old hydraulic pump in stock

The capacity of a pump is defined by the amount of fluid passing through the unit rated in GPM (Gallons per Minute), and the discharge pressure rated at Head Feet. The head is the height of the column of fluid that the pump can push.

Types of pumps:Centrifugal pumps - the most widely used pumps in processing plants are Centrifugal pumps. They consist of an impellor rotating within a casing

Reciprocating pumps – positive displacement pumps that have a higher efficiency than centrifugal pumps. The classes of reciprocating pumps include piston pumps, plunger pumps, and diaphragm pumps.

Rotary pumps - In rotary pumps mechanical displacement of the liquid is produced by rotation of one or more members within a stationary housing. This type of pump includes gear pumps that have two impellors in a housing for thicker liquids, Moyno pumps which are progressive cavity pumps, and screw pumps.

Vacuum pumps - designed to pull vacuum. Water seal vacuum pumps (Nash, Kinney, SiHi) use water to create suction. These produce some vacuum with higher CFM flow.

Our used core supply gives us the ability to offer rebuilt, tested products and ship them usually the same day your system goes down. We stock cores for all major hydraulic component manufacturers and also a large number of obsolete products.

Here at Hydraulex Global, we have a dedicated department that purchases new and used hydraulic units on a daily basis. We are constantly replenishing our supply with fast moving units to insure we have the product when you need it.

We also research and stock a large surplus of obsolete and rare units. You may think that your unit is so old that no one could possibly carry it. Give us a call. We may have had it sitting on our shelves just for this moment.

We pay cash for used & unused hydraulic pumps, motors, valves, and components daily. Contact us if you are looking to get rid of surplus or cores you are no longer using.

NRI Industrial is an established source for new, used, second-hand, refurbished & surplus hydraulic pumps & other industrial parts & equipment. Our inventory of hydraulic pumps includes hydraulic gear pumps, hydraulic piston pumps, hydraulic plunger pumps, hydraulic screw pumps, hydraulic vane pumps and much more.

…pump hydraulic manifold: 1801, 1811, 1821, 1841, 2030, 2130, 4030 4 cylinder, 4040, 4130 4 cylinder (1953-1964) ] * Can replace vane style pump by using the FDS074 hydraulic line* For early tractors when changing from a vane pump, you may also need ABC523 and ABC538 oil pressure line kit for pump…

International / Farmall - Fits: [ H, HV (using belly mounted hydraulic pump) ], [ Super H, Super HV (using belly mounted hydraulic pump; up to SN: 19233) ]; Replaces: 15091EX The length of this rod is 38" long and the O.D is 3/8".

…live hydraulic pump) ], [ 300, 350 (when using Thompson live hydraulic pump; gas, LP or diesel) ]; Replaces: 352439R1, 352439R2 Note: Fits pump 363779R91, 363779R92, 363779R93, 363779R94, 366823R91, 366823R92, 366823R93 (the pump number is stamped into the aluminum upper pump housing). * Use with…

…[ 202, 203, 204, 205, 302, 304 (using 184473M93 hydraulic pump) ] Massey Ferguson - Fits: [ 168, 50, 65 (using 184473M93 hydraulic pump) ], 35 (diesel (SN: 231715 and up) using 184473M93 hydraulic pump), 35 (gas (SN: 230456 and up) using 184473M93 hydraulic pump); Replaces: 830997M1, 830997M91,…

…535, 540 (all using 9/16" O.D. pistons with engine mounted piston type hydraulic pump, 1965 - 4/1983) ] * 9/16" O.D.* 6 used per piston* Sold individuallyNote: Fits pump body # C5NN882E, C7NN882D. Verify piston O.D. as 2 different diameters were used on some models. * 9/16" O.D.* 6 used per piston*…

…O.D.* 6 used per piston* Sold individually* Fits pump body B9NN882B, C5NN882C, C0NN882B.All models using 5/8" O.D. pistons, with engine mounted piston type hydraulic pump, 1953 - 4/1983. Note: Models 1965 and up, measure old piston before ordering as 2 different diameters were used on some models.…

…Ferguson - Fits: [ F40, FE35, TO35, 35, 50, 65 (using 10 spline, 1-3/8" diameter camshaft and 0.091" pistons and strainer, 2300-2800 PSI) ]; Replaces: 184473M91, 184473M92, 184473M93 This kit is designed to rebuild 184473M93 (MFS3751) hydraulic pump. * 7-3/4" width* 5-1/2" height* 12-1/2" overall…

International / Farmall - Fits: [ M, Super M, 400, 450 (Gas or Diesel) ], Super W6, Super W9, Super WD6, Super WD9, W6, W9, WD6, WD9, 600, 650 * Must use rubber hose lines * 3/4" NPT inlet and outlet* Threaded for hydraulic hose

…vane hydraulic pump with 5/8" wide vanes); Replaces: 1E4506, 1E4507, 1ES4505, ES4505 Oliver Industrial - Fits: [ 551, 552 (Early, using 1ES2043 1500 Psi square vane hydraulic pump with 5/8" wide vanes) ] * 5/8" (0.6250") wide vanes* Measure before ordering as 2 different sizes could be used* For…

…models using Piston type hydraulic pump using tapered bearings, will not fit Pump # NAA600C, or Fits pumps with tapered bearing style pump shaft, it will not fit pumps with roller bearing style pump shaft) ], [ 4030 4 cylinder, 4130 4 cylinder (1953 - 1964 using piston type hydraulic pump) ] Fordson…

Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952) ]; Replaces: 194354 * Use with ABC1809 adapter* Use with ABC021 crankshaft pulley* Used with Ford pump drive kits # 19-22, 19-23 * 13" long* 3/4" outside diameter* 1 end has 6 splines* Other end has 0.187" keywayMeasure before ordering.

Ford - Fits: [ following with 720 Ford loader using 19-251 pump drive kit: 2000 4 cylinder, 2120, 4000 4 cylinder, 4120 (1962-1964) ]; Replaces: 197118 Ford Industrial - Fits: [ following with 720 Ford loader using 19-251 pump drive kit: 2030, 2130, 4030 4 cylinder, 4130 4 cylinder (1962-1964) ] *…

…1953 - 1964 with piston type hydraulic pump with tapered bearings) ] * Services 1953-1964 (4 cyl) gas and diesel tractors using piston type pump.* Note: Piston type pump has replaced vane type pump in many early models.* Kit includes:* (6) 313063 light piston spring use with Jubilee and NAA only*…

…900, 940, 950, 960 (1954 to 1955, up to SN: 66849 using square vane pump with 3/4" wide vanes) ]; Replaces: Assembly: CPN972C, Vane set: CPN981B, (2) O-Rings: EAF980A, Ring: NAA973-A Oliver - Fits: 550 (with 101975AS (1700 PSI) square vane pump with 3/4" wide vanes); Replaces: 102015AS, 102016A,…

Hydraulic pumps deliver high-pressure fluid flow to the pump outlet. Hydraulic pumps are positive displacement pumps which pressurize hydraulic fluid in order to do work.