I have heard about these tools is their price. While most of us will have to think long and hard about spending over $200.for a smooth plane, it is worth thinking about why the price seems high. The few planes that are still offered in local hardware stores show only too obviously the steps taken to hold the line on price. Castings are rough, pieces fit poorly, adjusters are sloppy, and chrome masquerades as quality finish. If the integrity of these mass produced tools had been maintained over the years their price would be much closer to Lie Neilsen and Veritas.  When you buy one of these new quality tools you are paying a worker who is proud of the work he does and cares about the work that you do. That is worth a great deal.

At the present time you can still buy a professional model Stanley block plane. It offers decent quality at a modest price. Stanley still makes bench planes. Their professional smoother works well but has lost the sweet feel that inspires loving care. It comes with plastic handles, admittedly comfortable, but why would a craftsman who knows the value of the feel of warmth and texture in his products chose to hold onto a chunk of plastic if he could have wood?  I recently talked to a customer representative at the Stanley headquarters. He told me that the man now in charge of hand tools was a woodworker and hoped to turn the present situation around, making some of the older tools available again. There is hope.

E.F. Schumacher in Small is Beautiful says that “The type of work which modern technology is most successful in eliminating is skillful, productive work of human hands, in touch with real materials of one kind or another." I believe that this is true and that the best way to stop this trend is to support the use of quality hand tools.

Mastercraft is the Canadian Tire exclusive hardware line of products. It is broken down into two lines: Mastercraft, which is the household series, and Mastercraft Maximum (formerly the Mastercraft Professional Series), which is the new professional series. The new Maximum Series tools are also designed only for home use, since the use of these tools in a professional environment voids the warranty. Warranties on lifetime guarantee products such as screwdrivers, socket sets, etc., are often honored without proof of purchase. Warranties with time limits such as those for power tools from Mastercraft or Mastercraft Maximum (often 3 and 5 years respectively) will only be honored with a proof of purchase.

The items that are carried are classified in six categories, Stationary Power Tools, Handheld Power Tools, Hand Tools, Air Tools, Tool/Garage Storage, and Other Hardware accessories.

These Include: 12V, 14.4V, and 18V cordless drills, 5A and 8A hammer drills, cordless 3K0 impact gun, reciprocating saws, circular saws, spin saws, rotary saws, angle grinders, electric stapler/nailers, cordless screwdrivers, chainsaws,sanders etc. The latest additions to the portfolio are powered by 10.8v Lithium-Ion batteries.

These include: tape measures, sockets, ratchets, wrenches,squeeze tools( pliers, visegrips), screwdrivers, hammers, prybars, axes, handsaws, chisels,staple guns, hand sanders, gear wrenches, levels, chalk line, etc.

In general, all hand tools are warrantied for their entire lifetime. For example, if one breaks (under normal use) a socket or torque wrench fails, Canadian Tire will replace it. There are some exceptions to the warranty. For instance, when it comes to tape measures only the shell is warranted and not the tape itself.

Bondhus · Bradford Tool Industries · Buck Bros. · Channellock · Cooper Hand Tools (Crescent, Lufkin, Xcelite) · Cornwell Tools · Danaher Corporation (Allen, Armstrong Tools, Easco Hand Tools, GearWrench, K-D Tools, Matco Tools) · Digitool Solutions · Disston Saw Works · Eklind · Emerson (Ridgid) · Empire Level · Estwing · Felo · FEW · Fiskars (Gerber) · Gardner Bender · Gedore · Gray Tools · Hazet · Heyco · Ideal Industries (Pratt-Read, SK Hand Tools, Western Forge) · Klein Tools · Knipex · KUKKO · Leatherman · Lie-Nielsen Toolworks · Lisle Corporation · Newell Rubbermaid (Irwin, Lenox) · Park Tool · PB Swiss · Saltus · Sandvik · Snap-on (Bahco, CDI Torque Products, J.H. Williams Tool Group) · Stahlwille · Stanley Black & Decker (Blackhawk, Bostitch, Facom, Mac Tools, Proto, Sidchrome, Stanley Hand Tools) · Textron (Greenlee, Klauke, Paladin Tools) · Techtronic Industries (Milwaukee) · Thorsen Manufacturing · Tomé Fèteira · Toptul · Vaughan · Victorinox (Wenger) · Wera Tools · Wescott · Wiha Tools · Witte Tools · Wright Tool

But recently, there are reports of refusals to exchange defective tools, sometimes because the customer didn"t keep the receipt for decades (even if it is a brand sold only at Canadian Tire, such as their store-brand MasterCraft tools).

As a bonus, you can also pick up all the tools you need to install your recently-acquired parts on-site. Canadian Tire has its own house brand tools under several lines depending on your budget. There’s Mastercraft if you’re Jesse F. Keeler, and MAXIMUM in all-caps if you’re a fully-fledged ASE-certified master lube tech. I’m kidding, the Mastercraft and MAXIMUM tools are pretty good stuff, often sold for a substantial discount and generally tough enough to last for generations.

Consolidated retail sales increased 5.5 percent to C$3.98 billion in the quarter, helped by strong demand for casual clothing, sports footwear, outdoor tools and automotive accessories.