oliver 1755 hydraulic pump factory
New, aftermarket Oliver 1755 Hydraulic Pump for sale with a solid manufacturer warranty. In addition, we have a generous 30-day return policy if this item needs to be returned for any reason. Please see our Parts Warranty and Return Policy links for complete details before returning.
Yesterday"s Tractor Co. has spent many years locating the correct parts for your Oliver 1755 tractor. Our extensive research has helped us identify these parts and make them available through our online catalogs. If you can"t locate what you need or have questions feel free to call us.
ABOUT THIS PAGE: You are viewing the product page for our Oliver 1755 hydraulic pump. As one of the largest suppliers of new and rebuilt Oliver 1755 tractor parts we most likely have the parts you need. Use the information above including the hydraulic pump part number and picture (if available) to assist you in making your decision to purchase. If you are looking for a different hydraulic pump, or have trouble locating the Oliver 1755 parts you need, we have MANY parts that are not listed on our website so feel free to contact us.
Our New Replacement M-30-3023710 Hydraulic System Shield Cover is for Oliver 1755, 1855, 1955, 2255 and White 2-150, 2-85, 2-105 tractors. The first photo shows this shield mounted on our Oliver 1755 (sorry but this is our working tractor--not a show machine). This replaces Oliver/White part #30-3023710, Shield (for reference only). This is the shield that protects your hydraulic pump and fitting/hosed under the platform on the clutch petal side of the platform. It is a duplicate not only of the dimensions of the part, but relief cut geometry and radii, bend radii, number of spot welds, spot weld locations, and material thickness. What this means to you is once you install our cover, it will difficult to determine that it is anything but an original part that came on your tractor. Included with your shield is 4 SEMS fasteners which have captive external tooth lock washers just like the originals used by Oliver/White. This will make the look of this shield as close to factory installed as possible.
Western IowaHave a 1755 oliver with loader. Loader raises fine but when lowered, it comes down jerky and rough (not smooth) and the hydraulics make kind of a whining, buzzing, growling noise. Tractor has plenty of fluid and I have cycled the loader up and down. I added the loader and it has always done this for me. Any ideas. Thanks alot.
The Oliver 1755 is equipped with one of two engines: a 5.1 L (310.0 cu·in) six-cylinder diesel engine or a 4.6 L (283.0 cu·in) six-cylinder gasoline engine and one of two transmissions: a gear type transmission with 6 forward and 2 reverse gears or a partial power shift transmission with 18 forward and 6 reverse gears.
Waukesha-Oliver. It is a 5.1 L, 5,080 cm2, (310.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 111.0 mm (4.37 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 87.2 PS (64.1 kW; 86.0 HP) of PTO output power.
Waukesha-Oliver. It is a 4.6 L, 4,638 cm2, (283.0 cu·in) six-cylinder natural aspirated gasoline engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 8.5:1. This engine produced 87.2 PS (64.1 kW; 86.0 HP) of PTO output power.
The Oliver 1755 is equipped with power steering, differential hydraulic dry disc brakes, open operator station (two-post ROPS or cab available as an option), and 132.5 liters (35 US gal.; 29.1 Imp. gal) fuel tank.
oliver 1755,1855,1955,2255 farm tractor factory hydraulic cover VERY NICE!!!!. This is a very very nice factory original hydraulic control cover for an Oliver 1755,1855,1955, and 2255. There are No cracks or welds.